P******a
发帖数: 121 | 1 大侠们，
最近老板要买电磁仿真的软件，现在有ANSOFT的HFSS（实际买的是低频的版本MAXWELL
）和CST的MICROWAVE STUDIO。我从来没用过这两种软件，大家能不能推荐一下啊。最
近的工作主要是做TRANSFORMER, INDUCTOR的仿真。多谢多谢。。。 |
P******a
发帖数: 121 | |
l*****z
发帖数: 2305 | |
d*******6
发帖数: 14 | |
b*****g
发帖数: 2727 | 5 好几年前刚用HFSS时还没卖给ANSOFT，AGILENT那个老版本用起来麻烦。后来新的很花
哨都不会用了。CST MWS不错，时域信息很有帮助，不过我主要是做波导结构。还用它
的祖宗CST MAFIA,这个简直不稳定得要死，不过作粒子仿真还是离不开。 |
e*l
发帖数: 60 | 6 AGILENT的HFSS是ANSOFT做的，挂了个牌子。所以后来闹翻了就没有AGILENT的了。 |
b********6
发帖数: 16 | |
b***e
发帖数: 38 | 8 HFSS sells you fancy staff that you may never need. |
w****j
发帖数: 237 | 9 The Maxwell 3D is good for transformer design, and it is not a part of HFSS~
~ By the way, I heard that Ansoft has gone, it was acquired by Ansys. |
P******a
发帖数: 121 | 10 Thanks. But are their GUI basically the same?
HFSS~
【在 w****j 的大作中提到】
: The Maxwell 3D is good for transformer design, and it is not a part of HFSS~
: ~ By the way, I heard that Ansoft has gone, it was acquired by Ansys.
|
w****j
发帖数: 237 | 11 GUI of these two are very similar, I thought. Easy to use and quick learning
curve~ |
P******a
发帖数: 121 | |
