l***x
发帖数: 2501 | 1 一块128G的M4，一块500G wd机械硬盘，把ssd格盘重装w8，结果装完之后发现机械硬盘
里面也干干净净，这下要吐血了。。 我格盘的时候还特别仔细看了的，应该没有把机
械硬盘格了。请问这是什么问题？有办法恢复吗？ |
u******a
发帖数: 7843 | 2 只要没往里面写数据, 任意一个数据恢复软件都可以恢复吧...
【在 l***x 的大作中提到】
: 一块128G的M4，一块500G wd机械硬盘，把ssd格盘重装w8，结果装完之后发现机械硬盘
: 里面也干干净净，这下要吐血了。。 我格盘的时候还特别仔细看了的，应该没有把机
: 械硬盘格了。请问这是什么问题？有办法恢复吗？
|
l********g
发帖数: 5070 | 3 任意数据软件恢复出来的大都是一团渣，想从中挑出有用的还真挺难的
【在 u******a 的大作中提到】
: 只要没往里面写数据, 任意一个数据恢复软件都可以恢复吧...
|
u******a
发帖数: 7843 | 4 有些牛逼的可以恢复目录结构的.
【在 l********g 的大作中提到】
: 任意数据软件恢复出来的大都是一团渣，想从中挑出有用的还真挺难的
|
l***x
发帖数: 2501 | 5 试了下easy recover，有一半数据没了，晕 |
b***3
发帖数: 1482 | |
d*******3
发帖数: 6550 | 7 确定没有格的话有可能是驱动问题
你装完新系统应该把该装的驱动先装一边再说.
我上次和你差不多情况, 不过是加了个3T的硬盘,然后只显示了一个分区.后来网上查是
驱动问题,更新最新的intel rapid storage以后一切都恢复了... |
w*r
发帖数: 2421 | 8 NTFS stores redundant copy of MFT and partition records. You can rescue the
data.
First thing you do is not to try rescue data, but do a full disk image.
1. boot into linux
2. use DD command to make a full copy of your disk to another location.
3. Use open source tool like testdisk to scan for the MFT and partition
table.
4. restore the partition table and MFT.
I had successfully done this before several years back. At that time the
testdisk software was probably named differently. I had a friend whose whole
Phd career was accidentally formatted together with another Phd's research
work on the same drive. and both of them were suppose to be graduated in
another 10 months. I was told by them that it was a FAT32 disk, and then I
started analyze the FAT table to see whether I can rebuild the FAt table.
AFter reading the dump, I figured it was definitely not FAT therfore I turn
to possibility of NTFS. And I did use the tool to scan the disk and found
the redundant copy of MFT and partition table. I dump the partition table
back and MFT back using dd command and then everything was restored.
The keypoint here is to make that redundant copy in step 1. I even went
further at the time to buy the exact same disk with same model/rev number to
make a full disk to disk dd copy to avoid any unknown factors. I only made
changes to the disk which I copied TO so that I made no CHANGE to the
original disk. After I abandon the FAT possibility, I made second attempt
from step 1 and then second try was successful.
【在 l***x 的大作中提到】
: 一块128G的M4，一块500G wd机械硬盘，把ssd格盘重装w8，结果装完之后发现机械硬盘
: 里面也干干净净，这下要吐血了。。 我格盘的时候还特别仔细看了的，应该没有把机
: 械硬盘格了。请问这是什么问题？有办法恢复吗？
|
l***x
发帖数: 2501 | 9
郁闷，早知道先试一下这个方法了
【在 d*******3 的大作中提到】
: 确定没有格的话有可能是驱动问题
: 你装完新系统应该把该装的驱动先装一边再说.
: 我上次和你差不多情况, 不过是加了个3T的硬盘,然后只显示了一个分区.后来网上查是
: 驱动问题,更新最新的intel rapid storage以后一切都恢复了...
|
F****3
发帖数: 1504 | |
