t******k 发帖数: 599 | 1 看到很多protocol里面sonication,离心以后都要把supernatant用dilution buffer稀
释,然后分装n管子。因为我的样品本来就不多,所以没有dilution,直接拿去做ip,
这样会有问题吗? |
k*****n 发帖数: 323 | |
t******k 发帖数: 599 | 3
其实吧我一直不知道这一步是干啥用的,难道就是为了稀释增加体积,然后多做几个ip
么。。。
【在 k*****n 的大作中提到】 : 没问题的
|
y*********1 发帖数: 46 | 4 Some protocols use 1% SDS in the sonication buffer, which might interfere
with IP. Dilution usually brings down the SDS concentration to 0.1%. |
t******k 发帖数: 599 | 5 这样啊。。那我以后还是稀释一下比较好吧
【在 y*********1 的大作中提到】 : Some protocols use 1% SDS in the sonication buffer, which might interfere : with IP. Dilution usually brings down the SDS concentration to 0.1%.
|
a****o 发帖数: 1786 | 6 correct
【在 y*********1 的大作中提到】 : Some protocols use 1% SDS in the sonication buffer, which might interfere : with IP. Dilution usually brings down the SDS concentration to 0.1%.
|