b*******e
发帖数: 724 | 1
1. You need a transmission jack to hold and remove the tranny!
2. Alignment tool is not that expensive($10 or so) but not easy to do it
right.
3. Flywheel resurfacing needs to be done at a professional machine shop(2
days).
4. Most cars Chinese drive are FWD Japanese cars, all of the messy stuff are
stacked on top of the front axle. Such as the engine, tranny, starter.
steering column
etc. Many parts need to be removed in order to access
the tranny area, because when the engineers design the c |
|
