由买买提看人间百态

boards

本页内容为未名空间相应帖子的节选和存档,一周内的贴子最多显示50字,超过一周显示500字 访问原贴
Linux版 - Linux 换 Monitor 出问题
相关主题
what packages needed to init 5 X11考验一下大家的浏览器
[合集] ubuntu 10。4接电视 的问题SUES 里居然没有改显示分辨率的控制面板?
how to start KDE from fedora command line?正式加入Mac user行列 (转载)
Mac 上能裝 triple boot 麼?how to build short cut to insert a text under vi?
help! dvi-D to vgaubuntu 8.10 刷新率改变后出现input not supported
ubuntu 11.10如何驱动俩外植显示器xfrce里的scim怎么出来?
T420s+N独显dock无法切换显示器做个调查。大家都用什么linux distro?
xrandr 双屏显示问题发现 debian 5.0 还是简朴多了
相关话题的讨论汇总
话题: monitor话题: dvi话题: video话题: boot话题: card
进入Linux版参与讨论
1 (共1页)
J******3
发帖数: 697
1
LINUX菜鸟。刚刚在一台Dell OptiPlex760 上装了CentOS 6.2。还比较顺利。后来因故欢乐Monitor (都是Dell的LCD, 但Size相差很大)。就没有任何信号了。如果把Monitor接在主板的VGA接口上,无法Boot,因为“Your computer has an add-in video card." 如果接在add-in video card 的DVI (Dual DVI Splitter) 上,听声音似乎Boot了,但Monitor 看不到信号。大侠们请帮忙。
补充:我后来把原来的Monitor换回来,结果还是不工作,跟上面描述的症状一样。
J******3
发帖数: 697
2
大侠们都没空么?

故欢乐Monitor (都是Dell的LCD)。就没有任何信号了。如果把Monitor接在主板的
VGA接口上,无法Boot,因为“Your computer has an add-in video card." 如果接在
add-in video card 的DVI (Dual DVI Splitter) 上,听声音似乎Boot了,但Monitor
看不到信号。大侠们请帮忙。

【在 J******3 的大作中提到】
: LINUX菜鸟。刚刚在一台Dell OptiPlex760 上装了CentOS 6.2。还比较顺利。后来因故欢乐Monitor (都是Dell的LCD, 但Size相差很大)。就没有任何信号了。如果把Monitor接在主板的VGA接口上,无法Boot,因为“Your computer has an add-in video card." 如果接在add-in video card 的DVI (Dual DVI Splitter) 上,听声音似乎Boot了,但Monitor 看不到信号。大侠们请帮忙。
: 补充:我后来把原来的Monitor换回来,结果还是不工作,跟上面描述的症状一样。

J******3
发帖数: 697
3
什么信号都没有,而且换回原来的Monitor也不工作,有没有可能是Cable的问题?如果
能有信号,我就重装好了。现在什么都看不见,装都没发装。
G*****h
发帖数: 33134
4
ALT-CTL-F1,F2,F3 进字符界面

【在 J******3 的大作中提到】
: 什么信号都没有,而且换回原来的Monitor也不工作,有没有可能是Cable的问题?如果
: 能有信号,我就重装好了。现在什么都看不见,装都没发装。

J******3
发帖数: 697
5
Update: 发现Monitor不是完全没有信号。如果断开连接,显示器会显示自我检测,一
旦连上,自我检测提示就再没有了。
Alt+Ctrl+F1-F12都没有反应。
a9
发帖数: 21638
6
那个显示信号貌似没啥用。

【在 J******3 的大作中提到】
: Update: 发现Monitor不是完全没有信号。如果断开连接,显示器会显示自我检测,一
: 旦连上,自我检测提示就再没有了。
: Alt+Ctrl+F1-F12都没有反应。

J******3
发帖数: 697
7
Update2:
1) Both monitors are functional when tested on another Windows computer
connected through VGA on the motherboard (This laptop has no add-in video
card)
2) If connected to the Linux machine (Dell Optiplex 760) through VGA on
mother board, computer can not boot because “Configuration error. Your
computer has an add-in video card. Do the following: turn off the computer,
connect monitor to the add-in video card (you may need a DVI adaptor or DVI
cable blahblah); turn on the computer again, and this should disappear
blahblah"
3) Did as instructed, no show whatever on either monitor, but the sound
seems to tell me the computer booted.
4) Turn off computer, disconnect hard disk, boot with a Windows7 rescue disk
, same thing happened as described in 2) and 3).
Video card or DVI cable problem?


故欢乐Monitor (都是Dell的LCD, 但Size相差很大)。就没有任何信号了。如果把
Monitor接在主板的VGA接口上,无法Boot,因为“Your computer has an add-in
video card." 如果接在add-in video card 的DVI (Dual DVI Splitter) 上,听声音
似乎Boot了,但Monitor 看不到信号。大侠们请帮忙。

【在 J******3 的大作中提到】
: LINUX菜鸟。刚刚在一台Dell OptiPlex760 上装了CentOS 6.2。还比较顺利。后来因故欢乐Monitor (都是Dell的LCD, 但Size相差很大)。就没有任何信号了。如果把Monitor接在主板的VGA接口上,无法Boot,因为“Your computer has an add-in video card." 如果接在add-in video card 的DVI (Dual DVI Splitter) 上,听声音似乎Boot了,但Monitor 看不到信号。大侠们请帮忙。
: 补充:我后来把原来的Monitor换回来,结果还是不工作,跟上面描述的症状一样。

J******3
发帖数: 697
8
Video Card on the Dell Optiplex 760: Ati Radeon Hd 3450 256MB DMS-59
http://www.ascendtech.us/ati-radeon-hd-3450-256mb-dms-59-tv-pci
The video card can be connected either through S-video or DVI cable DMS-59 (DVI splitter) http://www.google.com/products/catalog?q=DMS-59&hl=en&client=firefox-a&cid=8968716920545805104&ei=KvyfT8utLozImgfLu7SGCw&ved=0CBoQrhI. I have not tried the S-video connection yet.
p******g
发帖数: 347
9
Most likely it's just the x display configure file is messed up when u
switched to the new monitor. basically it's caused by different screen
resolutions.
what u need to do is, no need to attach any monitors to your pc. just boot
it up, login to the machine from another one, fix the X11 config, most
likely the /etc/X11/xorg.conf. see if there's any automatically backed up
ones in that directory, and try to use that one.

,
DVI

【在 J******3 的大作中提到】
: Update2:
: 1) Both monitors are functional when tested on another Windows computer
: connected through VGA on the motherboard (This laptop has no add-in video
: card)
: 2) If connected to the Linux machine (Dell Optiplex 760) through VGA on
: mother board, computer can not boot because “Configuration error. Your
: computer has an add-in video card. Do the following: turn off the computer,
: connect monitor to the add-in video card (you may need a DVI adaptor or DVI
: cable blahblah); turn on the computer again, and this should disappear
: blahblah"

J******3
发帖数: 697
10
Thanks a lot..
How can I login from another machine? It has internet setup (through my
router) so I know its IP assigned by my router (luckily, I setup fixed IP
instead of DHCP), but I have not setup any remote login, except if there is
such function built-in in the CentOS6.2. I installed with LiveCD, so it's
neither minimal nor complete install.
Update:Ping 的结果是Unreacheable。其它的连在我的Router上的机器都可以Ping得到。是不是这个Linux机器要Login以后Internet才会连上?

【在 p******g 的大作中提到】
: Most likely it's just the x display configure file is messed up when u
: switched to the new monitor. basically it's caused by different screen
: resolutions.
: what u need to do is, no need to attach any monitors to your pc. just boot
: it up, login to the machine from another one, fix the X11 config, most
: likely the /etc/X11/xorg.conf. see if there's any automatically backed up
: ones in that directory, and try to use that one.
:
: ,
: DVI

相关主题
ubuntu 11.10如何驱动俩外植显示器考验一下大家的浏览器
T420s+N独显dock无法切换显示器SUES 里居然没有改显示分辨率的控制面板?
xrandr 双屏显示问题正式加入Mac user行列 (转载)
进入Linux版参与讨论
J******3
发帖数: 697
11
用主板VGA连接的时候,起码还能看到Boot开始的信息,只是不能完成Boot。 连在
VideoCard上连Boot的任何信息都看不到,我想重装或换回Windows都没办法。有没有可
能是VideoCard或者DVI DMS-59 连接出了问题?刚开始Boot是不是还没有进入Linux?
是不是应该是主板识别Monitor?不好意思,这都是我瞎猜的。大侠们请多指教。
r***a
发帖数: 2628
12
remove your video card and start with mother board vga.
J******3
发帖数: 697
13
这倒是个办法。不知道拿掉VideoCard会不会造成新问题。大侠们谁有经验?

【在 r***a 的大作中提到】
: remove your video card and start with mother board vga.
t**x
发帖数: 20965
14
被你轻松搞定的话,微软早就关门了。
y***d
发帖数: 2330
15
you need to go into the bios and set what should be the primary video port (
onboard vs card), and you want to choose the video card one.
Right now just connect to the onboard port to go to the bios, while later
you may need to use the on-card one.

【在 J******3 的大作中提到】
: 用主板VGA连接的时候,起码还能看到Boot开始的信息,只是不能完成Boot。 连在
: VideoCard上连Boot的任何信息都看不到,我想重装或换回Windows都没办法。有没有可
: 能是VideoCard或者DVI DMS-59 连接出了问题?刚开始Boot是不是还没有进入Linux?
: 是不是应该是主板识别Monitor?不好意思,这都是我瞎猜的。大侠们请多指教。

J******3
发帖数: 697
16
试过了,不让进BIOS。直接出“COnfiguration error, action is needed. Your
computer has an add-in video card, .....". 非逼着我换回VideoCard Connection


(

【在 y***d 的大作中提到】
: you need to go into the bios and set what should be the primary video port (
: onboard vs card), and you want to choose the video card one.
: Right now just connect to the onboard port to go to the bios, while later
: you may need to use the on-card one.

J******3
发帖数: 697
17
哈哈,搞定了。原来是DVI Adaptor 上面一根针歪了没接上。其实早注意到了,只因为歪的形状和位置特别好,看起来似乎是制造的时候特意让那根针不连接,就没有怀疑。查了所有DVI Adaptor的格式,没有这一种,才怀疑是针歪了。一掰过来就一切OK。估计是换Monitor的时候不小心把它弄歪了。
多谢各位帮忙!!!!

故欢乐Monitor (都是Dell的LCD, 但Size相差很大)。就没有任何信号了。如果把
Monitor接在主板的VGA接口上,无法Boot,因为“Your computer has an add-in
video card." 如果接在add-in video card 的DVI (Dual DVI Splitter) 上,听声音
似乎Boot了,但Monitor 看不到信号。大侠们请帮忙。

【在 J******3 的大作中提到】
: LINUX菜鸟。刚刚在一台Dell OptiPlex760 上装了CentOS 6.2。还比较顺利。后来因故欢乐Monitor (都是Dell的LCD, 但Size相差很大)。就没有任何信号了。如果把Monitor接在主板的VGA接口上,无法Boot,因为“Your computer has an add-in video card." 如果接在add-in video card 的DVI (Dual DVI Splitter) 上,听声音似乎Boot了,但Monitor 看不到信号。大侠们请帮忙。
: 补充:我后来把原来的Monitor换回来,结果还是不工作,跟上面描述的症状一样。

c***r
发帖数: 4631
18
这个,实在太难了。
G*****h
发帖数: 33134
19
你真牛。。。

为歪的形状和位置特别好,看起来似乎是制造的时候特意让那根针不连接,就没有怀疑
。查了所有DVI Adaptor的格式,没有这一种,才怀疑是针歪了。一掰过来就一切OK。
估计是换Monitor的时候不小

【在 J******3 的大作中提到】
: 哈哈,搞定了。原来是DVI Adaptor 上面一根针歪了没接上。其实早注意到了,只因为歪的形状和位置特别好,看起来似乎是制造的时候特意让那根针不连接,就没有怀疑。查了所有DVI Adaptor的格式,没有这一种,才怀疑是针歪了。一掰过来就一切OK。估计是换Monitor的时候不小心把它弄歪了。
: 多谢各位帮忙!!!!
:
: 故欢乐Monitor (都是Dell的LCD, 但Size相差很大)。就没有任何信号了。如果把
: Monitor接在主板的VGA接口上,无法Boot,因为“Your computer has an add-in
: video card." 如果接在add-in video card 的DVI (Dual DVI Splitter) 上,听声音
: 似乎Boot了,但Monitor 看不到信号。大侠们请帮忙。

J******3
发帖数: 697
20
不好意思,新手出的问题也比较奇怪。费了我两天功夫。
想学一点Linux的系统管理,以后肯定还有一堆问题,还望各位大侠多帮忙。

【在 G*****h 的大作中提到】
: 你真牛。。。
:
: 为歪的形状和位置特别好,看起来似乎是制造的时候特意让那根针不连接,就没有怀疑
: 。查了所有DVI Adaptor的格式,没有这一种,才怀疑是针歪了。一掰过来就一切OK。
: 估计是换Monitor的时候不小

c***r
发帖数: 4631
21
别在干活的机器上折腾,血的教训。
J******3
发帖数: 697
22
多谢忠告。周围的朋友也是这么说。特地找了一台不用的机器打算使劲折腾。

【在 c***r 的大作中提到】
: 别在干活的机器上折腾,血的教训。
1 (共1页)
进入Linux版参与讨论
相关主题
发现 debian 5.0 还是简朴多了help! dvi-D to vga
问个问题,关于X11 displayubuntu 11.10如何驱动俩外植显示器
为啥 im-switch -s fcitx 了还是 scim 出来?T420s+N独显dock无法切换显示器
新服务器的xwindows问题xrandr 双屏显示问题
what packages needed to init 5 X11考验一下大家的浏览器
[合集] ubuntu 10。4接电视 的问题SUES 里居然没有改显示分辨率的控制面板?
how to start KDE from fedora command line?正式加入Mac user行列 (转载)
Mac 上能裝 triple boot 麼?how to build short cut to insert a text under vi?
相关话题的讨论汇总
话题: monitor话题: dvi话题: video话题: boot话题: card