D********r
发帖数: 343 | 1 Leica cameras:
Youxin Ye
w**[email protected]
Extensive experience in Leica M cameras, from screw mount to M6, not
servicing M6TTL - M8. Might service some old lenses with very cheap rates.
Great service and short turn-around time, very competitive rates when
compared with DAG and Sherry.
Leica lenses:
DAG, Don Goldberg,
d****[email protected]
http://www.dagcamera.com/
With the most extensive parts available, long-term veteran and trained Leica specialist. Rates typically fair but turn-around time is usu |
p**o
发帖数: 3409 | 2 我的M6，前一个owner寄给DAG做了CLA兼换MP finder，
结果ASA dial uncoupling的问题没发现。
发信去问DAG，他说他只是把dial拨到100，
看测光没问题就OK了，没拨到其他档测试……
第二次CLA倒是认真做了，而且一天之内搞定寄了回来。 |
D********r
发帖数: 343 | 3 That sometimes happens. It is very tedious to do a CLA.
【在 p**o 的大作中提到】
: 我的M6，前一个owner寄给DAG做了CLA兼换MP finder，
: 结果ASA dial uncoupling的问题没发现。
: 发信去问DAG，他说他只是把dial拨到100，
: 看测光没问题就OK了，没拨到其他档测试……
: 第二次CLA倒是认真做了，而且一天之内搞定寄了回来。
|
f**********e
发帖数: 1994 | 4 Used Sherry several times for lens CLA. (Summaron, DR-Summicron, 35 Cron)
Average turn over time = 3-4 weeks, quality of work is acceptable. Cleaned
out the fogging of Summaron. |
c******s
发帖数: 5583 | |
D********r
发帖数: 343 | 6 Added Steve's Camera for R-D1 repair and an authorized Hexar RF repair center |
