f*******1
发帖数: 29 | 1 一朋友想购买一个上线的机器。
预算400以下，希望有经验者推荐下下
谢 过！！ |
b*****t
发帖数: 3928 | 2 不少人买这个牌子的
http://eagnas.com/badmint.html#ST250
$400应该可以买的比较好的。如果比较认真的话，一定要六点支撑。两点支撑的不能上
高磅。
【在 f*******1 的大作中提到】
: 一朋友想购买一个上线的机器。
: 预算400以下，希望有经验者推荐下下
: 谢 过！！
|
b*****t
发帖数: 3928 | 3 不少人买这个牌子的
http://eagnas.com/badmint.html#ST250
$400应该可以买的比较好的。如果比较认真的话，一定要六点支撑。两点支撑的不能上
高磅。
【在 f*******1 的大作中提到】
: 一朋友想购买一个上线的机器。
: 预算400以下，希望有经验者推荐下下
: 谢 过！！
|
x*z
发帖数: 694 | 4 强烈不推荐这个牌子，
以前买过两次，质量，做工都很差，
唯一的好处是便宜，
推荐gamma的穿线机，很不错
，建议楼主去badmintoncentral.com的谈穿线的版上看看比较什么的
【在 b*****t 的大作中提到】
: 不少人买这个牌子的
: http://eagnas.com/badmint.html#ST250
: $400应该可以买的比较好的。如果比较认真的话，一定要六点支撑。两点支撑的不能上
: 高磅。
|
S**n
发帖数: 486 | 5 I have a old Eagnas badminton stringer, and want to sell it to anyone who
want to buy and use it as a start up/beginnger machine. The only problem is
that, it'll need a stand because I am using the stand for my current
stringer. I currently using Eagnas ST-250 and its great!!!
http://eagnas.com/st250.html
【在 f*******1 的大作中提到】
: 一朋友想购买一个上线的机器。
: 预算400以下，希望有经验者推荐下下
: 谢 过！！
|
b*****t
发帖数: 3928 | 6 听说Eagnas ST250是Yonex ＯＥＭ
is
【在 S**n 的大作中提到】
: I have a old Eagnas badminton stringer, and want to sell it to anyone who
: want to buy and use it as a start up/beginnger machine. The only problem is
: that, it'll need a stand because I am using the stand for my current
: stringer. I currently using Eagnas ST-250 and its great!!!
: http://eagnas.com/st250.html
|
S**n
发帖数: 486 | 7 I got my ST250 from Eagnas warehouse in LA. I talked to the owner and he
said Yonex are using their machines, but just repaint it and rename it as
Yonex and sell it almost double of the price listed as Eagnas.
【在 b*****t 的大作中提到】
: 听说Eagnas ST250是Yonex ＯＥＭ
:
: is
|
o********s
发帖数: 971 | 8 i dislike the floating clamps... |
b*****t
发帖数: 3928 | 9 Fixed clamp machine is too expensive unless you want to make money.
【在 o********s 的大作中提到】
: i dislike the floating clamps...
|
o********s
发帖数: 971 | 10 would this one be better? it has one fixed clamp
http://eagnas.com/easy3.html |
|
|
b*****t
发帖数: 3928 | 11 You still need one more flying clamp.
【在 o********s 的大作中提到】
: would this one be better? it has one fixed clamp
: http://eagnas.com/easy3.html
|
o********s
发帖数: 971 | 12 agreed. but, better than need 2 flying clamps, right?
【在 b*****t 的大作中提到】
: You still need one more flying clamp.
|
b*****t
发帖数: 3928 | 13 I cann't figure it out how one fix clamp work. There are some discussion on
badmintoncentral. To me, only one fix clamp may be more headache than help.
【在 o********s 的大作中提到】
: agreed. but, better than need 2 flying clamps, right?
|
f*******1
发帖数: 29 | |
o********s
发帖数: 971 | 15 good point. i don't know how it works either. maybe you have to finish one
side before staring the other side. but, that might cause unbalanced prob.
it should have a solution. anybody knows?
on
【在 b*****t 的大作中提到】
: I cann't figure it out how one fix clamp work. There are some discussion on
: badmintoncentral. To me, only one fix clamp may be more headache than help.
|
S**n
发帖数: 486 | 16 For me, I string the 2 points way, so I usually only need one clamp. I only
use the fly clamp, I hate the fixed clamps, because sometime it doesn't go
to the places that I wanted to be. Fly clamps give you more freedom of where
to place them at. The only time I uses 2 fly clamps is when I finished the
last vertical lines and stringing the first horizontal lines.
【在 o********s 的大作中提到】
: agreed. but, better than need 2 flying clamps, right?
|
x*z
发帖数: 694 | 17 这个固定架子不太好用，应该是给网球线的，
试试别的牌子的机器吧
【在 o********s 的大作中提到】
: would this one be better? it has one fixed clamp
: http://eagnas.com/easy3.html
|
x*z
发帖数: 694 | 18 是啊，两点打结就可以只用一个架子，
用熟了，还试固定的架子方便，还有
一次只夹一根线，所以穿完之后，线和线之间比较平行，不像飞夹那样
东倒西歪
四点打结，竖线最后几根比较好固定
only
where
the
【在 S**n 的大作中提到】
: For me, I string the 2 points way, so I usually only need one clamp. I only
: use the fly clamp, I hate the fixed clamps, because sometime it doesn't go
: to the places that I wanted to be. Fly clamps give you more freedom of where
: to place them at. The only time I uses 2 fly clamps is when I finished the
: last vertical lines and stringing the first horizontal lines.
|
