C******8
发帖数: 30 | 1 下半年就要毕业了，是水处理的方向，做的研究方向主要是在实验室做实验，要找
industry工作了简历上却没有
什么亮眼的地方，请问一下各位有些什么流行的软件模型可以学习一下，为找工作做准
备的，谢谢了！ |
m*l
发帖数: 507 | 2 If you are doing process, the only thing you'll need to learn is AutoCAD.
Software not very useful for steady state calculations, which is still the
dominate way of designing today. You should be able to get most of your mass
balance and hydaulics done using excel.
I think get familiar with the design requirements is more useful. For
example, the ten states standards.
http://broward.org/WaterServices/Documents/states_standards_wastewater.pdf |
m*l
发帖数: 507 | 3 But if you are interested in modeling jobs such as water distribution
network and collection systems(storm or sanitary sewer) you should get
familiar with EPANET and SWMM. And for river systems, HECRAS.
Modeling software were build so that you don't need to worry about the
calculations, so don't get caught by the theories. Focus more on how the
software model the actual world. For example, in SWMM the surface runoff is
modeled as sheet flow on a sloped rectangle. |
k********y
发帖数: 3586 | 4 哇，谢谢专业人士的建议。。。
is
【在 m*l 的大作中提到】
: But if you are interested in modeling jobs such as water distribution
: network and collection systems(storm or sanitary sewer) you should get
: familiar with EPANET and SWMM. And for river systems, HECRAS.
: Modeling software were build so that you don't need to worry about the
: calculations, so don't get caught by the theories. Focus more on how the
: software model the actual world. For example, in SWMM the surface runoff is
: modeled as sheet flow on a sloped rectangle.
|
m*******e
发帖数: 438 | 5 A-ha! I think I just finally got the reason why my group is obsessed w/
hiring phd while the hardest software we use is Excel, but water resource
can get by with under-grads although they're using all sorts of fancy
models that I don't even know what the name stands for...so the simpler
the software, the more thoughts we need to put into solving the problem;
while the fancy models already built in those routines for us to follow,
we just implementing the tools, right?
is
【在 m*l 的大作中提到】
: But if you are interested in modeling jobs such as water distribution
: network and collection systems(storm or sanitary sewer) you should get
: familiar with EPANET and SWMM. And for river systems, HECRAS.
: Modeling software were build so that you don't need to worry about the
: calculations, so don't get caught by the theories. Focus more on how the
: software model the actual world. For example, in SWMM the surface runoff is
: modeled as sheet flow on a sloped rectangle.
|
m*******e
发帖数: 438 | 6 if wastewater treatment, there're some models out there; if drinking water
treatment, Excel is more than enough...
【在 C******8 的大作中提到】
: 下半年就要毕业了，是水处理的方向，做的研究方向主要是在实验室做实验，要找
: industry工作了简历上却没有
: 什么亮眼的地方，请问一下各位有些什么流行的软件模型可以学习一下，为找工作做准
: 备的，谢谢了！
|
l********7
发帖数: 466 | 7 今天学习公司的A2O设计软件，核心部分就84k的code，还锁起来的，看不到。 |
