t*****g 发帖数: 5282 | 1 【 以下文字转载自 Automobile 讨论区 】
发信人: tracing (闷声发大财), 信区: Automobile
标 题: 拧撤轮胎螺帽的电钻不能加个头拧钉子螺丝吗
发信站: BBS 未名空间站 (Fri Jan 17 13:52:04 2014, 美东)
钉子螺丝是普通的家具上那种螺丝,谢谢
包子 |
m******t 发帖数: 550 | 2 当然可以,一拧就把整个螺丝吃到木头里面了。
【在 t*****g 的大作中提到】 : 【 以下文字转载自 Automobile 讨论区 】 : 发信人: tracing (闷声发大财), 信区: Automobile : 标 题: 拧撤轮胎螺帽的电钻不能加个头拧钉子螺丝吗 : 发信站: BBS 未名空间站 (Fri Jan 17 13:52:04 2014, 美东) : 钉子螺丝是普通的家具上那种螺丝,谢谢 : 包子
|
t****t 发帖数: 610 | 3 大哥,那种东西都是〉200 ibs/ft,你扪心自问需要吗? |
t*****g 发帖数: 5282 | 4 你Google impact wrench和impact drill
【在 t****t 的大作中提到】 : 大哥,那种东西都是〉200 ibs/ft,你扪心自问需要吗?
|
t****t 发帖数: 610 | 5 拧撤轮胎螺帽的电钻= impact wrench
【在 t*****g 的大作中提到】 : 你Google impact wrench和impact drill
|
t*****g 发帖数: 5282 | 6 看错你的帖子了,原来你说的是wrench转速/功率太高。
我还是买了个30刀的impact drill,最大的区别是头部固定的方式不一样,一个旋紧的
一个是扣上去的
【在 t****t 的大作中提到】 : 拧撤轮胎螺帽的电钻= impact wrench
|
l*********8 发帖数: 1851 | 7 你是说impact driver还是drill?
【在 t*****g 的大作中提到】 : 看错你的帖子了,原来你说的是wrench转速/功率太高。 : 我还是买了个30刀的impact drill,最大的区别是头部固定的方式不一样,一个旋紧的 : 一个是扣上去的
|
t*****g 发帖数: 5282 | 8 上面写得 drill/driver
【在 l*********8 的大作中提到】 : 你是说impact driver还是drill?
|
F***Q 发帖数: 6599 | 9
all you need is an impact driver bit set. I have these two, work very well
with my driver
http://www.atgstores.com/screwdrivers/tekton-2938-14pc-quick-ch
http://www.sears.com/craftsman-100-piece-accessory-kit/p-009316
【在 t*****g 的大作中提到】 : 上面写得 drill/driver
|
t*****g 发帖数: 5282 | 10 太晚了,我已经拆了drill/driver了
【在 F***Q 的大作中提到】 : : all you need is an impact driver bit set. I have these two, work very well : with my driver : http://www.atgstores.com/screwdrivers/tekton-2938-14pc-quick-ch : http://www.sears.com/craftsman-100-piece-accessory-kit/p-009316
|
|
|
F***Q 发帖数: 6599 | 11
what? how does that help?
【在 t*****g 的大作中提到】 : 太晚了,我已经拆了drill/driver了
|
b*******7 发帖数: 907 | 12 这个电钻力量很大啊,什么型号?汽车轮胎的螺丝胳膊都拧不动,需要人上去蹦才行
【在 t*****g 的大作中提到】 : 太晚了,我已经拆了drill/driver了
|
F***Q 发帖数: 6599 | 13
my friend told me he got a 200 inch pounds (torque) impact driver from
harbor freight, making winter tire changing a breeze. then we checked out my
nextec impact driver, he was surprised that mine has 700 inch pounds torque
http://www.sears.com/craftsman-nextec-12.0-volt-right-angle-imp
【在 b*******7 的大作中提到】 : 这个电钻力量很大啊,什么型号?汽车轮胎的螺丝胳膊都拧不动,需要人上去蹦才行
|
f****i 发帖数: 20252 | 14 200inchpound太小,feetpound还差不多
my
torque
【在 F***Q 的大作中提到】 : : my friend told me he got a 200 inch pounds (torque) impact driver from : harbor freight, making winter tire changing a breeze. then we checked out my : nextec impact driver, he was surprised that mine has 700 inch pounds torque : http://www.sears.com/craftsman-nextec-12.0-volt-right-angle-imp
|
b*******7 发帖数: 907 | 15 unbelievable, 200 in.lb的impact driver真能拧汽车螺丝?我上次想换rotor,用气
钻由于air compressor的psi和cfm太小不行,试着手拧也不行,不得已找到修车行,告
诉我要上去蹦的。
my
torque
【在 F***Q 的大作中提到】 : : my friend told me he got a 200 inch pounds (torque) impact driver from : harbor freight, making winter tire changing a breeze. then we checked out my : nextec impact driver, he was surprised that mine has 700 inch pounds torque : http://www.sears.com/craftsman-nextec-12.0-volt-right-angle-imp
|
f****i 发帖数: 20252 | 16 lowes有个大力矩的impact wrench卖
【在 b*******7 的大作中提到】 : unbelievable, 200 in.lb的impact driver真能拧汽车螺丝?我上次想换rotor,用气 : 钻由于air compressor的psi和cfm太小不行,试着手拧也不行,不得已找到修车行,告 : 诉我要上去蹦的。 : : my : torque
|
F***Q 发帖数: 6599 | 17
maybe my friend read the specs wrong, 200 lb-ft? the one he bought costed
about $50 at HFT
【在 b*******7 的大作中提到】 : unbelievable, 200 in.lb的impact driver真能拧汽车螺丝?我上次想换rotor,用气 : 钻由于air compressor的psi和cfm太小不行,试着手拧也不行,不得已找到修车行,告 : 诉我要上去蹦的。 : : my : torque
|
b*****e 发帖数: 1193 | 18 200ft.lb的是impact wrench,下轮胎的至少要80ft.lb,
一般12v的impact driver 都小于1000in.lb |
t****t 发帖数: 610 | 19 Brake caliper mounting nuts usually have torque less than 150 ibs.ft. Next
time try a long break bar and use a floor jack to push the break bar.
【在 b*******7 的大作中提到】 : unbelievable, 200 in.lb的impact driver真能拧汽车螺丝?我上次想换rotor,用气 : 钻由于air compressor的psi和cfm太小不行,试着手拧也不行,不得已找到修车行,告 : 诉我要上去蹦的。 : : my : torque
|
b*******7 发帖数: 907 | 20
没看懂,200 in.lb?80 ft.lb = 960 in.lb
HFT卖50刀的那个700 in.lb
【在 b*****e 的大作中提到】 : 200ft.lb的是impact wrench,下轮胎的至少要80ft.lb, : 一般12v的impact driver 都小于1000in.lb
|