n*******e
发帖数: 62 | 1 新来了N300刷了DD-WRT。刷机过程一切顺利。刷完后，有限连接畅通无阻。可是在试图
设置无线局域网连接时，无论"security mode"设什么，甚至disable了，别的设备都连
不上去，KINDLE FIRE总抱怨authenticating failed.下面是我的一些设置：
wireless mode: AP
wireless network mode: MIXED
wireless channel: auto
channel width: auto
wireless SSID broadcast: enable
sensitivity range: 2000
network configuration: bridged
Wirelsss security:
security mode: 试了disabled, wpa personal, wpa2 personal,
wpa aloghriths: AES
key renewal interval:3600
mac filter is disabled.
Authentication type: 试了“auto"和“shared key".
MIMO-transimission fixed rate: auto
transmission fixed rate: auto
frame burst : disable
Network:
DHCP type : DHCP server
DHCP server: enable
use DNSmasq for DHCP: not checked.
use DNSmasq for DNS: not checked.
DHCP-authoritativve: greyed out cannot change it.
谢谢大牛指点。 | Z**0
发帖数: 1119 | | g*******t
发帖数: 7704 | | n*******e
发帖数: 62 | 4 谢谢大家回复！终于解决了。
解决方案将
wireless network mode: MIXED
改为
wireless network mode: g-only |
|
