j***j 发帖数: 4878 | |
i********e 发帖数: 1782 | 2 If you buy good parts, parts will cost around $300. Midas will give you
the cheapest parts they can find (<$200 for sure).
You figure out by yourself.
【在 j***j 的大作中提到】 : 760块,贵不贵? : from Midas
|
b**m 发帖数: 1466 | 3 stay away from midas.
unless you are buying a used car... |
j***j 发帖数: 4878 | 4 恩好吧,还是要去找老黑看看先,反正都是用cheap parts,呵呵
【在 i********e 的大作中提到】 : If you buy good parts, parts will cost around $300. Midas will give you : the cheapest parts they can find (<$200 for sure). : You figure out by yourself.
|
i********e 发帖数: 1782 | 5 You can either DIY or find somebody on CL who can provide mobile service.
The most difficult part is to take the rotors off. Sometimes they are
rusted and stuck to the hub. You need the right tool and experience to take
them off. Other things are very easy, piece of cake.
【在 j***j 的大作中提到】 : 恩好吧,还是要去找老黑看看先,反正都是用cheap parts,呵呵
|
x*******u 发帖数: 384 | 6 上个月刚换的rear brake。
自己买了一对rotor,pad,caliper,差不多190刀。
从craigslist找了一个接私活的,labor 50。
约好了一小时搞定。 |
s*******e 发帖数: 1385 | 7 什么车?
【在 j***j 的大作中提到】 : 760块,贵不贵? : from Midas
|
i******t 发帖数: 11048 | 8 好便宜。
【在 x*******u 的大作中提到】 : 上个月刚换的rear brake。 : 自己买了一对rotor,pad,caliper,差不多190刀。 : 从craigslist找了一个接私活的,labor 50。 : 约好了一小时搞定。
|
x*******u 发帖数: 384 | 9 之前去店里inspect过,660刀,太黑了。02年的老车,卖了也就只值3k不到。
考虑自己换,就在网上买了最便宜的part。因为要换caliper,一个人搞不定,就找人
了。
【在 i******t 的大作中提到】 : 好便宜。
|
j***j 发帖数: 4878 | 10 G35
【在 s*******e 的大作中提到】 : 什么车?
|
j***j 发帖数: 4878 | 11 我说的是4个啊,两对
【在 x*******u 的大作中提到】 : 上个月刚换的rear brake。 : 自己买了一对rotor,pad,caliper,差不多190刀。 : 从craigslist找了一个接私活的,labor 50。 : 约好了一小时搞定。
|
x*******u 发帖数: 384 | 12 part多少钱autozone和advancedautoparts都能找到,买多好多贵的,这个看个人需求。
换前后rotor和pad很容易,1-2小时可以干完。乡下的话,100块以内吧。
【在 j***j 的大作中提到】 : 我说的是4个啊,两对
|
s****y 发帖数: 3071 | 13 我一个月前换了4个rotor,4个pad,4个胎一共2k。
你这个很不错了 |