由买买提看人间百态

boards

本页内容为未名空间相应帖子的节选和存档,一周内的贴子最多显示50字,超过一周显示500字 访问原贴
ME版 - 我昨天的 公司招人 的帖子谁删了
相关主题
SolidWorks vs Autodesk Inventor创建3D模型,求帮助!
Mechanical Engineer position -- SF bay area.[Job] Mechanical Engineer IV at Applied Materials (转载)
机械工程(ME)硕士求推荐实习或者volunteer挂靠opt3D建模问题 coil end复杂弧形建模
mechanical engineer position推荐一个ME的工作机会,适合中国人
CFD 工作机会湾区Startup机械工程师职位
Immediate/Urgent FEA openings available in Bay AreaSPC 的讨论是在这里么
悄悄的问一句国际会议文章审稿
about ANSYS workbench and Solidworks苹果Plastics/Metals tooling engineer工作机会
相关话题的讨论汇总
话题: 8226话题: process话题: design话题: engineer
进入ME版参与讨论
1 (共1页)
s******t
发帖数: 1672
1
谁能提供个理由么?
y******r
发帖数: 2986
2
能够介绍一下你的职位,工作地点什么的么?
s******t
发帖数: 1672
3
这两天 HM 已经收到了一些简历。面试从明天也开始要了。
祝好!
===============
要求如下。
最主要的两点要求:
1。 有高压操作的经验。 我们的反应器可能要用到4000psi。
2。 要熟悉自动化控制的设备,仪器,软件等。
另外
3。 最好有根据操作条件,设计过程,选用设备的经验
4。 公司可办 H1b。工作地点在 Phoenix AZ
如果感兴趣,
或站内联系我也可以。
多谢!
=========================================================================
Job Title: Process Engineer, W2E
Department/Location: Engineering – Chandler, AZ
Reports To:
Date: 3/28/12
Purpose:
This position is responsible for optimizing the operation of a waste-water
to energy digester system. The Process Engineer will work closely with the
biochemical engineer to create an efficient process for the creation of
methane from biomass. An understanding of process controls, fluid flows,
data acquisition, and electrical and mechanical systems will be required.
The Process Engineer will need to be comfortable in both conceptual design
and analysis and hands-on implementation of the design.
Primary Duties and Responsibilities:
• Apply engineering and hands-on problem solving skills to take new
bio-digestion technology through proof of concept
• Develop process controls including sensors, valves, and pumps to
optimize a bio-digestion process.
• Perform integration of sensors and controls hardware into a PLC
based controller
• Work with in-house resources and outside contractors to implement
design changes to the digester system
• Collaborate with engineering team to address hardware design,
supplier, cost, assembly and serviceability issues.
• Develop a system level a subsystem levels schematics of all
electrical and mechanical inputs and outputs
• Use key tools for the development process - Design Validation
Planning & Review, Failure Mode Effect Analysis, 7 Step (8D, etc.) Problem
Solving, Design of Experiments (DOE), etc.
• Assist in the scale-up and transfer of the technology from the
proof of concept stage to the full scale implementation phase of product
development.
• Design and develop novel high pressure electrolyzers for the
dissociation of methane to hydrogen
Qualifications/Requirements:
• BS/MS Mechanical, Chemical or Industrial Engineering.
• 5 years of process development in a large scale treatment or
digestion application
• Proficiency in data acquisition and process automation software
and hardware
• Familiarity with high pressure vessels and plumbing, and
experience with high pressure electrolysis is preferred.
• Understanding of PLC programming and ladder logic
• Proficiency in SPC, PFMEA, Solidworks, Pro E, Unigraphics, or
other related CAD
• Experience with process simulators such as AspenPlus.
• Background knowledge of Waste Water Treatment of Digestion is
preferred

【在 y******r 的大作中提到】
: 能够介绍一下你的职位,工作地点什么的么?
s******t
发帖数: 1672
4
靠,你丫 sb 回帖把我帖子 标题都该了。 刚tmd 的发现。
你丫 这tmd 的什么心里。
已经找到人了。 没人想骗你 烂简历。

【在 y******r 的大作中提到】
: 能够介绍一下你的职位,工作地点什么的么?
1 (共1页)
进入ME版参与讨论
相关主题
苹果Plastics/Metals tooling engineer工作机会CFD 工作机会
无标题Immediate/Urgent FEA openings available in Bay Area
AutoCAD question悄悄的问一句
Solidworks 问题求教about ANSYS workbench and Solidworks
SolidWorks vs Autodesk Inventor创建3D模型,求帮助!
Mechanical Engineer position -- SF bay area.[Job] Mechanical Engineer IV at Applied Materials (转载)
机械工程(ME)硕士求推荐实习或者volunteer挂靠opt3D建模问题 coil end复杂弧形建模
mechanical engineer position推荐一个ME的工作机会,适合中国人
相关话题的讨论汇总
话题: 8226话题: process话题: design话题: engineer