l*******2 发帖数: 31 | 1 SIG M400 ENHANCED, 今天刚拿到,随便用手机照的,效果不好,各位见谅。下一步就
是把Handguard换掉,加红点。 |
j****N 发帖数: 1289 | |
k**8 发帖数: 2212 | |
W*****r 发帖数: 5681 | 4 Wow, came with all furniture? Congrats.
【在 l*******2 的大作中提到】 : SIG M400 ENHANCED, 今天刚拿到,随便用手机照的,效果不好,各位见谅。下一步就 : 是把Handguard换掉,加红点。
|
l*******2 发帖数: 31 | 5 功能倒是没多什么 就是用了一些Magpul的配件
【在 j****N 的大作中提到】 : 恭喜! : enhanced了那些功能?
|
T******s 发帖数: 1107 | 6 恭喜!
LZ能说下在哪入的货吗? 价格如何?
【在 l*******2 的大作中提到】 : SIG M400 ENHANCED, 今天刚拿到,随便用手机照的,效果不好,各位见谅。下一步就 : 是把Handguard换掉,加红点。
|
j*****v 发帖数: 7717 | |
p**x 发帖数: 6614 | 8 恭喜楼主啊,其实Magpul MOE handguard挺好的,也可以加rail,建议楼主考虑考虑
【在 l*******2 的大作中提到】 : SIG M400 ENHANCED, 今天刚拿到,随便用手机照的,效果不好,各位见谅。下一步就 : 是把Handguard换掉,加红点。
|
f*********n 发帖数: 11154 | |
F*****t 发帖数: 1138 | |
|
|
H******S 发帖数: 6011 | 11 Congratulations!!!
It looks really pretty. I don't think you need to do anymore modification
unless you really want to. |
w*****o 发帖数: 1806 | 12 别换quad rail,换完肯定后悔,是降级而不是升级。
要升级,可以考虑些serious的rail, 比如troy的TRX之类。 |
l*******2 发帖数: 31 | 13 GunBroker $1600
【在 T******s 的大作中提到】 : 恭喜! : LZ能说下在哪入的货吗? 价格如何?
|
l*******2 发帖数: 31 | 14 谢谢大家。我想换Geissele的MKI Rail可是哪都没货,Troy TRX 现在也没货 |
S**********s 发帖数: 4534 | 15 Get rid of that fsb for a low profile gas block, and slap on a noveske NSR.
I think even the 11" NSR handguard and barrel nut combo is no heavier than
the magpul carbine handguard plus delta ring. The key mod interface is the
way to go.
11" is the minimal handguard length to allow for thumb over bore grip in
average people.
【在 l*******2 的大作中提到】 : 谢谢大家。我想换Geissele的MKI Rail可是哪都没货,Troy TRX 现在也没货
|
j****N 发帖数: 1289 | 16 这个真漂亮
【在 S**********s 的大作中提到】 : Get rid of that fsb for a low profile gas block, and slap on a noveske NSR. : I think even the 11" NSR handguard and barrel nut combo is no heavier than : the magpul carbine handguard plus delta ring. The key mod interface is the : way to go. : 11" is the minimal handguard length to allow for thumb over bore grip in : average people.
|
h*******g 发帖数: 2201 | 17 Beautiful, and expensive. |
S**********s 发帖数: 4534 | 18 我主要看好的还是它比较轻。
也许那种直通式的carbon fiber free float tube更轻, 但想装配件就麻烦了。
【在 j****N 的大作中提到】 : 这个真漂亮
|
w*****o 发帖数: 1806 | 19 或者不动现在的profile, 用Troy的charlie rail, 跳过前瞄,省事而且效果很好。
原来我改PSA的时候考虑过这个方案。
http://store.troyind.com/Troy_BattleRail_Charlie_p/srai-chr-cxb |
S**********s 发帖数: 4534 | 20 carbine前瞄太近, 不好用, 装镜子也挡视线, 低倍镜子一团模糊。 |
h*********n 发帖数: 11319 | 21 Does it require special tool/gun smithing prececure to install free
float handguard? and what's the improvement?
I think 2MOA at 100yd is good enough for me and I'd rather go for super
light configuration.
Currently my parts are:
New Frontier stripped lower,
PSA ACS-L kit
BCM lightweight middy upper
Any handguard suggestions?
NSR.
than
the
in
content/blogs.dir/5/files/noveske-nsr-11-rail/IMG_0775-A-1100-MT.jpg
【在 S**********s 的大作中提到】 : Get rid of that fsb for a low profile gas block, and slap on a noveske NSR. : I think even the 11" NSR handguard and barrel nut combo is no heavier than : the magpul carbine handguard plus delta ring. The key mod interface is the : way to go. : 11" is the minimal handguard length to allow for thumb over bore grip in : average people.
|
w*****o 发帖数: 1806 | 22 还好吧,M4 carbine length很多啊。改前瞄移气管这种活我想到就抽抽,troy的
charlie该算是改free floating最简单的方案了吧。
【在 S**********s 的大作中提到】 : carbine前瞄太近, 不好用, 装镜子也挡视线, 低倍镜子一团模糊。
|