M*j
发帖数: 3534 | 1 以前没用过IGO，一直在用TT
看了“iGO primo 8.5.9.142958 - 最新发布”贴，下了primo和地图，折腾了好久分辨
率的问题，
终于折腾好了
但软件启动后，没有地图，/content/map下面原有Basemap文件，我又把所有下载到的
Maps_8.3NTQ_2009.Q4_NA.zip里面的文件都unzip到了map文件夹里。即便如此，软件里
还是
load不到地图，选find->find address->select country or state，里面列表是空白
的。
但如果我把MAP文件改成别的名字（比如MAPS），软件启动时直接就会提示“map files
could not
be found”
请问应该如何设置。 |
a**8
发帖数: 26 | 2 Make sure you have the full set of maps for the give region in your CONTENT\
MAP folder. |
M*j
发帖数: 3534 | 3 inside the content/map folder, there is a Basemap file, which comes
originally with the software, and there are a 'Canada_NNG_20091022' and
thirty 'USA_XXX_NNG_20091022' (XXX is Arizona, or California, or colorado
...), all the thirty-one (30+1) files are from a downloaded zip file.
CONTENT\
【在 a**8 的大作中提到】
: Make sure you have the full set of maps for the give region in your CONTENT\
: MAP folder.
|
g********h
发帖数: 365 | 4 是不是里面还有目录?
应该把fbl文件直接放在map目录里
【在 M*j 的大作中提到】
: inside the content/map folder, there is a Basemap file, which comes
: originally with the software, and there are a 'Canada_NNG_20091022' and
: thirty 'USA_XXX_NNG_20091022' (XXX is Arizona, or California, or colorado
: ...), all the thirty-one (30+1) files are from a downloaded zip file.
:
: CONTENT\
|
a**8
发帖数: 26 | 5 Did you set
[folders]
app="My Flash Disk/Primo"
content="storage card/Primo/content"
in your sys.txt file? |
M*j
发帖数: 3534 | 6 我的程序和地图都在CF卡上（CF Card）
[folders]
app="CF Card/Primo"
content="CF Card/Primo/content"
请问有什么疏漏么？
【在 a**8 的大作中提到】
: Did you set
: [folders]
: app="My Flash Disk/Primo"
: content="storage card/Primo/content"
: in your sys.txt file?
|
a**8
发帖数: 26 | 7 Not sure, please try
Copy Primo folder to "My Flash Disk/Primo",include sys.txt, etc..., leave
map and pio at CF card/Primo/content,
then run exe from My Flash Disk/Primo folder
good luck. |
