g*****9 发帖数: 4125 | 6 If the sander is powerful, make sure you keep it moving all the time, start
and stop could be tricky. Otherwise it is not hard, some sander will need to
go with the wood grain, some not, read instructions twice before you start.
Depending how much you plan to take off (depending on the condition of your
floor), do not use very coarse sand paper if possible, one medium grit
followed by one fine grit (unless you have very deep damage you try to take
out).
【在 L***s 的大作中提到】 : 分享一下注意事项。 : 多谢了
|