p***g 发帖数: 1727 | 1 第一帖:
I will tell you what I did, but please understand that I am not a cell phone
modding guru.
I followed these instructions, and entered the different numbers as they
were asked for. I got the numbers from my old phone, if that isn't possible
for you, you can get them by calling Page Plus.
1.dial ##626*
2. Enter subsidy code 333333 -
Fast NAM programming: MDN, MIN, CDMA Home SID
Enter each number as it is asked for. Once you are done, the phone will
reset, and is now programmed.
At this point the phone is programmed, but will still not be able to make or
receive calls or SMS. The last step is to update the PRL (Primary Roaming
List), this is a list of tower id numbers that the phone is allowed to talk
to. Before you go any further make sure that the correct USB drivers for the
phone are installed on your computer, the drivers will attempt to install
the first time you connect your phone to your PC, let them. Now that that is
done, you will need to find a copy of a PRL that will work with Page Plus.
I found This older PRL, moddified for Sprint type phones, to not show as
roaming all of the time. I found that PRL on Howard Forums, I didn't modify
it, or anything else, I shamelessly swiped it. Download this file, and unzip
it, you will need it.
What I did was download a program called QPST, set it up (I had to go into
the configuration and add my ports (by default no ports are added, and it
won't see your phone, as soon as I added all of the ports, especially the
USB port, it saw the phone). Once QPST is set up and sees the phone, go to
the "Roam" tab, and click "read from phone", it will bring up some
information, once it does look in the "preferred roaming" box in the center,
click on "browse" and browse to the folder you unzipped the PRL file to.
select the file, and then click on "write to phone", once that is complete
the phone should reset again. Once it comes back up you should be able to
make and receive calls and SMS texts.
This is as far as I have made it with mine, I picked it up yesterday evening
late, and didn't even open it until I got off work today. I may work on the
data shortly, but to tell the truth this little bit of information I have
shared is more than I am comfortable with. Once again I am no guru, and if
something goes terribly wrong as you do it (and it can and does happen), I
will not be able to provide much help, not because I don't want to, but
because I don't know how.
第二贴:
This is why I was hesitant to post that I had gotten it to work on Page Plus.
YOU WILL NOT BE ABLE TO OTA PROGRAM THIS PHONE WITH PAGE PLUS. YOU WILL HAVE
TO MANUALLY PROGRAM THIS PHONE TO WORK WITH PAGE PLUS.
Sorry for shouting, but it think that it not only bears repeating, but
repeating loud enough to be heard over the noise of people saving money.
As I stated fairly clearly in my first post in this thread, if you are not
familiar with manual programming of a phone, or using software tools such as
QPST, CDMA Workshop, or something like that, you need to read up a little
on those tools, if after learning what those tools are and what you would
need them for, you are still comfortable with the idea then this deal is for
you.
If you are not willing to do anything more involved than calling Page Plus
and dialing *22890, then this phone isn't going to work for you. Page Plus
will not help you much, as they didn't sell you the phone, they didn't make
any money on the phone, and they know nothing whatsoever about that phone.
Page Plus has no obligation to help you program this phone, they offer a
selection of fine new and refurbished phones that they are more than happy
to fully support. If you choose to buy a phone set up to use on a non
compatible carrier's network, you are on your own, and that is how it should
be.
原帖:
http://www.fatwallet.com/forums/hot-deals/1174495/?start=0
刷机过程在第二页。
不管你们有没有看懂,我反正是没看懂,汗。。。那些值改的我晕头转向,没明白应该先做哪一步后做哪一步,不过贴里有几个已经搞定了,但是他们好像是已有page plus,做的是ESN SWAP,哪位能给写个把原手机号(现在用的net10家的号),转到cricket zte score上在page plus家激活的攻略呢?最好是能有个1,2,3,4的详细步骤,期待高手出马,写好后,tjhaven老大会发包子吧???
几个问题:
1.cricket应该用的是sprint家的网络,那这个ESN需要先change到verzion吗?
2.以前帮朋友激活page plus的时候,ESN和MEID好像都是一样的,A打头的一串数值。这个zte score,ESN和MEID是不一样的,该怎么处理?
3.想保留现在net10的手机号的话,需要先完成哪些刷机工作?再打电话给net10放号,page plus那里port号 | s***h 发帖数: 50 | 2 可能最容易的是,借用一个verizon的旧手机,开通pageplus, 根据这个成功激活了pageplus的旧手机的设置,手动设置zte score,upload prl, 再打电话给pageplus swap ESN. | p***g 发帖数: 1727 | 3 恩,根据这个帖子,你说的是最方便可靠的办法。就是得费一个verizon的旧手机呀,
哪能借到?
pageplus的旧手机的设置,手动设置zte score,upload prl, 再打电话给pageplus
swap ESN.
【在 s***h 的大作中提到】 : 可能最容易的是,借用一个verizon的旧手机,开通pageplus, 根据这个成功激活了pageplus的旧手机的设置,手动设置zte score,upload prl, 再打电话给pageplus swap ESN.
| a9 发帖数: 21638 | 4 关键是手动设置zte咋设啊?
【在 p***g 的大作中提到】 : 恩,根据这个帖子,你说的是最方便可靠的办法。就是得费一个verizon的旧手机呀, : 哪能借到? : : pageplus的旧手机的设置,手动设置zte score,upload prl, 再打电话给pageplus : swap ESN.
| a****l 发帖数: 8211 | 5 looks like not easy to get it working on pp.
phone
possible
【在 p***g 的大作中提到】 : 第一帖: : I will tell you what I did, but please understand that I am not a cell phone : modding guru. : I followed these instructions, and entered the different numbers as they : were asked for. I got the numbers from my old phone, if that isn't possible : for you, you can get them by calling Page Plus. : 1.dial ##626* : 2. Enter subsidy code 333333 - : Fast NAM programming: MDN, MIN, CDMA Home SID : Enter each number as it is asked for. Once you are done, the phone will
| s***h 发帖数: 50 | 6 借一个别人淘汰的verizon的旧手机,ESN swap完再还回去.
根据这个成功激活了pageplus的旧手机的MDN, MIN, CDMA Home SID, 设置新手机的相
应参数。 | t*****n 发帖数: 4908 | 7 几个问题:
1.cricket应该用的是sprint家的网络,那这个ESN需要先change到verzion吗?
刷机就是搞一个能在verzion用的ESN/MEID
2.以前帮朋友激活page plus的时候,ESN和MEID好像都是一样的,A打头的一串数值。
这个zte score,ESN和MEID是不一样的,该怎么处理?
ESN可以和MEID不一样。MEID的位数长。我都是打电话给PP客服激活手机。他们要什么
我就给什么。
3.想保留现在net10的手机号的话,需要先完成哪些刷机工作?再打电话给net10放号,
page plus那里port号
你port号码和激活手机同时完成。先确保手机可用,esn是clean的,处于未激活状态。
然后电话net10要到account number and passcode。电话PP port号码。port完成后
net10就不能用了。再次电话PP激活手机。 | G*****h 发帖数: 33134 | 8 偶还没搞,看了半天,是要先手工打电话激活,找一个现成的 ESN 换过去
不知道 ebay 上卖的那种 pageplus activation 有用没用
是不是这样激活了就不用旧电话的这些号码了。
另外 ESN 是啥
1.dial ##626*
2. Enter subsidy code 333333 -
Fast NAM programming: MDN, MIN, CDMA Home SID
I got those numbers from my old phone, MDN is your phone number, the MSID I
got from my old phone, on a Pixi Plus you should be able to go to "Device
Info", then touch "More info".
Also from here you can easily find SID for your area.
http://bounce.fatwallet.com/redirect/bounce.php?afsrc=1&mid=167
MDN = 10 digit working phone number from my active pageplus phone.
MIN = 10 digit number in my daily email from Kitty Wireless (assigned by
Pageplus).
MSID = 2 I live in Californa, Los Angeles/Orange County
这个 MIN 好像就是从 ebay pageplus activation 那里弄来的,pageplus 给发的号
新号码激活大概可以这样搞,不需要老的 pageplus phone。
如果你有老 pageplus phone, 能看到老 MIN
再打电话给 PagePlus 手工 switch ESN or MEID:
First, I got my MIN from my old phone, you can check yourself.
You can just call PagePlus to switch ESN or MEID. After the new ESN or MEID
is put into Pageplus' system. you don't need to do automatic programming,
like dial *22890. You may just make a call from your new phone. it may work
and you can use your new phone.
然后是用 QPST 刷 PRL
这个人还得在 QPST 额外改了些设置:
OK, finally got it up and running. Had to change some settings under the
AMPS and CDMA-2 tabs, but phone was able make an outbound call successfully.
What I noticed was that the AMPS phone num were still set to the 999999xxxx
number, so I changed that to my number. Also changed the Home SID from 0 to
2 (Calif-LA). For CDMA-2, did the same for IMSI_S and changed the phone
number to my phone number.
【在 t*****n 的大作中提到】 : 几个问题: : 1.cricket应该用的是sprint家的网络,那这个ESN需要先change到verzion吗? : 刷机就是搞一个能在verzion用的ESN/MEID : 2.以前帮朋友激活page plus的时候,ESN和MEID好像都是一样的,A打头的一串数值。 : 这个zte score,ESN和MEID是不一样的,该怎么处理? : ESN可以和MEID不一样。MEID的位数长。我都是打电话给PP客服激活手机。他们要什么 : 我就给什么。 : 3.想保留现在net10的手机号的话,需要先完成哪些刷机工作?再打电话给net10放号, : page plus那里port号 : 你port号码和激活手机同时完成。先确保手机可用,esn是clean的,处于未激活状态。
| t*****n 发帖数: 4908 | 9 flash的工作就是把其他网络bad esn变成verzion clean esn,然后可以在PP上激活。
ebay act是有手机有esn以后的事情,分配新号码同时激活手机。你如果是port号码到
PP的话可以直接找PP,免费。不然就是到ebay上买个服务。
关于MDN, MIN, CDMA Home SID,可以看视频。
I
【在 G*****h 的大作中提到】 : 偶还没搞,看了半天,是要先手工打电话激活,找一个现成的 ESN 换过去 : 不知道 ebay 上卖的那种 pageplus activation 有用没用 : 是不是这样激活了就不用旧电话的这些号码了。 : 另外 ESN 是啥 : 1.dial ##626* : 2. Enter subsidy code 333333 - : Fast NAM programming: MDN, MIN, CDMA Home SID : I got those numbers from my old phone, MDN is your phone number, the MSID I : got from my old phone, on a Pixi Plus you should be able to go to "Device : Info", then touch "More info".
| z********u 发帖数: 1031 | 10 我感觉思路应该是这样
用原机的esn/meid 激活pageplus
之后查询pageplus分配的MIN
最后手工改手机的MIN | | | G*****h 发帖数: 33134 | 11 你说的 flash 是指啥?啥是 bad ESN?
是这几个步骤?
http://www.kittywireless.com/pageplus/pageplusmanualprogramming
【在 t*****n 的大作中提到】 : flash的工作就是把其他网络bad esn变成verzion clean esn,然后可以在PP上激活。 : ebay act是有手机有esn以后的事情,分配新号码同时激活手机。你如果是port号码到 : PP的话可以直接找PP,免费。不然就是到ebay上买个服务。 : 关于MDN, MIN, CDMA Home SID,可以看视频。 : : I
| d****n 发帖数: 12461 | 12 我到qpst那里就弄不动了,连在usb上面在软件的port里面没发现手机。 | G*****h 发帖数: 33134 | 13 没有原机怎么办?能直接激活新机么?
【在 z********u 的大作中提到】 : 我感觉思路应该是这样 : 用原机的esn/meid 激活pageplus : 之后查询pageplus分配的MIN : 最后手工改手机的MIN
| G*****h 发帖数: 33134 | 14 这个还是要淘一个旧机先
能直接激活新机么?
【在 t*****n 的大作中提到】 : flash的工作就是把其他网络bad esn变成verzion clean esn,然后可以在PP上激活。 : ebay act是有手机有esn以后的事情,分配新号码同时激活手机。你如果是port号码到 : PP的话可以直接找PP,免费。不然就是到ebay上买个服务。 : 关于MDN, MIN, CDMA Home SID,可以看视频。 : : I
| z********u 发帖数: 1031 | 15
笔误了 原机=新机
就是用买来的zte的 esn/meid激活
【在 G*****h 的大作中提到】 : 没有原机怎么办?能直接激活新机么?
| G*****h 发帖数: 33134 | 16 手机的 usb debug mode 开了么?
【在 d****n 的大作中提到】 : 我到qpst那里就弄不动了,连在usb上面在软件的port里面没发现手机。
| G*****h 发帖数: 33134 | 17 这个激活是要在 ebay 买个 pageplus activation 吧
或者 altamesa 的免费服务?
http://www.mitbbs.com/clubarticle_t2/Prepaid/15657.html
【在 z********u 的大作中提到】 : : 笔误了 原机=新机 : 就是用买来的zte的 esn/meid激活
| z********u 发帖数: 1031 | 18
在ebay买服务吧
直接给他esn zipcode就行
激活成功之后应该是没信号的 然后去kittywireless查min
手工写入手机就行
最后用qpst换prl voicemail 设置
我帮同学激活了很多sprint手机在pageplus上面 都是这么做的
【在 G*****h 的大作中提到】 : 这个激活是要在 ebay 买个 pageplus activation 吧 : 或者 altamesa 的免费服务? : http://www.mitbbs.com/clubarticle_t2/Prepaid/15657.html
| G*****h 发帖数: 33134 | 19 看来比较清楚了
偶先激活下,占个号,偶现在还不想付费,不用担心小孩乱打出电话 hehe
你这手工写入手机就是指这个吧
1.dial ##626*
2. Enter subsidy code 333333 -
Fast NAM programming: MDN, MIN, CDMA Home SID
【在 z********u 的大作中提到】 : : 在ebay买服务吧 : 直接给他esn zipcode就行 : 激活成功之后应该是没信号的 然后去kittywireless查min : 手工写入手机就行 : 最后用qpst换prl voicemail 设置 : 我帮同学激活了很多sprint手机在pageplus上面 都是这么做的
| z********u 发帖数: 1031 | 20
对!!!!
【在 G*****h 的大作中提到】 : 看来比较清楚了 : 偶先激活下,占个号,偶现在还不想付费,不用担心小孩乱打出电话 hehe : 你这手工写入手机就是指这个吧 : 1.dial ##626* : 2. Enter subsidy code 333333 - : Fast NAM programming: MDN, MIN, CDMA Home SID
| | | d****n 发帖数: 12461 | 21 开不开都一样啊。
【在 G*****h 的大作中提到】 : 手机的 usb debug mode 开了么?
| z********u 发帖数: 1031 | 22
可能是qpst版本太旧了
我遇到过这事情 optimus s 死活识别不出
【在 d****n 的大作中提到】 : 我到qpst那里就弄不动了,连在usb上面在软件的port里面没发现手机。
| a9 发帖数: 21638 | 23 要加端口号。
从设备管理器里找出来端口号,我的是com6。而qpst里好像只有1和2
【在 z********u 的大作中提到】 : : 可能是qpst版本太旧了 : 我遇到过这事情 optimus s 死活识别不出
| B*****g 发帖数: 34098 | 24 去ebay缴费?
【在 G*****h 的大作中提到】 : 看来比较清楚了 : 偶先激活下,占个号,偶现在还不想付费,不用担心小孩乱打出电话 hehe : 你这手工写入手机就是指这个吧 : 1.dial ##626* : 2. Enter subsidy code 333333 - : Fast NAM programming: MDN, MIN, CDMA Home SID
| G*****h 发帖数: 33134 | 25 很容易,$0.99 一个叫 directcomarketing 的,
看俺是 Cricket ZTE,激活了 MIN 都告诉俺了
偶还在犹豫,如果不马上激活的话,不会过期吧
另外不知道 data plan 有没有戏
【在 B*****g 的大作中提到】 : 去ebay缴费?
| t*****n 发帖数: 4908 | 26 recursive已经激活了。等他的好消息吧。
发信人: recursive (递归), 信区: Prepaid
标 题: Re: BB 3* vitality root并激活pageplus
发信站: BBS 未名空间站 (Mon Mar 19 14:39:08 2012, 美东)
晚上回去试试
这个是准备给老妈过来的时候用的,有没有data不重要。。
http://www.mitbbs.com/clubarticle_t/Prepaid/22091.html
【在 G*****h 的大作中提到】 : 很容易,$0.99 一个叫 directcomarketing 的, : 看俺是 Cricket ZTE,激活了 MIN 都告诉俺了 : 偶还在犹豫,如果不马上激活的话,不会过期吧 : 另外不知道 data plan 有没有戏
| G*****h 发帖数: 33134 | 27 激活看来是没问题
不知道 data 行不行。。。得寸进尺啊
【在 t*****n 的大作中提到】 : recursive已经激活了。等他的好消息吧。 : 发信人: recursive (递归), 信区: Prepaid : 标 题: Re: BB 3* vitality root并激活pageplus : 发信站: BBS 未名空间站 (Mon Mar 19 14:39:08 2012, 美东) : 晚上回去试试 : 这个是准备给老妈过来的时候用的,有没有data不重要。。 : http://www.mitbbs.com/clubarticle_t/Prepaid/22091.html
| t*****n 发帖数: 4908 | 28 他正准备试data,估计很快有结果。
【在 G*****h 的大作中提到】 : 激活看来是没问题 : 不知道 data 行不行。。。得寸进尺啊
|
|