e*****n
发帖数: 109 | 1 Any suggestions greatly appreciated. Here's the brief overview, I have got a
IBM blade 4-port-switch. It is divided into 2 port channels. One port channel
connected to DMZ switch, the other connected to a internal 6509E switch. We
have an ASA with its internal interface terminated at 6509E.
From any one of the internal blade server, I can ping vlan interface of the
6509E and other internal hosts but unable to ping the ASA interface.
On the other hand, ASA can ping the IBM Blade switch but can't | z**r
发帖数: 17771 | 2 should not be a hard issue, but please attach a topology here
channel
the
am
【在 e*****n 的大作中提到】
: Any suggestions greatly appreciated. Here's the brief overview, I have got a
: IBM blade 4-port-switch. It is divided into 2 port channels. One port channel
: connected to DMZ switch, the other connected to a internal 6509E switch. We
: have an ASA with its internal interface terminated at 6509E.
: From any one of the internal blade server, I can ping vlan interface of the
: 6509E and other internal hosts but unable to ping the ASA interface.
: On the other hand, ASA can ping the IBM Blade switch but can't
| e*****n
发帖数: 109 | 3
(Blade server 10.128.7.113/16 connected for testing)
|
IBM Blade Switch (4 port, Runs Cisco IOS)
po1 / / \ \ po2
/ / \ \
DMZ CAT 4003 Internal CAT 6509E (vlan int addr ..0.13
)
\ /
\ / | z**r
发帖数: 17771 | 4 you said the the blade switch is 4-port switch, where is the fifth port for
blade server? and what is the configuration on it? I assume it's on the same
vlan as po2?
also it doesn't seem like a layer 3 issue, so please post all the mac table
information on the blade swith, the blade server, the 6509 switch, and ASA if
possible
13
【在 e*****n 的大作中提到】
:
: (Blade server 10.128.7.113/16 connected for testing)
: |
: IBM Blade Switch (4 port, Runs Cisco IOS)
: po1 / / \ \ po2
: / / \ \
: DMZ CAT 4003 Internal CAT 6509E (vlan int addr ..0.13
: )
: \ /
: \ /
|
|
