B***r 发帖数: 534 | 1 家里有两扇门打开后老是自己就关上,我想让它能停留在一个位置上,怎么调啊?
多谢! |
q**l 发帖数: 505 | 2 不知道。好像不好办啊。门框比萨斜塔了啊。挪挪合页? |
c****o 发帖数: 32446 | |
p*a 发帖数: 3350 | 4 荷叶上的螺丝松了
【在 B***r 的大作中提到】 : 家里有两扇门打开后老是自己就关上,我想让它能停留在一个位置上,怎么调啊? : 多谢!
|
g********3 发帖数: 1281 | 5 use door stopper
【在 B***r 的大作中提到】 : 家里有两扇门打开后老是自己就关上,我想让它能停留在一个位置上,怎么调啊? : 多谢!
|
g*****9 发帖数: 4125 | 6 Your problem is door jamb is not perfectly verticle or door hinge is not
straight.
Use a long level and some shim should be able to fix it.
If you have not done this before, take your time, do not rush.
Shim the jamb to be perfectly verticle first (z axis)
Second make sure, all 3 hinges are in a straight line (z axis is not bowed)
Your door should be able to stop at any position after that.
【在 B***r 的大作中提到】 : 家里有两扇门打开后老是自己就关上,我想让它能停留在一个位置上,怎么调啊? : 多谢!
|
g*****9 发帖数: 4125 | 7 Your problem is door jamb is not perfectly verticle or door hinge is not
straight.
Use a long level and some shim should be able to fix it.
If you have not done this before, take your time, do not rush.
Shim the jamb to be perfectly verticle first (z axis)
Second make sure, all 3 hinges are in a straight line (z axis is not bowed)
Your door should be able to stop at any position after that.
【在 B***r 的大作中提到】 : 家里有两扇门打开后老是自己就关上,我想让它能停留在一个位置上,怎么调啊? : 多谢!
|