D*********u 发帖数: 288 | 1 我看了一下,discharge就是割下来的草直接从旁边扔出去,mulch就是把那个孔堵上,然
后草就在里面被刀刃象搅拌机一样打得非常碎.
可是问题来了,打得狠碎的草由于草本身的水分,几乎是成糊糊状,大量粘着于机器底盘,
割了十来分钟,就要停机,然后设法把那些草糊糊都抖下来,完全不是想象中那样打得粉
碎然后散落于草地.
你们的机器都这样么,还是我的割草机设计的太suck | m***y 发帖数: 14763 | 2 Was there any rain recently? If so, do it on a hot, sunny, still day. | g*****9 发帖数: 4125 | 3 You are cutting too much off at one time.
You need to raise the height or cut more often.
I do not suggest you cut more than 1 inch off each time, I usually cut off 1
/3 inch each time. During fast growing season, that means cut every other
day. Much better for the grass.
Also make sure your blade is sharp, a dull blade torn off the grass instead
of a clean cut, it hurt the grass more and can get diease more easy. A clean
cut will produce much greener grass, dull torn off will produce yellow
wou
【在 D*********u 的大作中提到】 : 我看了一下,discharge就是割下来的草直接从旁边扔出去,mulch就是把那个孔堵上,然 : 后草就在里面被刀刃象搅拌机一样打得非常碎. : 可是问题来了,打得狠碎的草由于草本身的水分,几乎是成糊糊状,大量粘着于机器底盘, : 割了十来分钟,就要停机,然后设法把那些草糊糊都抖下来,完全不是想象中那样打得粉 : 碎然后散落于草地. : 你们的机器都这样么,还是我的割草机设计的太suck
| c****o 发帖数: 32446 | | H******7 发帖数: 34403 | |
|