n******l
发帖数: 3427 | 1 按照这个link的介绍安装的
http://archlinuxarm.org/platforms/armv6/pogoplug-provideov3
执行到14步骤的时候reboot，然后就出现如下的描述
If your Pogoplug boots and the front LED blinks wildly for about 15-20
seconds and then TURNS OFF, you're in business when it comes to booting, but
there is likely something that has stopped the network. It's not a brick,
but be ready to troubleshoot.
拔下USB也不能启动了，SSH也连不上。
请教如何制作介绍上所说的，手上没有其他linux的设备了，window下需要如何操作？
Place your boot drive in another Linux computer/device and check the file
system. If you're still having issues then we'll proceed with starting from
scratch on the rootfs. Following steps 7 and 8 above, partition and format
the drive (using the correct /dev device, highly likely NOT sda). Download
and extract the root filesystem tarball onto the new ext3 partition as the
root user, not just sudo. Create a file at /usr/local/mac_addr and place in
it your Pro's MAC address (its on the bottom of the unit) in the format XX:
XX:XX:XX:XX:XX. Safely umount the drive from the computer, plug it back in
to the powered-off Pogoplug, and then plug in the Pogoplug.
第一次刷，就变砖? | x*z
发帖数: 1010 | 2 没砖。人不是描述得很清楚了么？网络有问题。看看你前面哪一步没有
严格按照它的来。如果没有的话，如果你linux熟的话，自己modify
rc.conf，有时候把启动项network多duplicate几次就行。
but
【在 n******l 的大作中提到】
: 按照这个link的介绍安装的
: http://archlinuxarm.org/platforms/armv6/pogoplug-provideov3
: 执行到14步骤的时候reboot，然后就出现如下的描述
: If your Pogoplug boots and the front LED blinks wildly for about 15-20
: seconds and then TURNS OFF, you're in business when it comes to booting, but
: there is likely something that has stopped the network. It's not a brick,
: but be ready to troubleshoot.
: 拔下USB也不能启动了，SSH也连不上。
: 请教如何制作介绍上所说的，手上没有其他linux的设备了，window下需要如何操作？
: Place your boot drive in another Linux computer/device and check the file
|
|
