j*********r
发帖数: 24733 | 1 发文标题(请简明描述技术):
How to get full-speed with RT-N16?
请选择话题(原创,转贴,建议或讨论等)::
讨论
请尽量详细描述技术内容:
Flashed N16 with Tomato and set up the wireless as N only and WPA2-AES. But
the channel is always 20MHz and the top speed is 144Mbps (11) after I tried
all channels. All my clients have T2R2 which should support 300Mbps and
40MHz. Can anybody share the best settings? And I have my WRT54GV4 (DD-WRT)
configed as a bridge and wired with N16 to broadcast G signals. 1 laptop
works well with Win7-64 but another (XP |
j*********r
发帖数: 24733 | 2 Nobody knows? Thanks a lot.
请尽量详细描述技术内容:
Flashed N16 with Tomato and set up the wireless as N only and WPA2-AES. But the channel is always 20MHz and the top speed is 144Mbps (11) after I tried all channels. All my clients have T2R2 which should support 300Mbps and 40MHz. Can anybody share the best settings? And I have my WRT54GV4 (DD-WRT) configed as a bridge and wired with N16 to broadcast G signals. 1 laptopworks well with Win7-64 but another (XP) can not connect. Already updated firmware (Br
【在 j*********r 的大作中提到】
: 发文标题(请简明描述技术):
: How to get full-speed with RT-N16?
: 请选择话题(原创,转贴,建议或讨论等)::
: 讨论
: 请尽量详细描述技术内容:
: Flashed N16 with Tomato and set up the wireless as N only and WPA2-AES. But
: the channel is always 20MHz and the top speed is 144Mbps (11) after I tried
: all channels. All my clients have T2R2 which should support 300Mbps and
: 40MHz. Can anybody share the best settings? And I have my WRT54GV4 (DD-WRT)
: configed as a bridge and wired with N16 to broadcast G signals. 1 laptop
|
p**i
发帖数: 688 | 3 router和client上应该有个地方设Channel Width的, 试试force设成40MHz
But
tried
)
I
【在 j*********r 的大作中提到】
: 发文标题(请简明描述技术):
: How to get full-speed with RT-N16?
: 请选择话题(原创,转贴,建议或讨论等)::
: 讨论
: 请尽量详细描述技术内容:
: Flashed N16 with Tomato and set up the wireless as N only and WPA2-AES. But
: the channel is always 20MHz and the top speed is 144Mbps (11) after I tried
: all channels. All my clients have T2R2 which should support 300Mbps and
: 40MHz. Can anybody share the best settings? And I have my WRT54GV4 (DD-WRT)
: configed as a bridge and wired with N16 to broadcast G signals. 1 laptop
|
j*********r
发帖数: 24733 | 4 I did of course, I force it to 40MHz, it actually only shows 20.
【在 p**i 的大作中提到】
: router和client上应该有个地方设Channel Width的, 试试force设成40MHz
:
: But
: tried
: )
: I
|
j*********r
发帖数: 24733 | 5 OK, spent a whole night and figured out beta-16 has problem. Downgraded to
beta-11 and it is fine. The 2nd problem is still there though. Thanks a lot.
But
tried
)
【在 j*********r 的大作中提到】
: 发文标题(请简明描述技术):
: How to get full-speed with RT-N16?
: 请选择话题(原创,转贴,建议或讨论等)::
: 讨论
: 请尽量详细描述技术内容:
: Flashed N16 with Tomato and set up the wireless as N only and WPA2-AES. But
: the channel is always 20MHz and the top speed is 144Mbps (11) after I tried
: all channels. All my clients have T2R2 which should support 300Mbps and
: 40MHz. Can anybody share the best settings? And I have my WRT54GV4 (DD-WRT)
: configed as a bridge and wired with N16 to broadcast G signals. 1 laptop
|
