i******t 发帖数: 11048 | 1 ramp是不是比jack stand 方便一点?
有什么ramp推荐的? |
i*****t 发帖数: 24265 | |
p*****y 发帖数: 1049 | |
s******2 发帖数: 852 | 4 买个pump从上面吸更好,穿着西装都可以换,呵呵 |
f********o 发帖数: 863 | 5 领带会不会弄脏!
【在 s******2 的大作中提到】 : 买个pump从上面吸更好,穿着西装都可以换,呵呵
|
w**********u 发帖数: 913 | 6 It is MUCH MORE convenient than a jack/jack stand, especially when you own a
heavy jack. But there is one thing you should be careful. As you certainly
don't want to drive your car off the ramp when there is no oil in the engine
, you should keep in mind that the car on the ramp is not on an even surface
, so using the dipstick to measure the oil level now is NOT quite accurate.
In general overfilling a little bit oil is not a big problem, but you still
should avoid it if you can.
【在 i******t 的大作中提到】 : ramp是不是比jack stand 方便一点? : 有什么ramp推荐的?
|
h****y 发帖数: 9234 | 7 可不可以买2对ramp.
四个轮全上去,就平了..
a
certainly
engine
surface
.
still
【在 w**********u 的大作中提到】 : It is MUCH MORE convenient than a jack/jack stand, especially when you own a : heavy jack. But there is one thing you should be careful. As you certainly : don't want to drive your car off the ramp when there is no oil in the engine : , you should keep in mind that the car on the ramp is not on an even surface : , so using the dipstick to measure the oil level now is NOT quite accurate. : In general overfilling a little bit oil is not a big problem, but you still : should avoid it if you can.
|
w**********u 发帖数: 913 | 8 impossible for most passenger cars, as you cannot insert the ramp beneath
the frame.
【在 h****y 的大作中提到】 : 可不可以买2对ramp. : 四个轮全上去,就平了.. : : a : certainly : engine : surface : . : still
|
c*******r 发帖数: 6971 | 9 不可能,因为ramp塞不进车下
【在 h****y 的大作中提到】 : 可不可以买2对ramp. : 四个轮全上去,就平了.. : : a : certainly : engine : surface : . : still
|
s****i 发帖数: 5469 | 10 ramp下面空间大点,以后动其它的东西可能还用得上,建议再买一对wheel blocker。
【在 i******t 的大作中提到】 : ramp是不是比jack stand 方便一点? : 有什么ramp推荐的?
|
|
|
y*****2 发帖数: 223 | 11 我前一阵也考虑过,但是担心从上面吸没有从下面放的干净,比如说油泥什么,没换过
,只是担心,有懂的没?
【在 s******2 的大作中提到】 : 买个pump从上面吸更好,穿着西装都可以换,呵呵
|
a*******a 发帖数: 4212 | |
b*******r 发帖数: 6655 | 13 不象在买买提挖坑那么轻松, 自己试试看吧
【在 a*******a 的大作中提到】 : 自已有房子的话挖个坑就行了。
|
s******2 发帖数: 852 | 14 这个要看你是什么车,有些车的dipstick位置是专门设计过,可以从上面吸的(位置偏
后,后,reach到了底部)。
比如我的车dealer那里换油的标准程序都是从上面吸。
我也搜索了一下,网上也有争论,有说吸好的,有说还是传统的放好;哎,差不多就行
了。
【在 y*****2 的大作中提到】 : 我前一阵也考虑过,但是担心从上面吸没有从下面放的干净,比如说油泥什么,没换过 : ,只是担心,有懂的没?
|
f********o 发帖数: 863 | 15 我想这么换Transmission oil, 哪有卖这种吸油装置的!
【在 s******2 的大作中提到】 : 这个要看你是什么车,有些车的dipstick位置是专门设计过,可以从上面吸的(位置偏 : 后,后,reach到了底部)。 : 比如我的车dealer那里换油的标准程序都是从上面吸。 : 我也搜索了一下,网上也有争论,有说吸好的,有说还是传统的放好;哎,差不多就行 : 了。
|
s******2 发帖数: 852 | 16 这个
http://www.northerntool.com/shop/tools/product_390306_390306
【在 f********o 的大作中提到】 : 我想这么换Transmission oil, 哪有卖这种吸油装置的!
|
f*o 发帖数: 654 | 17 大部分欧车可以
bmw 3系没有dipstick了。。。
【在 s******2 的大作中提到】 : 这个要看你是什么车,有些车的dipstick位置是专门设计过,可以从上面吸的(位置偏 : 后,后,reach到了底部)。 : 比如我的车dealer那里换油的标准程序都是从上面吸。 : 我也搜索了一下,网上也有争论,有说吸好的,有说还是传统的放好;哎,差不多就行 : 了。
|
f********o 发帖数: 863 | |
w**********u 发帖数: 913 | 19 useless, you can use the cooler line to change most of the oil
【在 f********o 的大作中提到】 : 我想这么换Transmission oil, 哪有卖这种吸油装置的!
|
f********o 发帖数: 863 | 20 这种方法换油很彻底!就是换油时需要开发动机!还需要知道哪条管是进cooler的,那条管是出
cooler的。
thank you for telling me this way!
【在 w**********u 的大作中提到】 : useless, you can use the cooler line to change most of the oil
|
|
|
c*********7 发帖数: 19373 | 21 买个SUV或Jeep,地盘高,直接伸手就行。或者换上那种水龙头试的开关,每次拧一下
就可以放油了20多块钱。 |
s****i 发帖数: 5469 | 22 多换两次就成,没必要去折腾那些管子,变速箱油并不需要换得很勤,而且对高里
程数的车来说换出来的太多了可能还有风险。
那条管是出
【在 f********o 的大作中提到】 : 这种方法换油很彻底!就是换油时需要开发动机!还需要知道哪条管是进cooler的,那条管是出 : cooler的。 : thank you for telling me this way!
|
f********o 发帖数: 863 | 23 谢谢你啊!俺这是第一次换变速器油!
关键是俺的车没有泄油阀门,非要把整个oil pan缷下来才行,才麻烦了!
【在 s****i 的大作中提到】 : 多换两次就成,没必要去折腾那些管子,变速箱油并不需要换得很勤,而且对高里 : 程数的车来说换出来的太多了可能还有风险。 : : 那条管是出
|
y*****2 发帖数: 223 | 24 请问那种水龙头式的开关英文名字叫什么?好用不?有没有安全隐患?
【在 c*********7 的大作中提到】 : 买个SUV或Jeep,地盘高,直接伸手就行。或者换上那种水龙头试的开关,每次拧一下 : 就可以放油了20多块钱。
|
y*****2 发帖数: 223 | 25 请问怎么知道能不能从上面吸?我的车是01年buick lesabre,请问可以不?
【在 s******2 的大作中提到】 : 这个要看你是什么车,有些车的dipstick位置是专门设计过,可以从上面吸的(位置偏 : 后,后,reach到了底部)。 : 比如我的车dealer那里换油的标准程序都是从上面吸。 : 我也搜索了一下,网上也有争论,有说吸好的,有说还是传统的放好;哎,差不多就行 : 了。
|
w**********u 发帖数: 913 | 26 没什么用
你左右还得换filter
【在 y*****2 的大作中提到】 : 请问那种水龙头式的开关英文名字叫什么?好用不?有没有安全隐患?
|
S***r 发帖数: 12443 | |
k**u 发帖数: 10502 | 28 Oil drain valve.
很方便。我现在换油都不用支车,开上斜坡,把油桶放车底下,一开开关油就放出来了
。油滤就从上面拆,完全不用钻到车底下干活了。
阀门有锁定装置,没啥安全隐患。
【在 y*****2 的大作中提到】 : 请问那种水龙头式的开关英文名字叫什么?好用不?有没有安全隐患?
|