s*******y 发帖数: 4173 | 1 现在用ocean做transient仿真,
时间短没有问题,可以输出 信号的文件,
但run长时间的,临时文件有10 GBytes, 但
显示仿真正常结束,但写输出文件的时候
报错,说 no valid output signal.
有没有人遇到类似问题,如何解决的。谢谢! | ET 发帖数: 10701 | 2 cadence的bug吧。
更他们技术支持的反映下。
不过你这10gb的数据文件,能找到你想要的也挺难。
【在 s*******y 的大作中提到】 : 现在用ocean做transient仿真, : 时间短没有问题,可以输出 信号的文件, : 但run长时间的,临时文件有10 GBytes, 但 : 显示仿真正常结束,但写输出文件的时候 : 报错,说 no valid output signal. : 有没有人遇到类似问题,如何解决的。谢谢!
| a*m 发帖数: 6253 | 3 no,i dont think your sim is finished successfully cause no scratch for data R/W.
The way to improve this is to save less data, saying, only save selected
signal, or save 1 data per 10 point if you have high speed clock/toggling
signal. of coz, if you can get more disk space, that is perfect. | s*******y 发帖数: 4173 | 4 我后来发现可能是因为我用一天机器做仿真,在另外一台调电路,
可能后者影响前面的仿真了。
不过啥叫 SAVE LESS DATA,我跑长时间的transient仿真,然后
把一些输出信号写到文件里面,没有地方设置 save data.我
也一直想能减少一些仿真文件的大小。
data R/W.
【在 a*m 的大作中提到】 : no,i dont think your sim is finished successfully cause no scratch for data R/W. : The way to improve this is to save less data, saying, only save selected : signal, or save 1 data per 10 point if you have high speed clock/toggling : signal. of coz, if you can get more disk space, that is perfect.
|
|