f******s 发帖数: 4020 | 1 家里的坏了,我从网上order了个新的.老公居然说他不会装。气死我了。 |
C*******d 发帖数: 15836 | 2 I did that.
It is not that difficult but not easy either. It needs some tools like
plumber's wrench, putty, thread tape, etc. There are videos online to teach
you how to do that, and you should also follow the installation instruction. |
f******s 发帖数: 4020 | 3 老公说有什么电路问题,不敢乱来。是这样吗?
teach
instruction.
【在 C*******d 的大作中提到】 : I did that. : It is not that difficult but not easy either. It needs some tools like : plumber's wrench, putty, thread tape, etc. There are videos online to teach : you how to do that, and you should also follow the installation instruction.
|
C*******d 发帖数: 15836 | 4 Yes, you need to disconnect the electric wires from the old disposer and
connect them to the new one. But as long as you turn off the disposer switch
, it should be safe (You can always use a multimeter to check that). So it
was a very tiny issue for me during my installation.
【在 f******s 的大作中提到】 : 老公说有什么电路问题,不敢乱来。是这样吗? : : teach : instruction.
|
f******s 发帖数: 4020 | 5 Thanks!
switch
【在 C*******d 的大作中提到】 : Yes, you need to disconnect the electric wires from the old disposer and : connect them to the new one. But as long as you turn off the disposer switch : , it should be safe (You can always use a multimeter to check that). So it : was a very tiny issue for me during my installation.
|
w******i 发帖数: 1899 | |
f******s 发帖数: 4020 | 7 能干啥?我又不会装。
【在 w******i 的大作中提到】 : 羡慕这样的老婆,太能干了
|
e********t 发帖数: 9607 | 8 我装的disposer跟一般电器一样,直接往插座里插的。
觉得可能有点困难的是新的跟旧的接口位置不是完全一致,这要就要调整相关下水管道
的长短和位置。
【在 f******s 的大作中提到】 : 老公说有什么电路问题,不敢乱来。是这样吗? : : teach : instruction.
|
|
w***z 发帖数: 1158 | 9 先把闸跳了,再按说明书操作就行了。别忘了去买点油泥(putty)。 |
h***b 发帖数: 1233 | 10 the garbage disposer is pretty heavy. 在 sink 下面空间有限,装不难,但挺累
的,因为姿势,角度很别扭 |
|
|
R******n 发帖数: 687 | 11 如果尺寸不一样,要改水管就麻烦点。但下水管都是PVC, 搞起来一般也不难。不接插
头不就没电吗?有什么电路问题? |
s**********d 发帖数: 36899 | 12 你老公是wimp你只好自己干了。
没有任何电路问题。只是下水管对不上可能要调位置,可能需要锯PVC管。
一个简单手锯就行了。
另外就是上螺丝时因为空间可能很费劲,要一个人帮着举disposer. |
s**********d 发帖数: 36899 | 13 我装的也是插座。洗碗机是拧上的线。
【在 e********t 的大作中提到】 : 我装的disposer跟一般电器一样,直接往插座里插的。 : 觉得可能有点困难的是新的跟旧的接口位置不是完全一致,这要就要调整相关下水管道 : 的长短和位置。
|
k**u 发帖数: 10502 | 14 灰常容易,当然最好先找个youtube视频看一遍。
根本没有电路问题,插上插头就好了。
【在 f******s 的大作中提到】 : 家里的坏了,我从网上order了个新的.老公居然说他不会装。气死我了。
|
b*******a 发帖数: 304 | 15 装的时候用个千斤顶(汽车上的那种就行了),这样就不用另外一个人举着了 |