由买买提看人间百态

boards

本页内容为未名空间相应帖子的节选和存档,一周内的贴子最多显示50字,超过一周显示500字 访问原贴
Automobile版 - BMW CANBUS Decoder?
相关主题
那种几十块的HID kit有人用过吗,好用么换个air filter 一般多少钱啊?
想改HID的其实可以买淘宝的全套。。感觉双B车的中流砥柱是(前)第三世界国家人民
实在看不下去了,来说说大灯自己动手$2修好AC compressor
Prius装HID conversion kit(图)subaruonlineparts 10% off coupon
别买HONDA的车!因为它的DRL不能OFF铃木的车很好,为什么销量上不去?
OBD II Code Reader这东西有用不?国产车再过10年确实有可能媲美日系车
车载navigation system能不能自己装19k有可能搞到07 的530吗
给你们看看奔驰最先进的transmission零件开宝马“破墙”
相关话题的讨论汇总
话题: decoder话题: bmw话题: canbus话题: led话题: error
进入Automobile版参与讨论
1 (共1页)
y***n
发帖数: 2318
1
I replaced the halogen DRL bulbs with LED ones and the CANBUS produces the "
bulb out" error.
Tried multiple capacitor based decoders and no luck so far. The closest one
suppresses the error while the car is started and running slow; however as
soon as I step on the gas, the error comes back - make me wonder if it's due
to the variation in the alternator voltage?
Here is the Amazon link:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Anyone on this board has found a working capacitor based decoder for BMW
vehicles?
Thanks in advance.
j******0
发帖数: 1043
2
Don't fuck with cambus. For a light bulb not worth it.
The error is current flow error. Halogen more power more current. The
current flow is a build in parameter in cambus. led less power low current
flow then cambus thinks light bulb is dead. Add an appropriate resister into
led circuit. The LED manufacturer should have the correct current make up
circuit build in. For your case, apparently it is not correct.

"
one
due

【在 y***n 的大作中提到】
: I replaced the halogen DRL bulbs with LED ones and the CANBUS produces the "
: bulb out" error.
: Tried multiple capacitor based decoders and no luck so far. The closest one
: suppresses the error while the car is started and running slow; however as
: soon as I step on the gas, the error comes back - make me wonder if it's due
: to the variation in the alternator voltage?
: Here is the Amazon link:
: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
: Anyone on this board has found a working capacitor based decoder for BMW
: vehicles?

y***n
发帖数: 2318
3
Frankly your post has no valuable information.
My plan is simple - either find a working capacitor; or code the car
computer to bypass the bulb check for the DRL.

into

【在 j******0 的大作中提到】
: Don't fuck with cambus. For a light bulb not worth it.
: The error is current flow error. Halogen more power more current. The
: current flow is a build in parameter in cambus. led less power low current
: flow then cambus thinks light bulb is dead. Add an appropriate resister into
: led circuit. The LED manufacturer should have the correct current make up
: circuit build in. For your case, apparently it is not correct.
:
: "
: one
: due

j******0
发帖数: 1043
4
neither plan is simple.
谁知道你的LED是哪家山寨企业生产的。
自身阻抗多少?通用件还是BMW专用件?如果后者,就自带欺骗线路了。那么就是这个
欺骗线路做的不对,要再改更麻烦。得加个可变电容或电阻自己调。
cambus 手持decoder,谁知到是否code全?你试下才知道。
这里是菜车论坛,到bimmerfest去看看。
我是用inpa 刷的,2008版软件 找台WinXP电脑才能用。E66 七系前四年的乘客座带按
摩,按摩一启动乘客座的气囊就报警。得把气囊disable掉。搞了很久。你有能力就
inpa刷,还便宜。

【在 y***n 的大作中提到】
: Frankly your post has no valuable information.
: My plan is simple - either find a working capacitor; or code the car
: computer to bypass the bulb check for the DRL.
:
: into

d*******3
发帖数: 6550
5
重新买带电阻的led bulb,可以解决问题。否则要用软件把warning给消掉,那个比较
麻烦, 要买usb to obd2的线,还要装NSC Expert等等,还是重新买灯泡简单
E****a
发帖数: 3088
6
换车吧
n***s
发帖数: 10056
7
Page not found.

"
one
due

【在 y***n 的大作中提到】
: I replaced the halogen DRL bulbs with LED ones and the CANBUS produces the "
: bulb out" error.
: Tried multiple capacitor based decoders and no luck so far. The closest one
: suppresses the error while the car is started and running slow; however as
: soon as I step on the gas, the error comes back - make me wonder if it's due
: to the variation in the alternator voltage?
: Here is the Amazon link:
: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
: Anyone on this board has found a working capacitor based decoder for BMW
: vehicles?

y***n
发帖数: 2318
8
All-in-one的LED灯泡首先塞不进E63狭小封闭的灯室,而且这种灯泡4000 lumen起步,
发热量很大,在封闭的灯室里不安全。电阻decoder,要大量发热,电容类的decoder发
热很小,但试了好几家的产品都不能清除error message。
估计NCS Expert是唯一可行方案。

neither plan is simple.

【在 j******0 的大作中提到】
: neither plan is simple.
: 谁知道你的LED是哪家山寨企业生产的。
: 自身阻抗多少?通用件还是BMW专用件?如果后者,就自带欺骗线路了。那么就是这个
: 欺骗线路做的不对,要再改更麻烦。得加个可变电容或电阻自己调。
: cambus 手持decoder,谁知到是否code全?你试下才知道。
: 这里是菜车论坛,到bimmerfest去看看。
: 我是用inpa 刷的,2008版软件 找台WinXP电脑才能用。E66 七系前四年的乘客座带按
: 摩,按摩一启动乘客座的气囊就报警。得把气囊disable掉。搞了很久。你有能力就
: inpa刷,还便宜。

y***n
发帖数: 2318
9
对于理工男,用NCS Expert不会是问题;网上很多人说这个工具"super easy"。

【在 d*******3 的大作中提到】
: 重新买带电阻的led bulb,可以解决问题。否则要用软件把warning给消掉,那个比较
: 麻烦, 要买usb to obd2的线,还要装NSC Expert等等,还是重新买灯泡简单

y***n
发帖数: 2318
10
昨天花了点时间搞定了NCSExpert,取消了DRL的cold and hot monitoring;顺带把讨厌
无比的legal disclaimer一并取消,又加了console的数字速度显示。
好像还有无数可以玩的设定,以后有空再弄吧。

"
one
due

【在 y***n 的大作中提到】
: I replaced the halogen DRL bulbs with LED ones and the CANBUS produces the "
: bulb out" error.
: Tried multiple capacitor based decoders and no luck so far. The closest one
: suppresses the error while the car is started and running slow; however as
: soon as I step on the gas, the error comes back - make me wonder if it's due
: to the variation in the alternator voltage?
: Here is the Amazon link:
: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
: Anyone on this board has found a working capacitor based decoder for BMW
: vehicles?

j******0
发帖数: 1043
11
中控开机显示改掉,加些中文字,比如, “主人,。。。”

【在 y***n 的大作中提到】
: 昨天花了点时间搞定了NCSExpert,取消了DRL的cold and hot monitoring;顺带把讨厌
: 无比的legal disclaimer一并取消,又加了console的数字速度显示。
: 好像还有无数可以玩的设定,以后有空再弄吧。
:
: "
: one
: due

1 (共1页)
进入Automobile版参与讨论
相关主题
开宝马“破墙”别买HONDA的车!因为它的DRL不能OFF
宝马车主任性,ramp上停车只为体验0-60OBD II Code Reader这东西有用不?
给迷信德车sensor的说个事情车载navigation system能不能自己装
BMW现在唯一的好车就是新750i给你们看看奔驰最先进的transmission零件
那种几十块的HID kit有人用过吗,好用么换个air filter 一般多少钱啊?
想改HID的其实可以买淘宝的全套。。感觉双B车的中流砥柱是(前)第三世界国家人民
实在看不下去了,来说说大灯自己动手$2修好AC compressor
Prius装HID conversion kit(图)subaruonlineparts 10% off coupon
相关话题的讨论汇总
话题: decoder话题: bmw话题: canbus话题: led话题: error