f*****y 发帖数: 142 | 1 I will use bolt to describe the thread. nuts are much easier and simpler
since they just match on bolt.
first, the thread pitch. metric uses milimeters, such as 1.0mm, 1.25mm.
fundamental property of thread. SAE uses fractional inch, such as 1/8,
5/16, etc.
second, the same pitch could have different diameter. the common sizes are
6x1.0mm, 8x1.25mm, 10x1.25mm, 12x1.5mm. the diameter refer to internal
size. add 4-6 for the size in socket. eg...6x1.0mm in most cases,
corresponds to 10mm small bolt |
|