t***o 发帖数: 1353 | |
I******e 发帖数: 101 | 2 Windows should be the easiest one. Oracle has free downloads. |
t***o 发帖数: 1353 | 3 http://www.downloaddatabase.com/databasesoftware/download-oracle-9i-database.htm
麻烦您老问一下,比如我上面给的这个链接里的,都是合法的免费下载吗?
【在 I******e 的大作中提到】 : Windows should be the easiest one. Oracle has free downloads.
|
I******e 发帖数: 101 | 4 Yes, for learning or evaluation. But you can not use it to power your
backend for commercial use or similar. |
B*****g 发帖数: 34098 | 5 http://www.oracle.com/technology/software/products/database/index.html
just register, it is free.
why you need 9i? Download 10 or 11
Remember 1 thing: don't download client release.
【在 t***o 的大作中提到】 : http://www.downloaddatabase.com/databasesoftware/download-oracle-9i-database.htm : 麻烦您老问一下,比如我上面给的这个链接里的,都是合法的免费下载吗?
|
j*****n 发帖数: 1781 | 6 en, one lesson I learn from Oracle, check its sys requirements and get a
power PC first. hehe |
s****y 发帖数: 983 | 7 if you are familiar with linux, rhel4 is the best. |
B*****g 发帖数: 34098 | 8 is it free?
【在 s****y 的大作中提到】 : if you are familiar with linux, rhel4 is the best.
|
N**********d 发帖数: 9292 | 9 no
【在 B*****g 的大作中提到】 : is it free?
|
B*****g 发帖数: 34098 | 10 这些奸商, NND. 学啥不好学M$
【在 N**********d 的大作中提到】 : no
|
|
|
y********o 发帖数: 2565 | 11
Ha, same here. My PC has only 1G, and Oracle SGA/PGA will take at least
about 400M. I think one needs a minimum of 2G memory plus a strong CPU to
comfortably run Oracle. I had to stop all Oracle services on my windows box.
【在 j*****n 的大作中提到】 : en, one lesson I learn from Oracle, check its sys requirements and get a : power PC first. hehe
|
s****y 发帖数: 983 | 12 I think you can get it for free somewhere.
【在 B*****g 的大作中提到】 : 这些奸商, NND. 学啥不好学M$
|
s****d 发帖数: 338 | 13 实在是无语了,1G的机器上网都嫌慢还能干啥别的? 你到walmart看看,六七百刀的家
用小白电脑都是3G的标配,呵呵。。。
其实自己用的话最方便的就是到OTN.oracle.com下载一个10g XE (精简版本),几分
钟就可以装好,也不会占太多资源。 不过XE好象只能装到windows上。。。
box.
【在 y********o 的大作中提到】 : : Ha, same here. My PC has only 1G, and Oracle SGA/PGA will take at least : about 400M. I think one needs a minimum of 2G memory plus a strong CPU to : comfortably run Oracle. I had to stop all Oracle services on my windows box.
|
n********6 发帖数: 1511 | 14 如果安装在windows上面,过程中请先在windows上安装loop back adapter。那是一个
虚拟网卡,给你的机器一个固定的ip地址。google一下就知道了。
原因:因为oracle绑定机器的ip地址到数据库里面。如果你第二次开机自己的IP地址变
了,oracle就没法工作了。而且,oracle还没法完全uninstall。
个人经历:我安装过oracle10.0.0.2(大概这个版本,oracle网站下的,用来学习),
home, 绑定IP,不能完全卸载。自己电脑动态IP,第二次无法工作。后来格式化硬盘,
完全重装才行。
如果有人知道更好地解决办法,请介绍一下。 |
i***c 发帖数: 301 | 15 装到vmware里,死了删掉
【在 n********6 的大作中提到】 : 如果安装在windows上面,过程中请先在windows上安装loop back adapter。那是一个 : 虚拟网卡,给你的机器一个固定的ip地址。google一下就知道了。 : 原因:因为oracle绑定机器的ip地址到数据库里面。如果你第二次开机自己的IP地址变 : 了,oracle就没法工作了。而且,oracle还没法完全uninstall。 : 个人经历:我安装过oracle10.0.0.2(大概这个版本,oracle网站下的,用来学习), : home, 绑定IP,不能完全卸载。自己电脑动态IP,第二次无法工作。后来格式化硬盘, : 完全重装才行。 : 如果有人知道更好地解决办法,请介绍一下。
|
B*****g 发帖数: 34098 | 16 我好像就是不装Network service
【在 n********6 的大作中提到】 : 如果安装在windows上面,过程中请先在windows上安装loop back adapter。那是一个 : 虚拟网卡,给你的机器一个固定的ip地址。google一下就知道了。 : 原因:因为oracle绑定机器的ip地址到数据库里面。如果你第二次开机自己的IP地址变 : 了,oracle就没法工作了。而且,oracle还没法完全uninstall。 : 个人经历:我安装过oracle10.0.0.2(大概这个版本,oracle网站下的,用来学习), : home, 绑定IP,不能完全卸载。自己电脑动态IP,第二次无法工作。后来格式化硬盘, : 完全重装才行。 : 如果有人知道更好地解决办法,请介绍一下。
|
n********6 发帖数: 1511 | 17 你是装的oracle home吗?
是不是windows?
你的电脑是不是有固定的ip?
你看看oracle的文件夹底下有没有包含了ip的文件夹名字?
【在 B*****g 的大作中提到】 : 我好像就是不装Network service
|
k******4 发帖数: 19 | |
t*********i 发帖数: 217 | 19 any download from www.oracle.com is free, as long as you just use it to
learn.
download a windows version oracle, install a loopback adapter (google it,
very easy); then unzip the download, click setup, you will be there. Don't
forget to configure network files afterwords.
That's it. You will have a working oracle DB |
n********6 发帖数: 1511 | 20 beijing does not need the loopback adapter for oracle on windows. Do you
know
how it works?
【在 t*********i 的大作中提到】 : any download from www.oracle.com is free, as long as you just use it to : learn. : download a windows version oracle, install a loopback adapter (google it, : very easy); then unzip the download, click setup, you will be there. Don't : forget to configure network files afterwords. : That's it. You will have a working oracle DB
|
|
|
t*********i 发帖数: 217 | 21 just download one and try to install. The install process will promp you to
install the loopback adapter if it thinks your system needs one; otherwise,
it will let you pass |
B*****g 发帖数: 34098 | 22 co-ask
【在 n********6 的大作中提到】 : beijing does not need the loopback adapter for oracle on windows. Do you : know : how it works?
|
t*********i 发帖数: 217 | |
i**p 发帖数: 902 | 24 I got confused to set IP. In the Local Area Connection Propertise window (
control panel -> Network and Dialup Connections -> Local Area Connection),
there are upper and lower field. The upper field is Microsoft Loopback
Adapter. Click "Config" -> Advanced -> Network Address, then you can write a
IP there. But it seems this is not the IP used for this adapter. Its IP is
set by lower field "Internet Protocol(TCP/IP)-> properties. Then what is the
purpose to set IP in upper field?
【在 n********6 的大作中提到】 : 如果安装在windows上面,过程中请先在windows上安装loop back adapter。那是一个 : 虚拟网卡,给你的机器一个固定的ip地址。google一下就知道了。 : 原因:因为oracle绑定机器的ip地址到数据库里面。如果你第二次开机自己的IP地址变 : 了,oracle就没法工作了。而且,oracle还没法完全uninstall。 : 个人经历:我安装过oracle10.0.0.2(大概这个版本,oracle网站下的,用来学习), : home, 绑定IP,不能完全卸载。自己电脑动态IP,第二次无法工作。后来格式化硬盘, : 完全重装才行。 : 如果有人知道更好地解决办法,请介绍一下。
|
n********6 发帖数: 1511 | 25 我当时只是
network connection - >
right click loopback adapter - >
properties - >
general (tab) - >
internet protocal (TCP/IP) - >
properties - >
manual input 192。168。1。100.(也可能是10。1。1。2。我记不住了。我也记不住是
否设mask, gateway, DNS了)
我不知道你所指的IP in upper field。
a
is
the
【在 i**p 的大作中提到】 : I got confused to set IP. In the Local Area Connection Propertise window ( : control panel -> Network and Dialup Connections -> Local Area Connection), : there are upper and lower field. The upper field is Microsoft Loopback : Adapter. Click "Config" -> Advanced -> Network Address, then you can write a : IP there. But it seems this is not the IP used for this adapter. Its IP is : set by lower field "Internet Protocol(TCP/IP)-> properties. Then what is the : purpose to set IP in upper field?
|