由买买提看人间百态

topics

全部话题 - 话题: e520n
(共0页)
g***t
发帖数: 91
1
【 以下文字转载自 Hardware 讨论区 】
发信人: gvest (guest), 信区: Hardware
标 题: 求助:Dell E520N操作系统安装问题
发信站: BBS 未名空间站 (Wed Jun 6 20:07:34 2007)
刚收到我的Dell E520N,机器自己不带任何操作系统。我试图安装Windows XP,结果在
Windows is setting up之后,就出现兰屏,说
a error is detected and windows XP is shut down to prevent damage to the
computer, blah blah blah
Error message: 0X0000007B (0XF78EA63C, 0XC0000034, 0X0000000, 0X000000)
之后我试图安装和机器一起来的FreeDOS,也未果,在屏幕显示
1 Install FreeDOS
2 Go into FreeDOS from CD-rom
之后就没有任何反应了。
请问我应该怎么做才能安装上操作系统?还是这个机器有硬件问题
g***t
发帖数: 91
2
【 以下文字转载自 Hardware 讨论区 】
发信人: gvest (guest), 信区: Hardware
标 题: 求助:Dell E520N操作系统安装问题
发信站: BBS 未名空间站 (Wed Jun 6 20:07:34 2007)
刚收到我的Dell E520N,机器自己不带任何操作系统。我试图安装Windows XP,结果在
Windows is setting up之后,就出现兰屏,说
a error is detected and windows XP is shut down to prevent damage to the
computer, blah blah blah
Error message: 0X0000007B (0XF78EA63C, 0XC0000034, 0X0000000, 0X000000)
之后我试图安装和机器一起来的FreeDOS,也未果,在屏幕显示
1 Install FreeDOS
2 Go into FreeDOS from CD-rom
之后就没有任何反应了。
请问我应该怎么做才能安装上操作系统?还是这个机器有硬件问题
e****l
发帖数: 204
3
The same with my E520N.
It has something to do with the SATA hard-drive support. The Original WinXP
does not have SATA support. You have to install the SATA driver as third par
ty controller. It is said it requires a floppy drive. Or you can make a WinX
P install CD with the SATA driver.
Have not figured how to do that yet.
l*****e
发帖数: 20
4
来自主题: Hardware版 - 弱问一个显卡的问题
这两天买的dell e520n, 昨天还发文问安装问题的。多谢各位帮忙了!
目前的问题是,我通过显卡dvi output用dvi-hdmi cable连一个hdtv作为monitor.
发现最大分辨率是1024x768,而且图像有重影,有一个shift(右边有竖着的黑条,
左边则有些图标和开始键看不全)
显卡spec里有如下data:
Powered by GeForce 7300LE GPU
0.09 micron process technology
PCI-Express x16 interface support
4 Pixels/Clock Rendering Pipeline
400MHz RAMDACs support
2048x1536 resolution at 85Hz
Highest DVI output up to 1600x1200 resolution
Integrated full MPEG encode and decode support Integrated NTSC & PAL TV
encoder
output up to 1024x768 re
E******n
发帖数: 641
5
☆─────────────────────────────────────☆
photonth (幸福的大玩家) 于 (Fri Jun 8 09:53:20 2007) 提到:
不是改成normal, 应该是legacy或compatible吧

☆─────────────────────────────────────☆
oloolo (山村老尸之不腐传说) 于 (Fri Jun 8 18:02:32 2007) 提到:
will it affect the performance?
☆─────────────────────────────────────☆
leaveme (--) 于 (Sat Jun 9 20:18:45 2007) 提到:
我开始也遇到兰屏出错的现象,改了sata选项之后,变成
进入windows setup的三个选项页面(enter, R, 还有一个应该是取消)
之后按enter没反应。
试图装freedos也是,到了一个有若干选项的界面,就按啥都没反映了。。
是不是还有什么bios选项需要改啊???救命啊。。。。
d*******r
发帖数: 6
6
你的xp没有集成sata的驱动,估计是。
试试在安装前按F6还是F8先把驱动装好
(共0页)