x*7 发帖数: 11281 | 1 昨天自己配了,结果分层,最下面貌似是水相。
另外,加了羊毛脂,不溶解。
怎么办? |
g****r 发帖数: 1607 | 2 我靠,你现在折腾的东西我都没听说过了,你太能搞了 |
k**********i 发帖数: 8706 | |
x*7 发帖数: 11281 | 4 就是想省俩钱
http://www.surplusrifle.com/reviews/edred/index.asp
拿这个擦枪,你那个啊卡七十四的制退器可以直接泡
【在 g****r 的大作中提到】 : 我靠,你现在折腾的东西我都没听说过了,你太能搞了
|
x*7 发帖数: 11281 | 5 嗯,都是在室外搞
相分离有解释吗?
【在 k**********i 的大作中提到】 : 注意通风,气体有毒
|
k**********i 发帖数: 8706 | 6 貌似混合溶液是要一定的顺序才行的
This formula is based on proven principles and incorporates two polar
and two nonpolar solvents.
不知道你用的是哪个guide?
http://www.handloads.com/articles/default.asp?id=9
【在 x*7 的大作中提到】 : 嗯,都是在室外搞 : 相分离有解释吗?
|
x*7 发帖数: 11281 | 7 我参考这个
http://www.frfrogspad.com/homemade.htm
好像其他几个也是互相C/P,句子都是一样的
Add the ATF first. Use the empty container to measure the other
components, so that it is thoroughly rinsed.
只是说ATF黏糊糊的,所以先量,然后用其他溶剂冲
这个也就是我们说的定量转移而已。
后面羊毛脂,我偷懒了,没有融化直接放进去
【在 k**********i 的大作中提到】 : 貌似混合溶液是要一定的顺序才行的 : This formula is based on proven principles and incorporates two polar : and two nonpolar solvents. : 不知道你用的是哪个guide? : http://www.handloads.com/articles/default.asp?id=9
|