boards

本页内容为未名空间相应帖子的节选和存档,一周内的贴子最多显示50字,超过一周显示500字 访问原贴
Automobile版 - inspection前轮松动
相关主题
有人买过厂家dealer以外的Extended Warranty吗?
最近车子方向盘一直抖动???
右前轮有摩擦声,唉又要送车铺了
同时修前轮strut和换前轮的LCA bushes,能省labor吗?
求助, 关于刹车
请教高手:关于悬挂系统
大家看看我的车子是什么问题
2000 camry前轮杂音请教
请教4WD如何检查wheel bearing
bearing的问题
相关话题的讨论汇总
话题: inspection话题: 松动话题: 前轮话题: rod话题: tie
进入Automobile版参与讨论
1 (共1页)
f**********g
发帖数: 88
1
去做inspection时,工人说前轮松动,还用手左右晃了晃以示证明,说是修理后才能通
过inspection。车开着没感觉到跑偏的问题。新手没经验,请高手给个指导。需要修吗
?修的话大概多少钱?
谢谢。
k*******q
发帖数: 5493
2
换家店再查一次

【在 f**********g 的大作中提到】
: 去做inspection时,工人说前轮松动,还用手左右晃了晃以示证明,说是修理后才能通
: 过inspection。车开着没感觉到跑偏的问题。新手没经验,请高手给个指导。需要修吗
: ?修的话大概多少钱?
: 谢谢。

D**C
发帖数: 331
3
前轮松动 is what?
Nuts on the wheel need to be tightened, or tie rod end, or cv joint?

【在 f**********g 的大作中提到】
: 去做inspection时,工人说前轮松动,还用手左右晃了晃以示证明,说是修理后才能通
: 过inspection。车开着没感觉到跑偏的问题。新手没经验,请高手给个指导。需要修吗
: ?修的话大概多少钱?
: 谢谢。

e*******l
发帖数: 1269
4
These damn mechanics play this trick all the time. I suspect the whole
inspection thing is just a conspiracy by them to make more money like this.
f**********g
发帖数: 88
5
谢谢建议。

【在 k*******q 的大作中提到】
: 换家店再查一次
f**********g
发帖数: 88
6
不懂,新手一点概念都没有啊。每一种大概需要多少钱?差别在哪里?自己能分辨吗?
谢谢。

【在 D**C 的大作中提到】
: 前轮松动 is what?
: Nuts on the wheel need to be tightened, or tie rod end, or cv joint?

f**********g
发帖数: 88
7
同感啊。

【在 e*******l 的大作中提到】
: These damn mechanics play this trick all the time. I suspect the whole
: inspection thing is just a conspiracy by them to make more money like this.

D**C
发帖数: 331
8
It all depends on what car you got, the cost can be free to very expensive.
Sometimes on older cars a nut/bolt that secure the tire can stress out and
break. So check nothing is missing or loose first.
After that, the wheel bearing could be worn, rack & pinion tie rod or tie
rod end could be worn, even control arm bearings/bushings could be old.
Based on your posting so far, you can not tell what is wrong yourself (other
than check for loose or missing lugs). Ask the shop to give you list of
item they find wrong and post back the finding here.

【在 f**********g 的大作中提到】
: 不懂,新手一点概念都没有啊。每一种大概需要多少钱?差别在哪里?自己能分辨吗?
: 谢谢。

e*******l
发帖数: 1269
9
所以平时就要固定跟一个稍微靠谱的店建立良好关系,换油换轮胎这种低技术含量的活
都照顾一下生意,跟service adviser在first name basis,他就不好意思这么搞了。
T*********0
发帖数: 1372
10
看来这种Tricky的小把戏还是家常便饭啊...
上次我去Inspection也是这样,还说是Control Arm坏了,开车很危险,换的话要800+.
..
于是还是华丽忽略之去了另外一个修车店,结果发现只是螺丝松了...
这些东西不要轻信,大把修车铺,找多几家检查一下再决定...
相关主题
同时修前轮strut和换前轮的LCA bushes,能省labor吗?
求助, 关于刹车
请教高手:关于悬挂系统
大家看看我的车子是什么问题
进入Automobile版参与讨论
i*****t
发帖数: 24265
11
左右晃tie rod'
上下晃bearing
自己youtube考察看看

【在 f**********g 的大作中提到】
: 去做inspection时,工人说前轮松动,还用手左右晃了晃以示证明,说是修理后才能通
: 过inspection。车开着没感觉到跑偏的问题。新手没经验,请高手给个指导。需要修吗
: ?修的话大概多少钱?
: 谢谢。

f**********g
发帖数: 88
12
谢谢。有了结果马上贴上了。

other

【在 D**C 的大作中提到】
: It all depends on what car you got, the cost can be free to very expensive.
: Sometimes on older cars a nut/bolt that secure the tire can stress out and
: break. So check nothing is missing or loose first.
: After that, the wheel bearing could be worn, rack & pinion tie rod or tie
: rod end could be worn, even control arm bearings/bushings could be old.
: Based on your posting so far, you can not tell what is wrong yourself (other
: than check for loose or missing lugs). Ask the shop to give you list of
: item they find wrong and post back the finding here.

f**********g
发帖数: 88
13
好主意啊,谢谢。

【在 e*******l 的大作中提到】
: 所以平时就要固定跟一个稍微靠谱的店建立良好关系,换油换轮胎这种低技术含量的活
: 都照顾一下生意,跟service adviser在first name basis,他就不好意思这么搞了。

f**********g
发帖数: 88
14
这也太黑了吧。

+.

【在 T*********0 的大作中提到】
: 看来这种Tricky的小把戏还是家常便饭啊...
: 上次我去Inspection也是这样,还说是Control Arm坏了,开车很危险,换的话要800+.
: ..
: 于是还是华丽忽略之去了另外一个修车店,结果发现只是螺丝松了...
: 这些东西不要轻信,大把修车铺,找多几家检查一下再决定...

f**********g
发帖数: 88
15
好的,谢谢。

【在 i*****t 的大作中提到】
: 左右晃tie rod'
: 上下晃bearing
: 自己youtube考察看看

e****n
发帖数: 295
16
我真想到了前阵子流行的“八毛门”

+.

【在 T*********0 的大作中提到】
: 看来这种Tricky的小把戏还是家常便饭啊...
: 上次我去Inspection也是这样,还说是Control Arm坏了,开车很危险,换的话要800+.
: ..
: 于是还是华丽忽略之去了另外一个修车店,结果发现只是螺丝松了...
: 这些东西不要轻信,大把修车铺,找多几家检查一下再决定...

f**********g
发帖数: 88
17
又去了两家,最终确定是需要换tie rod end。零件价格差不多,贵就贵在有的说需要
一个小时,有的说需要两个小时。最终选择需要一个小时的,150搞定。
谢谢大家的建议啊,人多力量大。
D**C
发帖数: 331
18
150 for both side tie rod end (including parts) is not bad deal.
Make sure they also do a alignment for you if needed.

【在 f**********g 的大作中提到】
: 又去了两家,最终确定是需要换tie rod end。零件价格差不多,贵就贵在有的说需要
: 一个小时,有的说需要两个小时。最终选择需要一个小时的,150搞定。
: 谢谢大家的建议啊,人多力量大。

f**********g
发帖数: 88
19
不知道有没有调alignment,回去交了钱就开走了,汗。

【在 D**C 的大作中提到】
: 150 for both side tie rod end (including parts) is not bad deal.
: Make sure they also do a alignment for you if needed.

1 (共1页)
进入Automobile版参与讨论
相关主题
bearing的问题
左前轮有声音
·[求助]左前轮异响
请问 前轮轮芯 英文叫什么?
车子到达一定的速度,前轮噪音增大并振动
车子走的时候有沙沙的声音
求助:车右前轮处有摩擦音
谁的耳朵有问题?(求问wheel bearing)
请问换前轮bearings和sway bar links要860
左右轮不一起转
相关话题的讨论汇总
话题: inspection话题: 松动话题: 前轮话题: rod话题: tie