h****l 发帖数: 7290 | 1 enter the BIOS when startup, if there is a option of
detect HD, try it, or you can setup the parameter manually,
on the manual or the surface of HD, you can find those
parameter.
But first of all, make sure all jumpers are set correctly. | h****l 发帖数: 7290 | 2 of coz you should set it to be master.
Try this way, set the HD to be master and connect it to the
1st IDE ports, and set the CD-ROM to be master and connect it to
the second IDE port.
NOTE: some HD sould be set as single instead of master if no slave
and some CD-ROM on some Mother board should be set as Cable in staed of
master if no slave. |
|