e******o
发帖数: 1160 | 1 用的dockstar，装的archlinux，安装的asterisk 1.8，很是奇怪，打中国电话老是出错
。。。。。
dockstar*CLI> sip show peers
Name/username Host Dyn Force
rport ACL Port Status
1001/1001 192.168.1.138 D N
A 5060 OK (215 ms)
1002 (Unspecified) D N
0 Unmonitored
SipGate/xxx 204.155.28.10 N
5060 OK (24 ms)
nonoh/bbbb 77.72.169.134 N
5060 OK (192 ms)
4 sip peers [Monitored: 3 online, 0 offline Unmonitored: 0 online, 1 offline
]
== Using SIP RTP CoS mark 5
-- Executing [01186xxxxxxx@outbound:1] Dial("SIP/1001-00000000", "SIP/01
1********[email protected],120,tr") in new stack
== Using SIP RTP CoS mark 5
-- Called SIP/0**********[email protected]
[Dec 26 15:49:47] NOTICE[3142]: chan_sip.c:19556 handle_response_invite: Fai
led to authenticate on INVITE to '"1001" ;tag=as26fa
5e64'
-- SIP/192.168.1.122-00000001 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Auto fallthrough, channel 'SIP/1001-00000000' status is 'CONGESTION'
从log上看好像是密码的问题，但是我用账号名和密码能登陆进去。
下面是sip.conf的：
[general]
register => sip_acc:s*****[email protected]/1001
context=default ; Default context for incoming calls
allowoverlap=no ; Disable overlap dialing support. (Default
is yes)
bindport=5060 ; UDP Port to bind to (SIP standard port is
5060)
bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to al
l)
tcpenable=yes ; Enable server for incoming TCP connections
(default is no)
tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.
0.0 binds to all interfac
es)
srvlookup=yes ; Enable DNS SRV lookups on outbound calls
externhost=xxxxxx.xxxxx.com
;externrefresh=120
;localnet=192.168.0.0/255.255.0.0
nat=yes
alwaysauthreject=yes
allowguest=no
[1001]
secret=888888
type=friend
host=dynamic
context=outbound
outgoinglimit=1
incominglimit=1
canreinvite=no
transport=udp
;deny=0.0.0.0/0.0.0.0
permit=192.168.0.0/255.255.0.0
;nat=no
nat=yeS
qualify=yes
disallow=all
allow=alaw
allow=ulaw
allow=gsm
dtmfmode=rfc2833
[SipGate]
disallow=all
username=sip_acc
type=peer
;type=friend
secret=sip_pwd
nat=yes
insecure=invite
host=sipgate.com
fromuser=sip_acc
fromdomain=sipgate.com
context=outbound
canreinvite=no
caninvite=no
allow=ulaw
allow=alaw
qualify=yes
outboundproxy=proxy.live.sipgate.com
dtmfmode=rfc2833
[nonoh]
disallow=all
username=nonoh_acc
type=peer
secret=nonoh_pwd
nat=yes
insecure=invite
host=sip.nonoh.net
fromuser=nonh_acc
fromdomain=sip.nonoh.net
context=outbound
canreinvite=no
caninvite=no
qualify=yes
allow=ulaw
allow=alaw
下面是我的externsions。conf
[general]
static=yes
writeprotect=no
clearglobalvars=no
[globals]
CONSOLE=Console/dsp ; Console interface for demo
IAXINFO=guest ; IAXtel username/password
TRUNK=Zap/G2 ; Trunk interface
TRUNKMSD=1 ; MSD digits to strip (usual
ly 1 or 0)
[default]
exten => s,1,Set(CALLERID(name)=${DB(cidname/${CALLERID(num)})})
exten => s,n,Dial(SIP/1001,10)
exten => s,n, Hangup
exten => 1001, 1, Dial(SIP/1001, 60)
exten => 1002, 1, Dial(SIP/1002, 60)
[google-in]
exten => [email protected], 1, GotoIf(${DB_EXISTS(gv_dialout/channel)}?bridged)
exten => [email protected], n, NoOp(Callerid ${CALLERID(name)})
exten => [email protected], n, Set(CALLERID(num)=${SHIFT(CALLERID(name),@)})
exten => [email protected], n, Set(CALLERID(name)=${DB(cidname/${CALLERID(num)})})
exten => [email protected], n, Answer
exten => [email protected], n, Wait(2)
exten => [email protected], n, SendDTMF(1)
exten => [email protected], n, Dial(SIP/1001, 180, )
exten => [email protected], n(bridged),Bridge(${DB_DELETE(gv_dialout/channel)}, p)
[outbound]
include => to-china
include => seven-digit
include => local-devices
include => tollfree
include => talk-gmail-outbound
include => talk-numeric-outbound
include => dial-uri
[to-china]
;exten => _01186X.,1,Set(CALLERID(num)=14086925678)
exten => 01186NX.,1,Dial(SIP/${EXTEN}@nonoh,50,trg)
exten => 01186NX.,n,Congestion
exten => 011X.,1,Hangup
[local-devices]
exten => _1, 1, Dial(SIP/1001,10)
exten => 1001, 1, Dial(SIP/1001,60)
exten => _2, 1, Dial(SIP/1002,60)
exten => 1002, 1, Dial(SIP/1002,60)
[tollfree]
exten => _411, 1, Dial(SIP/1*********[email protected],60)
exten => _1800NXXXXXX,1,Dial(SIP/${EXTEN}@SipGate,60)
exten => _1888NXXXXXX,1,Dial(SIP/${EXTEN}@SipGate,60)
exten => _1877NXXXXXX,1,Dial(SIP/${EXTEN}@SipGate,60)
exten => _1866NXXXXXX,1,Dial(SIP/${EXTEN}@SipGate,60)
[seven-digit]
exten => _NXXXXXX,1,Set(CALLERID(dnid)=1408${CALLERID(dnid)})
exten => _NXXXXXX,n,Goto(1408${EXTEN},1)
exten => _NXXNXXXXXX,1,Set(CALLERID(dnid)=1${CALLERID(dnid)})
exten => _NXXNXXXXXX,n,Goto(1${EXTEN},1)
[talk-gmail-outbound]
exten => _[a-z][email protected],1,Dial(Gtalk/x/${EXTEN}@gmail.com)
exten => _[A-Z][email protected],1,Dial(Gtalk/x/${EXTEN}@gmail.com)
[talk-numeric-outbound]
exten => _1NXXNXXXXXX,1,Dial(Gtalk/x/${EXTEN}@voice.google.com)
exten => _+1NXXNXXXXXX,1,Dial(Gtalk/x/${EXTEN}@voice.google.com)
[gv-agi-outbound]
exten => _1NXXNXXXXXX,1,AGI(google-voice-dialout.agi)
exten => _+1NXXNXXXXXX,1,AGI(google-voice-dialout.agi)
[dial-uri]
exten => _[a-z].,1,Dial(SIP/${EXTEN}@${SIPDOMAIN},120,tr)
exten => _[A-Z].,1,Dial(SIP/${EXTEN}@${SIPDOMAIN},120,tr)
exten => _X.,1,Dial(SIP/${EXTEN}@${SIPDOMAIN},120,tr) | i**w
发帖数: 883 | 2 to_china的pattern match写错了吧，丢了起始的下划线
出错
Force
【在 e******o 的大作中提到】
: 用的dockstar，装的archlinux，安装的asterisk 1.8，很是奇怪，打中国电话老是出错
: 。。。。。
: dockstar*CLI> sip show peers
: Name/username Host Dyn Force
: rport ACL Port Status
: 1001/1001 192.168.1.138 D N
: A 5060 OK (215 ms)
: 1002 (Unspecified) D N
: 0 Unmonitored
: SipGate/xxx 204.155.28.10 N
| e******o
发帖数: 1160 | 3 呵呵，提醒我了，确实是这个地方出错，但是错误更正如下：
exten => _01186X.,1,Set(CALLERID(num)=xxxxxx)
exten => _01186X.,n,Dial(SIP/${EXTEN}@nonoh,50,trg)
exten => _01186X.,n,Hangup
【在 i**w 的大作中提到】
: to_china的pattern match写错了吧，丢了起始的下划线
:
: 出错
: Force
:
:
:
| a9
发帖数: 21638 | 4 ?
还有错误吗？
【在 e******o 的大作中提到】
: 呵呵，提醒我了，确实是这个地方出错，但是错误更正如下：
: exten => _01186X.,1,Set(CALLERID(num)=xxxxxx)
: exten => _01186X.,n,Dial(SIP/${EXTEN}@nonoh,50,trg)
: exten => _01186X.,n,Hangup
| e******o
发帖数: 1160 | 5 现在可以了~~~
【在 a9 的大作中提到】
: ?
: 还有错误吗？
|
|
