R**R
发帖数: 3318 | 1 Material: 4’x8’ pre-finished particle board.
Cost: less than $200.
Tools: circular saw, drill, hole saw and router.
Time: 1 week after daily work.
For DIY ability level 2. (Scale 0 to 5)
More detail will come if some people interest.
帮朋友在basement做的。 |
g*****9
发帖数: 4125 | 2 More detail please?
Thank you.
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
c*****l
发帖数: 631 | |
S***e
发帖数: 4426 | 4 厉害
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
a***u
发帖数: 335 | 5 very nice.
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
p**f
发帖数: 2610 | 6 这个做的挺好.
我没用过particle board,有几个问题.
(1) particle board切面是不是veneer?
(2) 板之间连接,你是用router开槽然后粘上的吗?还是用hardware固定?
(3) 照片上看不太清楚,架子固定在墙上时,下面还有支撑吗?还是就是靠screw?
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
p**f
发帖数: 2610 | 7 还有,你的书架背面也是particle board吗?
我一般都用clear pine做这类的东西. particle board,我一个人都搬不动. |
p**f
发帖数: 2610 | 8 RWKR,你能不能开个DIY俱乐部,把我加进去,大家可以讨论些设计,技术方面问题. |
R**R
发帖数: 3318 | 9
是plastic veneer. 用电熨斗烫上，router to finish.
桌面太大，用hardware固定，以后拆卸，挪动方便。
右边的架子坐在basement的水泥墙上。这个basement，有一半以上在地上。窗以上是木
墙，窗以下是水泥墙。
左边是落地的柜子。
【在 p**f 的大作中提到】
: 这个做的挺好.
: 我没用过particle board,有几个问题.
: (1) particle board切面是不是veneer?
: (2) 板之间连接,你是用router开槽然后粘上的吗?还是用hardware固定?
: (3) 照片上看不太清楚,架子固定在墙上时,下面还有支撑吗?还是就是靠screw?
|
s********h
发帖数: 938 | 10 PFPF，强烈要求发细节。
【在 g*****9 的大作中提到】
: More detail please?
: Thank you.
|
|
|
R**R
发帖数: 3318 | 11 书架背面，我一般用1/8" 厚的Panel。 便宜。
书架背面，我一般用1/8" 厚的Panel。 便宜。
you can ask HD pre-cut. 到家后do finish cuting.
需要有木纹的东西，我一般用oak plywood with solid oak 的边框。
【在 p**f 的大作中提到】
: 还有,你的书架背面也是particle board吗?
: 我一般都用clear pine做这类的东西. particle board,我一个人都搬不动.
|
p**f
发帖数: 2610 | 12 右边那half wall外面是什么东西? panel?怎么尺寸都不均匀?
【在 R**R 的大作中提到】
: 书架背面，我一般用1/8" 厚的Panel。 便宜。
:
: 书架背面，我一般用1/8" 厚的Panel。 便宜。
: you can ask HD pre-cut. 到家后do finish cuting.
: 需要有木纹的东西，我一般用oak plywood with solid oak 的边框。
|
R**R
发帖数: 3318 | 13 好主意。
不过在这可能会有更多人受益。即使不DIY的人，也会有启发。你说呢？
再说，我也不知如何弄。不过你要开，我加入，再把gezhi89 也叫进来。
【在 p**f 的大作中提到】
: RWKR,你能不能开个DIY俱乐部,把我加进去,大家可以讨论些设计,技术方面问题.
|
r****o
发帖数: 3932 | 14 狂赞，去开个木工俱乐部吧，俺加入
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
e********t
发帖数: 9607 | 15 真是快好省，你是去哪里买particle board，便宜吗？
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
R**R
发帖数: 3318 | 16 外边是院子地上。这个basement 一半多在地上。
外边是院子地上。这个basement 一半多在地上。
panel?怎么尺寸都不均匀?
Paneling 是1/8”厚，4'x8'.有plywood,也有fiber board. 做finish墙用的。
【在 p**f 的大作中提到】
: 右边那half wall外面是什么东西? panel?怎么尺寸都不均匀?
|
p**f
发帖数: 2610 | 17 开俱乐部需要100伪币,但前一阵子,我把伪币都捐到fishing版了.
【在 R**R 的大作中提到】
: 好主意。
: 不过在这可能会有更多人受益。即使不DIY的人，也会有启发。你说呢？
: 再说，我也不知如何弄。不过你要开，我加入，再把gezhi89 也叫进来。
|
c*******e
发帖数: 9475 | 18 好漂亮！请问书架侧板上的洞洞都是自己打的，还是买的打好
洞的板子？ |
Q***N
发帖数: 2972 | 19 computer monitor is..... :-) |
R**R
发帖数: 3318 | 20 100伪币没问题。咱募集。
你也钓鱼吗？salt water or fresh water?
【在 p**f 的大作中提到】
: 开俱乐部需要100伪币,但前一阵子,我把伪币都捐到fishing版了.
|
|
|
g*****9
发帖数: 4125 | 21 I think it is bought that way.
【在 c*******e 的大作中提到】
: 好漂亮！请问书架侧板上的洞洞都是自己打的，还是买的打好
: 洞的板子？
|
p**f
发帖数: 2610 | 22 以前钓的很多,为了玩,现在少了,只有家里有人想吃鱼的时候,才去钓一条,为了吃.
主要是saltwater.你应该去fishing版上晃晃,这两年钓鱼的人突然多起来了.
【在 R**R 的大作中提到】
: 100伪币没问题。咱募集。
: 你也钓鱼吗？salt water or fresh water?
|
R**R
发帖数: 3318 | 23 古董。哈哈。
刚做完，好几年前照的。
【在 Q***N 的大作中提到】
: computer monitor is..... :-)
|
K**********r
发帖数: 2640 | 24 问一下呀，你这帮朋友做，是纯帮吗？是的话。俺在考虑要不要搬到你家边上住
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
R**R
发帖数: 3318 | 25 你得排队了，前面已有十几个了。
【在 K**********r 的大作中提到】
: 问一下呀，你这帮朋友做，是纯帮吗？是的话。俺在考虑要不要搬到你家边上住
|
g*****9
发帖数: 4125 | 26 I just checked, a DIY club already exist.
Anyway, does it cost 100 to start a new club or 1000 to start? I have not
started a club before.
I would be happy to contribute all I got, I have no use for them.
【在 p**f 的大作中提到】
: RWKR,你能不能开个DIY俱乐部,把我加进去,大家可以讨论些设计,技术方面问题.
|
p**f
发帖数: 2610 | 27 刚转给你60伪币,我只有这么多了.
【在 R**R 的大作中提到】
: 100伪币没问题。咱募集。
: 你也钓鱼吗？salt water or fresh water?
|
R**R
发帖数: 3318 | 28 Same here. I would be happy to contribute too.
【在 g*****9 的大作中提到】
: I just checked, a DIY club already exist.
: Anyway, does it cost 100 to start a new club or 1000 to start? I have not
: started a club before.
: I would be happy to contribute all I got, I have no use for them.
|
K**********r
发帖数: 2640 | 29 支持
【在 R**R 的大作中提到】
: Same here. I would be happy to contribute too.
|
c****8
发帖数: 807 | 30 哇，实在是强。
我很好奇做这些东西不需要花时间吗，好像楼主隔几天就整一个东西。我老公除了看文
献有时间，其余干什么都没时间。唉！
看个俱乐部吧，我也想学！ |
|
|
f********l
发帖数: 1473 | 31 I have $129.60 to donate...let me know.
【在 p**f 的大作中提到】
: 开俱乐部需要100伪币,但前一阵子,我把伪币都捐到fishing版了.
|
R**R
发帖数: 3318 | 32 大小主要决定于房间。图中尺寸仅供参考。书架我想大家一看就明白了。书柜就是在书
架的基础上装个门。
材料： 3/4”x 48”x 96” white particle board . About $18 each.
The board切面用plastic veneer cover，用电熨斗烫上，router to finish.
【在 g*****9 的大作中提到】
: More detail please?
: Thank you.
|
h********y
发帖数: 3778 | 33 呵呵我要申请加入。以后就泡你们俱乐部啦
你跟gezhi89当版主～
【在 R**R 的大作中提到】
: 好主意。
: 不过在这可能会有更多人受益。即使不DIY的人，也会有启发。你说呢？
: 再说，我也不知如何弄。不过你要开，我加入，再把gezhi89 也叫进来。
|
h********y
发帖数: 3778 | 34 我也有好多钱钱，可以贡献~
【在 f********l 的大作中提到】
: I have $129.60 to donate...let me know.
|
b******e
发帖数: 3821 | |
Q******i
发帖数: 551 | 36 我也报名
【在 R**R 的大作中提到】
: 100伪币没问题。咱募集。
: 你也钓鱼吗？salt water or fresh water?
|
p*********w
发帖数: 23432 | 37 不错
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
w***t
发帖数: 8175 | |
M**6
发帖数: 308 | 39 我也要紧密团结在以单爷为核心的ＤＩＹ俱乐部周围～ |
g*****9
发帖数: 4125 | 40 I assume the modesty panel between 2A is (18 inch wide - saw blade width)?
Or the drawing is to scale?
【在 R**R 的大作中提到】
: 大小主要决定于房间。图中尺寸仅供参考。书架我想大家一看就明白了。书柜就是在书
: 架的基础上装个门。
: 材料： 3/4”x 48”x 96” white particle board . About $18 each.
: The board切面用plastic veneer cover，用电熨斗烫上，router to finish.
|
|
|
m**********2
发帖数: 6568 | 41 good job!
but your friend needs better monitors.
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
D*r
发帖数: 1298 | 42 报名先。
【在 R**R 的大作中提到】
: 好主意。
: 不过在这可能会有更多人受益。即使不DIY的人，也会有启发。你说呢？
: 再说，我也不知如何弄。不过你要开，我加入，再把gezhi89 也叫进来。
|
R**R
发帖数: 3318 | 43 You are right. 48”(原板宽)-30”(桌面宽)=18”
【在 g*****9 的大作中提到】
: I assume the modesty panel between 2A is (18 inch wide - saw blade width)?
: Or the drawing is to scale?
|
g*****9
发帖数: 4125 | 44 Did you cut all those with a circular saw, why not a table saw?
what about the 45 degree cut where monitor sits on?
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
R**R
发帖数: 3318 | 45
4'x8'is too big for my table.
Drill two holes with hole saw first, then circular saw to cut off, router to
finish.
【在 g*****9 的大作中提到】
: Did you cut all those with a circular saw, why not a table saw?
: what about the 45 degree cut where monitor sits on?
|
g*****9
发帖数: 4125 | 46
4'x8'is too big for my table.
Did you clamp on another piece as a rip fence or do you free hand?
Drill two holes with hole saw first, then circular saw to cut off, router to
finish.
So the corner are little round (not sharp 135 degree)?
【在 g*****9 的大作中提到】
: Did you cut all those with a circular saw, why not a table saw?
: what about the 45 degree cut where monitor sits on?
|
R**R
发帖数: 3318 | 47
Free hand. because I have to use router to finish later.
to
【在 g*****9 的大作中提到】
:
: 4'x8'is too big for my table.
: Did you clamp on another piece as a rip fence or do you free hand?
: Drill two holes with hole saw first, then circular saw to cut off, router to
: finish.
: So the corner are little round (not sharp 135 degree)?
|
T*J
发帖数: 443 | |
R**R
发帖数: 3318 | 49 加个3/4x 3/4”的木条或角铝（from HD),用螺丝从下面固定。
【在 T*J 的大作中提到】
: A板和面板用什么固定连接的？
|
T*J
发帖数: 443 | 50 particle board应该用什么锯片呢
在 RWKR (单爷) 的大作中提到: 】
to |
|
|
g****a
发帖数: 1040 | 51 赞!比买的都好!
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
g****a
发帖数: 1040 | 52 我也要参加.
【在 R**R 的大作中提到】
: 好主意。
: 不过在这可能会有更多人受益。即使不DIY的人，也会有启发。你说呢？
: 再说，我也不知如何弄。不过你要开，我加入，再把gezhi89 也叫进来。
|
g*****9
发帖数: 4125 | 53
This step could still be difficult for beginner to do it free hand, if I
understand you correctly, on the 45 degree cut, you have to pull the guard
back with one hand while cut down into the board between two holes. This
require a very steady hand. I don't think I will attempt that myself. I
would have used a jig saw for sure.
But thanks for sharing.
【在 R**R 的大作中提到】
: 加个3/4x 3/4”的木条或角铝（from HD),用螺丝从下面固定。
|
g*****9
发帖数: 4125 | 54 If you are only a beginner and don't really care about the look of your
basement, you can buy used cubicle suface pretty cheap. Basically they are
almost the same size as the ones made here, since you don't want to use the
walls, you only have to make the stands to support them (see drawing from
RWKR). The cubicle suface board have steel backing to it, so they are very
strong. Most used cubicle come from company that have moved to a new office
and you can buy used office furniture dealers all th
【在 g****a 的大作中提到】
: 赞!比买的都好!
|
i****a
发帖数: 36252 | 55 you need some LCD monitors : ]
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
R**R
发帖数: 3318 | 56 Very good question.
Depends on your circular saw, if it is 7-1/4” diameter, you need at less 40
tooth carbide finishing saw blade.
I allways keep a new blade for finishing cutting.
【在 T*J 的大作中提到】
: particle board应该用什么锯片呢
: 在 RWKR (单爷) 的大作中提到: 】
: to
|
R**R
发帖数: 3318 | 57 You may right.
I have a 5-1/2” cord circular saw. It is light weight, powerful and easy to
handle.
【在 g*****9 的大作中提到】
: If you are only a beginner and don't really care about the look of your
: basement, you can buy used cubicle suface pretty cheap. Basically they are
: almost the same size as the ones made here, since you don't want to use the
: walls, you only have to make the stands to support them (see drawing from
: RWKR). The cubicle suface board have steel backing to it, so they are very
: strong. Most used cubicle come from company that have moved to a new office
: and you can buy used office furniture dealers all th
|
s*******d
发帖数: 4135 | 58 家具做得很好，电脑很锉
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
R*****r
发帖数: 63 | 59 俺每次看你的showoff 都把你恨得咬牙切齿，天下还有你不能DIY的吗？
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
g******y
发帖数: 264 | 60 support!!! I will contribute weibi to DIY club. Thanks for sharing your work
. It is really pretty. I want to learn how to do the wood work. Let me know
when you guys will open the club. Thank you very much! |
|
|
B*******S
发帖数: 2379 | |
Q*****y
发帖数: 165 | 62 替ld报个名！
【在 R**R 的大作中提到】
: 好主意。
: 不过在这可能会有更多人受益。即使不DIY的人，也会有启发。你说呢？
: 再说，我也不知如何弄。不过你要开，我加入，再把gezhi89 也叫进来。
|
R**R
发帖数: 3318 | 63 欢迎各界人士，当然也包括六姨太。不过DIY都是力气活儿。要不您就帮收个钱，连个
活儿什么的？对，公关部经理。您看咋样？
【在 M**6 的大作中提到】
: 我也要紧密团结在以单爷为核心的ＤＩＹ俱乐部周围～
|
R**R
发帖数: 3318 | 64 多谢信任。我真是没时间。怕辜负大家。你办我和gezhi支持你。
【在 p**f 的大作中提到】
: 刚转给你60伪币,我只有这么多了.
|
g*****9
发帖数: 4125 | 65 I will fully support this group too if I have time, my business will pick up
after it gets a little warmer here, not sure how much time I can devote to
it. But DIY club already exist, what do you all think we should name our
group? I am thinking "DIYer" (自己动手，省钱放心)
【在 R**R 的大作中提到】
: 多谢信任。我真是没时间。怕辜负大家。你办我和gezhi支持你。
|
D*r
发帖数: 1298 | 66 LivingDIY?
pick up
to
【在 g*****9 的大作中提到】
: I will fully support this group too if I have time, my business will pick up
: after it gets a little warmer here, not sure how much time I can devote to
: it. But DIY club already exist, what do you all think we should name our
: group? I am thinking "DIYer" (自己动手，省钱放心)
|
m******n
发帖数: 80 | 67 how about "handyman"?
up
to
【在 g*****9 的大作中提到】
: I will fully support this group too if I have time, my business will pick up
: after it gets a little warmer here, not sure how much time I can devote to
: it. But DIY club already exist, what do you all think we should name our
: group? I am thinking "DIYer" (自己动手，省钱放心)
|
o****d
发帖数: 1346 | |
h***e
发帖数: 866 | 69 相当牛，btw，电脑显示器该换了
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
n**********1
发帖数: 1534 | 70 刚买了房，也想diy这个，能给细节不？
也想加入俱乐部！ |
|
|
M**6
发帖数: 308 | 71 抬爱了，我连怎么发包子都不会：）我倒是可以组织个啦啦队，给长工们加油助威，确
保他们在您的带领下，坚持走ＤＩＹ发展道路，将ＤＩＹ事业发扬光大！
【在 R**R 的大作中提到】
: 欢迎各界人士，当然也包括六姨太。不过DIY都是力气活儿。要不您就帮收个钱，连个
: 活儿什么的？对，公关部经理。您看咋样？
|
W****n
发帖数: 1373 | |
m*******a
发帖数: 192 | 73 牛人呀！！！
这就是我想要的，当然我家书房小，我只想要一面墙的挂柜和下面的桌子。请开班收徒
详细讲解！
谢谢单爷。
【在 R**R 的大作中提到】
: Material: 4’x8’ pre-finished particle board.
: Cost: less than $200.
: Tools: circular saw, drill, hole saw and router.
: Time: 1 week after daily work.
: For DIY ability level 2. (Scale 0 to 5)
: More detail will come if some people interest.
: 帮朋友在basement做的。
|
R**R
发帖数: 3318 | 74 啦啦队需要好嗓子，要不您先来段小曲儿？
【在 M**6 的大作中提到】
: 抬爱了，我连怎么发包子都不会：）我倒是可以组织个啦啦队，给长工们加油助威，确
: 保他们在您的带领下，坚持走ＤＩＹ发展道路，将ＤＩＹ事业发扬光大！
|
p**f
发帖数: 2610 | 75 I just created a club called 动手(Handyman)俱乐部.
not access limits, any DIYer is welcome.
to
【在 R**R 的大作中提到】
: You may right.
: I have a 5-1/2” cord circular saw. It is light weight, powerful and easy to
: handle.
|
R**R
发帖数: 3318 | 76 麻利。
如何参加？
Thanks.
【在 p**f 的大作中提到】
: I just created a club called 动手(Handyman)俱乐部.
: not access limits, any DIYer is welcome.
:
: to
|
g*****9
发帖数: 4125 | 77 You should call it handy person or people, some of us here are not man.
【在 p**f 的大作中提到】
: I just created a club called 动手(Handyman)俱乐部.
: not access limits, any DIYer is welcome.
:
: to
|
R**R
发帖数: 3318 | 78 在这man是个尊称。很多girl喜欢。你要叫她娘们儿，她还不爱听。
不信你叫一个：这个手巧的小娘们儿。她非跟你急。
【在 g*****9 的大作中提到】
: You should call it handy person or people, some of us here are not man.
|
R**R
发帖数: 3318 | 79 对了，你要是拍着那个girl的肩膀说，够哥们儿。她知道你在夸她。不会说，我是女的。
在 gezhi89 (zhonda) 的大作中提到: 】
【在 R**R 的大作中提到】
: 在这man是个尊称。很多girl喜欢。你要叫她娘们儿，她还不爱听。
: 不信你叫一个：这个手巧的小娘们儿。她非跟你急。
|
r*****q
发帖数: 1511 | |
|
|
p**f
发帖数: 2610 | 81 Same as in fisherman, fisherwoman does not exist in the dictionary.
【在 g*****9 的大作中提到】
: You should call it handy person or people, some of us here are not man.
|
p**f
发帖数: 2610 | 82 just go in the club section, search for Handyman and join.
【在 R**R 的大作中提到】
: 麻利。
: 如何参加？
: Thanks.
|
g*****9
发帖数: 4125 | 83 Poof, I am just giving you a hard time, hope you don't mind.
Anyway, what kind of dictionary do you use, 100 year old one?
http://www.merriam-webster.com/dictionary/fisherwoman
http://dictionary.reference.com/browse/fisherwoman
You can also google "handy person" or "handy woman" too.
【在 p**f 的大作中提到】
: Same as in fisherman, fisherwoman does not exist in the dictionary.
|
p**f
发帖数: 2610 | 84 This is mind opening, never heard of it, interesting.
A man(or woman) should never stop learning.
But the problem here is that once the clue is created. the name could not
be changed again. I guess they use that name for the keyword/ID in the
system.
【在 g*****9 的大作中提到】
: Poof, I am just giving you a hard time, hope you don't mind.
: Anyway, what kind of dictionary do you use, 100 year old one?
: http://www.merriam-webster.com/dictionary/fisherwoman
: http://dictionary.reference.com/browse/fisherwoman
: You can also google "handy person" or "handy woman" too.
|
g*****9
发帖数: 4125 | 85 Hey no problem. Congrats on the New Club, but I am starting my 年夜饭 prep
now, Wish everyone here a wonderful Tiger year.
【在 p**f 的大作中提到】
: This is mind opening, never heard of it, interesting.
: A man(or woman) should never stop learning.
: But the problem here is that once the clue is created. the name could not
: be changed again. I guess they use that name for the keyword/ID in the
: system.
|
R**R
发帖数: 3318 | 86 Hey,Hey,Hey,
我们还给资本家干活呢，你就要吃年夜饭啦。这世道也太不公平了。
anyway,
Wish you have a wonderful Tiger year too.
【在 g*****9 的大作中提到】
: Hey no problem. Congrats on the New Club, but I am starting my 年夜饭 prep
: now, Wish everyone here a wonderful Tiger year.
|
g*****9
发帖数: 4125 | 87 I work for myself, so sometime I will starve when business is bad. 年夜饭 is
tomorrow, I will start cooking the cold dishes today.
Wish you and everyone here a successful DIY Tiger year.
【在 R**R 的大作中提到】
: Hey,Hey,Hey,
: 我们还给资本家干活呢，你就要吃年夜饭啦。这世道也太不公平了。
: anyway,
: Wish you have a wonderful Tiger year too.
|
R**R
发帖数: 3318 | 88 How big the party will be? Making you start cooking the dishes today.
Enjoy.
is
【在 g*****9 的大作中提到】
: I work for myself, so sometime I will starve when business is bad. 年夜饭 is
: tomorrow, I will start cooking the cold dishes today.
: Wish you and everyone here a successful DIY Tiger year.
|
g*****9
发帖数: 4125 | 89 Around 250 (a lot of them are kids, they get the costco stuff). Just 10 cold
plate dishes, should not take that long, I hired a few helper from a local
Chinese restaurant to help out (mostly cutting and washing). I will do the
cooking, been looking forward to this for a while.
【在 R**R 的大作中提到】
: How big the party will be? Making you start cooking the dishes today.
: Enjoy.
:
: is
|
p**f
发帖数: 2610 | 90 250? speaking of party!
cold
local
the
【在 g*****9 的大作中提到】
: Around 250 (a lot of them are kids, they get the costco stuff). Just 10 cold
: plate dishes, should not take that long, I hired a few helper from a local
: Chinese restaurant to help out (mostly cutting and washing). I will do the
: cooking, been looking forward to this for a while.
|
|
|
g*****9
发帖数: 4125 | 91 I kind of mix business with pleasure, the party is actually help to show
case the kitchen and bath room stuff I will try to sell to them later. I
usually benefit more from it than the amount work I do for it.
【在 p**f 的大作中提到】
: 250? speaking of party!
:
: cold
: local
: the
|
g****a
发帖数: 1040 | 92 谢谢! 哪里去找这样的dealer?
我家的地下室太矮,不会去动大工程的.
不过可以做些简单的架子放工具,小孩玩具什么的.
the
office
that
.
【在 g*****9 的大作中提到】
: If you are only a beginner and don't really care about the look of your
: basement, you can buy used cubicle suface pretty cheap. Basically they are
: almost the same size as the ones made here, since you don't want to use the
: walls, you only have to make the stands to support them (see drawing from
: RWKR). The cubicle suface board have steel backing to it, so they are very
: strong. Most used cubicle come from company that have moved to a new office
: and you can buy used office furniture dealers all th
|
g*****9
发帖数: 4125 | 93 You can google [used cubicles "your city name"]
【在 g****a 的大作中提到】
: 谢谢! 哪里去找这样的dealer?
: 我家的地下室太矮,不会去动大工程的.
: 不过可以做些简单的架子放工具,小孩玩具什么的.
:
: the
: office
: that
: .
|
v**a
发帖数: 366 | 94 每次看你的帖子，都受不了。为什么为什么我不会做！ |
R**R
发帖数: 3318 | 95 革命分工不同。
有工人，当然也需要领导。
【在 v**a 的大作中提到】
: 每次看你的帖子，都受不了。为什么为什么我不会做！
|
b***p
发帖数: 1398 | 96 For DIY ability level 2. (Scale 0 to 5)
If you were 2, I'd be -3 |
R**R
发帖数: 3318 | 97 会用锯，钻。1.
会用锯，钻，简单用router. 2.
会用锯，钻，简单用router, plate joiner, plater. 3.
会用锯，钻，较复杂用router, plate joiner, plater。 4.
自己设计，自己施工。5.
我想你用锯，钻，简单用router，应该不是问题。
【在 b***p 的大作中提到】
: For DIY ability level 2. (Scale 0 to 5)
: If you were 2, I'd be -3
|
g*****9
发帖数: 4125 | 98 Should add 0. Can only use hammer, no saw or drill.
【在 R**R 的大作中提到】
: 会用锯，钻。1.
: 会用锯，钻，简单用router. 2.
: 会用锯，钻，简单用router, plate joiner, plater. 3.
: 会用锯，钻，较复杂用router, plate joiner, plater。 4.
: 自己设计，自己施工。5.
: 我想你用锯，钻，简单用router，应该不是问题。
|
R**R
发帖数: 3318 | 99 年夜饭做完了？
别忘了送个picture,也让我们享受一下你们party的气氛。
对了，忘了hammer了。
那用hammer往手上砸的，算几呀？
【在 g*****9 的大作中提到】
: Should add 0. Can only use hammer, no saw or drill.
|
g*****9
发帖数: 4125 | 100 Still working on the last one, smoked fish (actually deep fried first and
soaked in sauce later).
Deep frying 60 lbs of buffalo carp steak is taking longer than I expected.
I am just taking a break now, my hands are too greasy to handle the camera
now, but will try to take a few when I get a chance.
【在 R**R 的大作中提到】
: 年夜饭做完了？
: 别忘了送个picture,也让我们享受一下你们party的气氛。
:
: 对了，忘了hammer了。
: 那用hammer往手上砸的，算几呀？
|
|
|
s*****p
发帖数: 91 | 101 niuuuuuuuuuuuuuuuuuuuuuuuuuuuu |
