W***n
发帖数: 11530 | 1 Most Common Honda Odyssey Problems
Electric Sliding Door Issues
There have been some issues reported with the electric sliding doors. Our
technicians remind us that proper diagnoses will be necessary to determine
the cause of various faults which may occur.
Vibration When Braking Due to Rotor Problem:
A brake pedal that pulsates under the foot while braking the vehicle has
been noted by many owners of the Honda Odyssey. This issue spans many years,
and multiple generations of the well-known minivan, and Honda has taken
measures to correct concerns.
The front brake rotors are the cause of the break pulsation, and are subject
to a condition known as lateral run-out, or simply called warped brake
rotors.
As the brakes are used, heat builds quickly in the brake rotors and brake
pads, as a normal byproduct of friction. This heat can become too great for
the original rotors, and cause the metal to warp over time.
Once the rotor begins to warp, the warping process accelerates due to uneven
heating of the brake rotor, and the issue will quickly turn from light
pulsing of the pedal to full-vehicle vibration.
Revised brake rotors have been released by Honda, and will correct the
concern. The brake pads will need to be changed at the same time.
Note: this error has been known as early as 20,000 miles.
Check Engine and D4 Lights Flashing:
The Honda Odyssey may develop issues with the automatic transmission.
Rough shifting may occur, and the “D4” light and check engine may begin to
blink. The check engine light will also illuminate, and OBD trouble codes
P0700, P0730, P0740, P0780, P1768 and/or P1768 will be stored in the
computer.
If the transmission shifts roughly, the failure is very likely mechanical
failure of the transmission. If the transmission performs normally, a faulty
sensor, or dirty transmission fluid may be the case.
In most cases, it is necessary to use professional diagnostic equipment to
provide a diagnosis, and complete the repair.
The longevity of the transmission is dependent on strict adherence to the
manufacturer's recommendation for ATF replacement intervals and procedure. |
|
