h****n 发帖数: 2094 | 1 好不容易找到一家便宜点的,他们报的东西都靠谱吗?价格合适吗?50年代单层1400尺
不到的老房子,北加州。拆除旧的duct是专门的石棉公司,不在报价中。我说要R8dcut
,他说要加400。谢谢!
Scope of Work:
1. Remove all the old furnace from closet.
2. Install 5/8’ platform in attic, extend ½’ gas line and 110v
electrical into attic.
3. Install a 70,000 BTU horizontal furnace, plenum coil and drain pans.
4. Install new 4” flue pipe, primary and secondary drains.
5. Run the 3/4’ lineset to the condenser location.
6. Install all new ducting using R-6 Mylar flex ducts, a filter grill, and a
new thermostat.
7. Remove and recycle all old parts.
Main Parts:
1. Carrier 70,000 BTU 80% furnace. Mod #58CTX
2. Carrier 3-ton 14 SEER condenser. Mod #24AAA5
3. ADP 3-ton plenum coil, 3/4x50’ copper lineset, 18/5 control wire,
secondary pans and drains.
4. B-vent 4” flue pipe, R-6 Mylar ducting.
5. ½” gas valve, gas flex, and filter grill.
6. Programmable thermostat, 30a circuit, 30a disconnect and fuses.
Total price parts and labor…………………………………………$8100.00 | i***e 发帖数: 9429 | | h****n 发帖数: 2094 | 3 多谢!我们计划在这个房子里住六年,请问这些东西行吗?好像都是最基本的。
【在 i***e 的大作中提到】 : 不算高, 但也不低,属合理吧。
| i***e 发帖数: 9429 | 4 行的,住六年的话, 装个D&N, tempstart,HEIL, comfortmaker 的就好了,在你那
边7500刀应该蛮稳的。卖房子的时候, 人看你的是外表和内部装修, 关心的是空调新
旧程度,不会在意牌子的。
【在 h****n 的大作中提到】 : 多谢!我们计划在这个房子里住六年,请问这些东西行吗?好像都是最基本的。
| h****n 发帖数: 2094 | 5 谢谢!刚知道你是女的,太厉害了!
【在 i***e 的大作中提到】 : 行的,住六年的话, 装个D&N, tempstart,HEIL, comfortmaker 的就好了,在你那 : 边7500刀应该蛮稳的。卖房子的时候, 人看你的是外表和内部装修, 关心的是空调新 : 旧程度,不会在意牌子的。
| i***e 发帖数: 9429 | 6 谁告诉你的?你咋这么容易相信
【在 h****n 的大作中提到】 : 谢谢!刚知道你是女的,太厉害了!
| h****n 发帖数: 2094 | 7 有个帖子叫你大婶 : )
【在 i***e 的大作中提到】 : 谁告诉你的?你咋这么容易相信
| i***e 发帖数: 9429 | 8 这个你也信,那我的帖子里同音字一大堆, 你到是没啥
【在 h****n 的大作中提到】 : 有个帖子叫你大婶 : )
|
|