m********u
发帖数: 3942 | 1 居然有这么多硬件职位也是不容易。。。 公司希望圣诞节前招到人，有兴趣的同学请
及时跟我联系~ 站内或者邮件 [email protected]
5个职位是：
1.Antenna/Mmwave Design Engineer
2.Navigation Engineer-GPS Systems
3.Technician
4.Sr. SWE-Embeded
5.Mechanical Engineer
1. Antenna/Mmwave Design Engineer
Here's what you will do:
Define antenna design/architecture requirements in overall system
performance and lead design review
Develop mm-wave antenna design from concept, simulation to design completion
Validate mm-wave antenna performance from manufacture to far-field antenna
performance characterization.
Work with RF board design engineer and mechanical engineer from integrated
system design to in the lab bring-up, test and validate physical hardware,
and transition hardware from prototype to volume manufacturing
Here's what we'd like to see in you:
5+ years of experience in antenna designs and at least 2-3+ years mm-wave
antenna design experiences
Experiences in Mm-wave passive component designs like splitter/combiner,
connector launch designs and etc.
Experiences in 3D EM simulations like HFSS or similar
Familiarity with E-band radar design and system architecture is a plus
2.Navigation Engineer-GPS Systems
Here's what you will do:
Perform advanced navigation system design and analysis, integration support,
and system performance assessment
Develop hardware/software in the areas of Global Positioning Systems (GPS),
inertial sensors, integrated INS/GPS navigation, and alternative navigation
sensors
Derive technical solutions to complex navigation problems that require
application of advanced technical principles
Develop navigation system architectures, interfaces, and requirements
Devise and implement advanced navigation algorithms to utilize non-GPS
aiding sources
Utilize six degree of freedom simulation or covariance analysis tool to
perform navigation trade studies and demonstrate performance results
Analysis and risk assessment of navigation performance in simulation and
hardware subsystem test
Here's what we'd like to see in you:
5+ years of experience in vehicle navigation design and analysis, including
architecture design, requirements development, and performance analysis
Experience in the development and employment of modeling and simulation
tools, including six degree of freedom simulations.
Proficient with inertial navigation mechanizations, Kalman filters, as well
as modeling and simulation of inertial measurement units and GPS receivers.
Research and/or applied experience in advanced navigation system design for
GPS-denied or GPS degraded conditions
Familiarity with embedded software development and hardware/software
integration
3. Technician（仅限大公司full time的候选人，不考虑contractor）
Strong PCB soldering and rework skills
Proficient mechanical assembly capabilities
Electrical harness assembly skills
Lab inventory management and tracking
Ability to implement and maintain safety precautions, organize general lab
activities and enforce lab policy
ESD trained
Proficiency with standard lab equipment including oscilloscopes, power
supplies, and multi-meter
Organized self-starter
Basic Knowledge of vehicle mechanical and electrical system
4. Sr. SWE-Embeded
Here's what you will do:
Work with a talented group of engineers and architects to develop automotive
-grade control systems for large volume production.
Gather system requirements and help define relevant application APIs.
Simulate, prototype, test, design, and debug functions of the selected
sensors and their driver software.
Interact with partners in the supply chain, such as car manufacturers,
sensor providers, and so on.
Here's what we'd like to see in you:
5+ years of hands-on experience in Linux kernel and/or embedded systems
engineering (e.g., BSPs).
Experience in device driver designs that involve sensor control and data
acquisition.
Experience with a real-time control system or embedded OS.
Experience with x86 and ARM based architecture.
Detail oriented and engineering excellence in previous work.
Excellent oral and written communication skills.
B.S. in Computer Science or equivalent technical discipline. M.S. preferred.
5. Mechanical Engineer
Here's what you will do:
Work with a talented group of engineers and architects to develop automotive
-grade control systems for large volume production.
You will be responsible for designing, developing, and engineering the
structure, interconnections, and thermal solutions for electronics in a
lightweight vehicle environment.
Develop, document, verify and validate product mechanical and thermal design.
Work closely with multifunctional teams in analyzing existing system
performance, and integrate this knowledge into future generation system
design.
Here's what we'd like to see in you:
B.S. in Mechanical Engineering or equivalent technical discipline, Masters
preferred.
5+ years of experience or equivalent of mechanical design and analysis of
electronics packaging, industrial equipment design along with automotive
electronics experience preferred.
Must have excellent working knowledge of mechanical engineering and design
principles for manufacturing, sheet metal, injection molding, welding and
casting, electrical interconnected systems, and vibration control.
Possess a good understanding of the competing relationship between thermal,
mechanical, electrical, and power requirements.
Design experience in:
Complex electro-mechanical systems;
Tolerance Analysis;
Finite Element Analysis;
Structure/Vibration analysis;
Must be proficient in 3D solid modeling CAD. Strongly prefer SolidWorks. | m********u
发帖数: 3942 | | y**********u
发帖数: 2839 | 3 自动驾驶可以看成是我辈猥琐老硬工的第二春啊，帮顶 |
|
