s**********r 发帖数: 142 | 1 假设我的data rate 是1MHz
我的sampling rate是40MHz
不做任何filtering/average,我的error是多少?
是1M/40M 吗?
谢谢! |
i*****t 发帖数: 24265 | |
d***o 发帖数: 181 | |
a****l 发帖数: 8211 | 4 Are you talking about analog signal or digital signal? Digital signal don't
have "error", and analog signal don't have "data rate".
【在 s**********r 的大作中提到】 : 假设我的data rate 是1MHz : 我的sampling rate是40MHz : 不做任何filtering/average,我的error是多少? : 是1M/40M 吗? : 谢谢!
|
s**********r 发帖数: 142 | 5 it is digital signal.
I am analyzing if there is any error from sampling frequency variation. My
DAC sampling frequency is 40MHz, is there any error if it varys from 41MHz
or 39MHz?
t
【在 a****l 的大作中提到】 : Are you talking about analog signal or digital signal? Digital signal don't : have "error", and analog signal don't have "data rate".
|
s**********r 发帖数: 142 | 6 如果不考虑信号噪声
【在 i*****t 的大作中提到】 : noise如何?
|
s**********r 发帖数: 142 | 7 digital to digital
【在 d***o 的大作中提到】 : 不考虑quantize么
|
a****l 发帖数: 8211 | 8 of course. That's the reason why clock synchronization is so important.
【在 s**********r 的大作中提到】 : it is digital signal. : I am analyzing if there is any error from sampling frequency variation. My : DAC sampling frequency is 40MHz, is there any error if it varys from 41MHz : or 39MHz? : : : t
|
s**********r 发帖数: 142 | 9 谢谢
愿闻其详:假如没有clock synchronization, 如何分析上述的sampling error?
用moving average filter 可以reduce this error吗?
【在 a****l 的大作中提到】 : of course. That's the reason why clock synchronization is so important.
|
b**********g 发帖数: 32 | 10 已经是数字信号了,为什么还会出错?
Maybe you could provide a little more context?
【在 s**********r 的大作中提到】 : digital to digital
|
l***g 发帖数: 1035 | 11 跟你信号基频有关
【在 s**********r 的大作中提到】 : 假设我的data rate 是1MHz : 我的sampling rate是40MHz : 不做任何filtering/average,我的error是多少? : 是1M/40M 吗? : 谢谢!
|
z*****n 发帖数: 7639 | 12 在没有同步编码的情况下,你的receiver最终会
偏离采样区间。谈error rate没有意义。
【在 s**********r 的大作中提到】 : 假设我的data rate 是1MHz : 我的sampling rate是40MHz : 不做任何filtering/average,我的error是多少? : 是1M/40M 吗? : 谢谢!
|