A***N 发帖数: 219 | 1 Samples are collected for TGA, and surface detection
CNTs were synthesized on the SS mesh, coated with catalysts.
I made the solution of 100% ethanol, sonicated it, and heated the solution
till dry.
To avoid boil the solution, which may blow away the sample, I just set
the Hot plate at the mildly hot temperature. All my setting leds to the
drying process for three days per run.
Since time is limited for me to send the samples to be detected, I am
wondering if there is any alternatives that can s |
S*****n 发帖数: 6055 | 2 不要假设别人做CNT都用得跟你一样的过程
你这个描述,反正我是看不懂。。。
【在 A***N 的大作中提到】 : Samples are collected for TGA, and surface detection : CNTs were synthesized on the SS mesh, coated with catalysts. : I made the solution of 100% ethanol, sonicated it, and heated the solution : till dry. : To avoid boil the solution, which may blow away the sample, I just set : the Hot plate at the mildly hot temperature. All my setting leds to the : drying process for three days per run. : Since time is limited for me to send the samples to be detected, I am : wondering if there is any alternatives that can s
|
w********g 发帖数: 186 | 3 less EtOH or use aceton which will evaporize more rapidly
【在 A***N 的大作中提到】 : Samples are collected for TGA, and surface detection : CNTs were synthesized on the SS mesh, coated with catalysts. : I made the solution of 100% ethanol, sonicated it, and heated the solution : till dry. : To avoid boil the solution, which may blow away the sample, I just set : the Hot plate at the mildly hot temperature. All my setting leds to the : drying process for three days per run. : Since time is limited for me to send the samples to be detected, I am : wondering if there is any alternatives that can s
|
w********g 发帖数: 186 | 4 在不锈钢上面长的
估计要做aligned growth
然后酒精里面超声然后把酒精蒸掉拿粉末去做TGA
不过我觉得没啥必要做TGA
这样的样品用TGA能看出来啥...
【在 S*****n 的大作中提到】 : 不要假设别人做CNT都用得跟你一样的过程 : 你这个描述,反正我是看不懂。。。
|
A***N 发帖数: 219 | 5 谢谢你帮我解释了一下。我是用火焰合成法,两分钟能得到最长10微米左右,3毫克左
右的纳米结构材料,现在做了SEM/TEM,还要做Raman,顺便也把TGA和表面测一下。
之所以想做TGA是因为原先我把我的样品(没从不锈钢上移除,TEM证明的确有cnt)直
接放在chamber里通空气在500C下加热了一个小时,但前后质量没有变化,我和导师都
觉得奇怪,所以想做TGA。
【在 w********g 的大作中提到】 : 在不锈钢上面长的 : 估计要做aligned growth : 然后酒精里面超声然后把酒精蒸掉拿粉末去做TGA : 不过我觉得没啥必要做TGA : 这样的样品用TGA能看出来啥...
|
w********g 发帖数: 186 | 6 1.你能确定你的天平真的这么准?
2.你能确定你的样品里面都是什么管子?
500C差不多MWNT才开始...SWNT都没了,大管径的DWNT可能还剩一点
【在 A***N 的大作中提到】 : 谢谢你帮我解释了一下。我是用火焰合成法,两分钟能得到最长10微米左右,3毫克左 : 右的纳米结构材料,现在做了SEM/TEM,还要做Raman,顺便也把TGA和表面测一下。 : 之所以想做TGA是因为原先我把我的样品(没从不锈钢上移除,TEM证明的确有cnt)直 : 接放在chamber里通空气在500C下加热了一个小时,但前后质量没有变化,我和导师都 : 觉得奇怪,所以想做TGA。
|
A***N 发帖数: 219 | 7 1.可以精确到一微克;
2.多壁的;
that makes sense.
原先加热到500C是想烧掉unburned hydrocarbon radicals,因为正好有位教授来做讲座
,说到450C就能把杂质氧化得差不多,我先试了450C,用TEM看了一下,发现没有什么
变化,回来又加到500C,好像变化也不大。
很奇怪
感觉就是不同方式做出的CNT,其特性会差挺多的。比如不同group做出的单壁管,TGA
的起始变化温度就会有50~100 C的差别。现在我就想尽可能把我做的CNT的特征给表达
彻底。
【在 w********g 的大作中提到】 : 1.你能确定你的天平真的这么准? : 2.你能确定你的样品里面都是什么管子? : 500C差不多MWNT才开始...SWNT都没了,大管径的DWNT可能还剩一点 :
|
w********g 发帖数: 186 | 8 u got it
不过100C的差别如果号称管径分布一样
八成就是purity和quality的关系了
TGA
【在 A***N 的大作中提到】 : 1.可以精确到一微克; : 2.多壁的; : that makes sense. : 原先加热到500C是想烧掉unburned hydrocarbon radicals,因为正好有位教授来做讲座 : ,说到450C就能把杂质氧化得差不多,我先试了450C,用TEM看了一下,发现没有什么 : 变化,回来又加到500C,好像变化也不大。 : 很奇怪 : 感觉就是不同方式做出的CNT,其特性会差挺多的。比如不同group做出的单壁管,TGA : 的起始变化温度就会有50~100 C的差别。现在我就想尽可能把我做的CNT的特征给表达 : 彻底。
|
S*****n 发帖数: 6055 | 9 跟催化剂很有关系
催化剂会催化碳的燃烧的,呵呵
【在 w********g 的大作中提到】 : u got it : 不过100C的差别如果号称管径分布一样 : 八成就是purity和quality的关系了 : : TGA
|
w********g 发帖数: 186 | 10 算在purity里面啊
【在 S*****n 的大作中提到】 : 跟催化剂很有关系 : 催化剂会催化碳的燃烧的,呵呵
|