t*****2
发帖数: 55 | 1 今天刚收到，试着装WINXP （手里只有XP的安装CD），在load完各种驱动之后给出蓝屏
错误信息如下：
a prolem has been detected and windows has been shut down to prevent damage
to your computer.
if this is the first time you 've seen this stop error screen, restart your
computer, if appears again, follow these steps:
check to be sure you have adequate disk space. if a driver is identified in
to stop mesage, disable the driver or check with the manufacturer for driver
updates. try changing video adapters.
check with your hardware vendor for a | a***e
发帖数: 1010 | 2 in BIOS, change your SATA harddrive from AHCI (?) to compatible mode. | t*****2
发帖数: 55 | 3 i did that too, still got the same error message, but thanks for your
information.
I also run the hard drive diagnosis from bios, the results is 'pass'. so seems the hard drive is fine. | s*****e
发帖数: 1090 | 4 你还是装win7吧，晚上找找下个企业版。
装xp驱动可能都找不全。
damage
your
in
driver
memory
【在 t*****2 的大作中提到】
: 今天刚收到，试着装WINXP （手里只有XP的安装CD），在load完各种驱动之后给出蓝屏
: 错误信息如下：
: a prolem has been detected and windows has been shut down to prevent damage
: to your computer.
: if this is the first time you 've seen this stop error screen, restart your
: computer, if appears again, follow these steps:
: check to be sure you have adequate disk space. if a driver is identified in
: to stop mesage, disable the driver or check with the manufacturer for driver
: updates. try changing video adapters.
: check with your hardware vendor for a
| c******y
发帖数: 3269 | 5 lz把硬盘拆下来，在别的电脑上装好xp，然后硬盘装回去试试能否顺利启动 | t*****2
发帖数: 55 | 6 managed to install a win7. However the in-built camera is not working though
its driver is up to date.
I tried to use Fn+F6 to open the camera, no response.
Any ideas guys ?
many thanks |
|
