l*******e
发帖数: 3584 | 1 Image Name: Linux-2.6.32-5-kirkwood
Created: Fri Feb 11 04:03:35 2011
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1431872 Bytes = 1398.31 kB = 1.37 MB
Load Address: 0x00008000
Entry Point: 0x00008000
Image Name: initramfs-2.6.32-5-kirkwood
Created: Fri Feb 11 04:03:36 2011
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 4738120 Bytes = 4627.07 kB = 4.52 MB
Load Address: 0x00000000
Entry Point: 0x00000000
Installation complete
You can now reboot your device into Debian.
If your device does not start Debian after rebooting,
you may need to restart the device by disconnecting the power.
The new root password is 'root' Please change it immediately after
logging in.
Reboot now? [Y/n] y
after reboot, nothing work, uboot choice the USB disk, and then stop working
. Even not IP address was set up to it.
Need help. | l*******e
发帖数: 3584 | 2 somebody mentioned like this
Got it, I guess installing pluglinux first change some uboot parm so I
reinstalled uboot from jeffs site (well really just cleared the parm) and
reinstalled again and Im running Debian now :)
He has exactly the same problem with me. I will try this and report later.
But does anybody have idea of what did UBOOT write for plugapp linux, which
can not been used by DEBIAN? | b**r
发帖数: 352 | 3 More details please.
when in uboot, type "printenv" to see your bootargs,how are they setup?
what exactly does the console output when attempting to boot kernel? | l*******e
发帖数: 3584 | 4 Could you give me a little more detail?
I can just boot into UBOOT and SSH onto it, give me the result like
__________
TERM=vt100
SHELL=/bin/bash
USER=root
PATH=/usr/bin:/bin:/sbin
PWD=/root
PS1=\h:\w$
SHLVL=1
HOME=/root
LOGNAME=root
_=/bin/printenv
___________
I also have the choice to boot from UBOOT to plugapp linux, but I did
not
install the netconsole yet, and I am not sure how I can use it.
______________
XDG_DATA_HOME=/root/.local/share
TERM=vt100
SHELL=/bin/bash
HISTSIZE=1000
SSH_CLIENT=192.168.1.148 2137 22
SSH_TTY=/dev/pts/0
USER=root
XDG_CONFIG_DIRS=/etc/xdg
MAIL=/var/mail/root
PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/bin/perlbin/site:/usr/bin/perlbi
n/vendor:/usr/bin/perlbin/core
INPUTRC=/etc/inputrc
PWD=/root
LANG=en_US.UTF-8
PS1=[\u@\h \W]\$
PS3=>
HISTCONTROL=erasedups
PS2=>
SHLVL=1
PS4=+
HOME=/root
XDG_CONFIG_HOME=/root/.config
XDG_CACHE_HOME=/root/.cache
LESS=-R
LOGNAME=root
XDG_DATA_DIRS=/usr/share/:/usr/local/share/
SSH_CONNECTION=192.168.1.148 2137 192.168.1.146 22
PKG_CONFIG_PATH=/usr/lib/pkgconfig
G_BROKEN_FILENAMES=1
_=/usr/bin/printenv
_____________
The third is I connect disk installed with Debian but I do not know how
to
SSH into it, since ....
For the "printenv", when should I use it?
Thanks.
setup?
【在 b**r 的大作中提到】
: More details please.
: when in uboot, type "printenv" to see your bootargs,how are they setup?
: what exactly does the console output when attempting to boot kernel?
| l*******e
发帖数: 3584 | 5 _________
You are already running the latest uBoot.
Would you like to reset the uBoot environment? [N/y] y
_________
and then reinstall Debian,
after reboot
__________
Linux debian 2.6.32-5-kirkwood #1 Wed Jan 12 15:27:07 UTC 2011 armv5tel
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
___________
Thanks a lot. | b**r
发帖数: 352 | 6 looks like your kernel already up running, it's not uboot.
see your kernel rev by typing in "uname -a"
typically uboot output is directed to serial console, i dont think it
supports SSH. |
|
