g******e 发帖数: 313 | 1 moto e 1526, 一直上ringplus
root了,bootloader unlock了
今天把TWRP烧到启动选项里面
然后误用了深度格式化删除了手机内存里面的全部东西
现在机器启动只能显示bootloader unlock warning screen
是不是这个就没救了
还有什么办法从windows刷系统回手机吗? |
q**********r 发帖数: 465 | 2 怎么会没救呢?
如果TWRP还在,是肯定没问题。装系统呀。
如果 TWRP 不在了,把TWRP flash回去先不就行了?
【在 g******e 的大作中提到】 : moto e 1526, 一直上ringplus : root了,bootloader unlock了 : 今天把TWRP烧到启动选项里面 : 然后误用了深度格式化删除了手机内存里面的全部东西 : 现在机器启动只能显示bootloader unlock warning screen : 是不是这个就没救了 : 还有什么办法从windows刷系统回手机吗?
|
g*****2 发帖数: 863 | 3 没变砖,需要刷个app启动,因为bootloader改变了,屏蔽掉检测就能启动, |
c********y 发帖数: 1245 | 4 只要能进Bootload就没问题
1. 先去下个系统ROM
https://firmware.center/firmware/Motorola/Moto%20E%20%282nd%20gen-2015%29/
Stock/
2. Extract your stock firmware , eg : "XT1526_SURNIA_JAXTR_DS_5.1.1.........
.xml.zip ".
3. Copy the files into firmware folder of firmware flasher folder.
4. Press "Ctrl+Shift+Right Click" in firmware flasher folder and click "Open
Command Window Here".
5. Command Prompt opens , In it enter "flash_firmware-windows.bat".
6. Then Flasher asks you to install Drivers , If installed press "N" or else
press "Y" to install Moto drivers.
7. Then Connect you phone in "Boot Loader Mode" (Power off your Phone and
press "Power Button + Vol Down Button" to enter Boot Loader " ).
8. Then Press Enter to Start Flashing Your Stock Firmware which you copied
to firmware folder .
9. Press Enter after each file flashed make sure there is no error in
flashing each file so that you will not get stuck in bootloop .
那个flash_firmware-windows.bat如果有的话需要自己检查,它会一步一步刷每一个小
image, 别闭着眼直接刷, 如果没有则需要你自己建一个,XDA上有例子 |