l***i
发帖数: 38 | 1 what 's the difference between Macro and user defined subroutine. To define
the material properties for each element, can I use ANSYS macro or material
subroutine to do it? BTW, user subroutine has to be written in Fortran? Hope I
can't get help. Not many peope in my department knows how to answer this
question. | p**e
发帖数: 126 | 2 you need to spend sometime to read ansys/abaqus manual. just get an idea of
how the system is. no one can help you if you don't know the basic.
don't take it personal, but it does not seem that you know the software
packages much although you may know the FEM theory. that is probably they
thought you were not good at industrial engineering problem. you probably
should spend some time reading before preparing for next interview.
it is not hard, just spend sometime reading
I
【在 l***i 的大作中提到】
: what 's the difference between Macro and user defined subroutine. To define
: the material properties for each element, can I use ANSYS macro or material
: subroutine to do it? BTW, user subroutine has to be written in Fortran? Hope I
: can't get help. Not many peope in my department knows how to answer this
: question.
| t*******y
发帖数: 57 | 3 Macro is the input script to custimize the simulation using the Ansys command
itself.95%+ cases can be solved in this way. According to user defined
subroutine(UPF in ansys or UMAT in abacus),you are not suggested to use them
if
they are not a must.
I
【在 l***i 的大作中提到】
: what 's the difference between Macro and user defined subroutine. To define
: the material properties for each element, can I use ANSYS macro or material
: subroutine to do it? BTW, user subroutine has to be written in Fortran? Hope I
: can't get help. Not many peope in my department knows how to answer this
: question.
|
|
