w*s
发帖数: 7227 | 1 this is my understanding, pls correct me if it's wrong.
the SNMP agent is running in the embedded system in the lab,
i'm sitting in the cube to get SNMP info in my desktop pc (SNMP manager).
how should i configure the snmpd.conf in the embedded system,
so it only passes info back to my desktop.
i went through the man page twice and just cannot find it ...
many thanks ! |
x**m
发帖数: 941 | 2 1. Authentication: SNMPv3
2. Firewall: IPtables |
w*s
发帖数: 7227 | 3 咪咪, thanks, but why SNMP v3, not v1, v2 ?
【在 x**m 的大作中提到】
: 1. Authentication: SNMPv3
: 2. Firewall: IPtables
|
x**m
发帖数: 941 | |
w*s
发帖数: 7227 | 5 Hi xmmm,
i need to send trap to the snmp manager (10.50.180.124),
how do u think about the following snmpd.conf ?
thanks !
rocommunity myCommunity
rocommunity myTrapComm
com2sec mySec default myCommunity
com2sec mySec2 default myTrapComm
group MyRWGroup v1 mySec
group MyRWGroup v2c mySec
group MyRWGroup v1 mySec2
group MyRWGroup v2c mySec2
view all included .1 80
access MyRWGroup "" any noauth exact all all none
syslocation MA
syscontact wds
#######################3
authtrapenable 1
trapcommunity myTrapComm
trap2sink 10.50.180.124
【在 x**m 的大作中提到】
: http://en.wikipedia.org/wiki/Simple_Network_Management_Protocol
|
x**m
发帖数: 941 | 6 这个不太懂，一般我都是从监控服务器上去抓，想来要安全些。 |
w*s
发帖数: 7227 | 7 thanks again , :)
【在 x**m 的大作中提到】
: 这个不太懂，一般我都是从监控服务器上去抓，想来要安全些。
|
