w****j 发帖数: 237 | 1 RT,
比如TI的TSSOP14和National semiconductor的TSSOP14,看图的dimension差不多,那么
PCB上的land pattern是不是就可以互用了?
另外,有没有什么PCB的viewer可以看cadence allegro或者mentor graphics的PADS的
软件?好像TI网站上就提供这两个软件的footprint land pattern | g******u 发帖数: 3060 | 2 对,是可以通用。
【在 w****j 的大作中提到】 : RT, : 比如TI的TSSOP14和National semiconductor的TSSOP14,看图的dimension差不多,那么 : PCB上的land pattern是不是就可以互用了? : 另外,有没有什么PCB的viewer可以看cadence allegro或者mentor graphics的PADS的 : 软件?好像TI网站上就提供这两个软件的footprint land pattern
| w****j 发帖数: 237 | 3 发现MAXIM的TSSOP24的recommended land pattern 的pitch是0.66mm(0.026")。但是
package引脚pitch是0.65mm,图例上写以mm为controlling dimension,但是对应的英制
是0.026"(0.66mm)。
到底应该采用那个了,记得好像TSSOP的pitch都是0.65mm阿?老美这里的英制和公制混
用就是麻烦. |
|