x**y 发帖数: 1086 | 1 请问有人成功装上asterisk么?
我刷的dd-wrt,昨天试了一晚上也不行
难道非得用openwrt才行么 |
e*i 发帖数: 10288 | 2 1 install optware.
2 install asterisk (remove the old verison, then install)
3 setup
【在 x**y 的大作中提到】 : 请问有人成功装上asterisk么? : 我刷的dd-wrt,昨天试了一晚上也不行 : 难道非得用openwrt才行么
|
x**y 发帖数: 1086 | 3 我也是按照这个步骤来的,可是*启动不了,不知道为什么
麻烦看一下,是不是这几步?
1. http://www.dd-wrt.com/phpBB2/viewtopic.php?t=86912
2. http://supermario-world.blogspot.com/2010/11/asterisk-18-and-native-google-voice.html
以前没有装过,就不用卸载了吧?
3. 按照我以前在dockstar上的config
不知道那一步出的问题
另外,不知道你用的是哪个版本的dd-wrt,我用的是17201
【在 e*i 的大作中提到】 : 1 install optware. : 2 install asterisk (remove the old verison, then install) : 3 setup
|
e*i 发帖数: 10288 | 4 did you have * installed? if it is installed, try to start it
manually and see if it works. if it works, then try to change
some files in /opt/etc or something like that.
I installed it on asus wl-500gp v2. build 14896.
【在 x**y 的大作中提到】 : 我也是按照这个步骤来的,可是*启动不了,不知道为什么 : 麻烦看一下,是不是这几步? : 1. http://www.dd-wrt.com/phpBB2/viewtopic.php?t=86912 : 2. http://supermario-world.blogspot.com/2010/11/asterisk-18-and-native-google-voice.html : 以前没有装过,就不用卸载了吧? : 3. 按照我以前在dockstar上的config : 不知道那一步出的问题 : 另外,不知道你用的是哪个版本的dd-wrt,我用的是17201
|
x**y 发帖数: 1086 | 5 It's kind of different with your router that is with braodcom chips.I could
get the optware working, but no luck with *, seems something are missing or
incompatible with either the atheros chips or optware or ddwrt. Anyone can
help??
【在 e*i 的大作中提到】 : did you have * installed? if it is installed, try to start it : manually and see if it works. if it works, then try to change : some files in /opt/etc or something like that. : I installed it on asus wl-500gp v2. build 14896.
|
a****x 发帖数: 231 | |
x**y 发帖数: 1086 | 7 请问一下你是自己编译的,还是用的现成的啊
自己make貌似挺麻烦的样子
【在 a****x 的大作中提到】 : 上OpenWRT吧,一直很好用
|
a****x 发帖数: 231 | 8 现成的就行,这里有详细的说明
http://wiki.openwrt.org/toh/netgear/wndr3700
装完openwrt.运行
opkg update
opkg install asterisk18
配置一下asterisk。 |
x**y 发帖数: 1086 | 9 多谢
你的openwrt的具体配置方便贴一下吗?
对非图形界面还是有点头大
【在 a****x 的大作中提到】 : 现成的就行,这里有详细的说明 : http://wiki.openwrt.org/toh/netgear/wndr3700 : 装完openwrt.运行 : opkg update : opkg install asterisk18 : 配置一下asterisk。
|
a****x 发帖数: 231 | 10 改一个文件,就可以通过router上网了。我用Comcast DHCP。DSL可能稍微麻烦一
些。
telnet 1921.168.1.1
进去后修改密码:
passwd
然后修改文件network
vi /etc/config/network
config 'interface' 'wan'
option 'ifname' 'eth1'
option 'proto' 'dhcp'<====
option 'macaddr' 'xx:xx:xx:xx:xx:x'<====Comcast 注册macaddr |
a****x 发帖数: 231 | 11 然后就可以用browser连接到http://192.168.1.1使用图形界面修改其他设置,安装package,也可以SSH到192.168.1.1操作。 |
x**y 发帖数: 1086 | 12 多谢,你的wireless怎么设置的啊
为什么我无论怎么弄,信号强度都满不了,尤其是2.4g的,经常只有80多m的速度
5g的好一些,但也到不了300m
据说是不是这些系统都不如原厂系统的信号好啊?
而且经常重启之后wireless就不见了
呵呵,比ddwrt高深多了 |