m********n
发帖数: 782 | 1 我家以前的trim是奶黄色的，现在要漆成ultra white。以前和现在都是semi gloss。
我们拿刷子直接网上刷，可是觉得那些凹凹凸凸的地方怎么也弄不匀，实在太难看了，
而且越涂觉得越难看，漆倒是上去了不少了。是不是做得不对啊 有经验的说说怎么回
事吧。。。 | g*****9
发帖数: 4125 | 2 To achieve a good smooth look on semi gloss trim, I suggest you spray, going
to a ligher color, you need at least 2 coats, do not spray too much (thick)
a coat at one time, it is better to have multiple of light coats.
【在 m********n 的大作中提到】
: 我家以前的trim是奶黄色的，现在要漆成ultra white。以前和现在都是semi gloss。
: 我们拿刷子直接网上刷，可是觉得那些凹凹凸凸的地方怎么也弄不匀，实在太难看了，
: 而且越涂觉得越难看，漆倒是上去了不少了。是不是做得不对啊 有经验的说说怎么回
: 事吧。。。
| f******k
发帖数: 26 | 3 我也想问这个问题呢，spray不行，baseboard都在墙上呢，拆下来spray太麻烦了。
going
thick)
【在 g*****9 的大作中提到】
: To achieve a good smooth look on semi gloss trim, I suggest you spray, going
: to a ligher color, you need at least 2 coats, do not spray too much (thick)
: a coat at one time, it is better to have multiple of light coats.
| g*****9
发帖数: 4125 | 4 If you have to paint a lot of the baseboard, take all of them off and spray
together will be much less work than to brush them over on the wall, plus
the look on it will be much better.
So pop all of them off first, lightly sand them over with a sanding block,
damp wipe, let dry, spray them 2 coats (wait for first coat to dry first),
put them back (you might want to label them in the back when you take off if
you are doing a lot of them)
I usually spray them in a area with out any wind or dust,
【在 f******k 的大作中提到】
: 我也想问这个问题呢，spray不行，baseboard都在墙上呢，拆下来spray太麻烦了。
:
: going
: thick)
| m********n
发帖数: 782 | 5 还有molding，门，门框，扶手，不可能都弄下来漆的
是不是应该先sand再漆？
spray
if
from
【在 g*****9 的大作中提到】
: If you have to paint a lot of the baseboard, take all of them off and spray
: together will be much less work than to brush them over on the wall, plus
: the look on it will be much better.
: So pop all of them off first, lightly sand them over with a sanding block,
: damp wipe, let dry, spray them 2 coats (wait for first coat to dry first),
: put them back (you might want to label them in the back when you take off if
: you are doing a lot of them)
: I usually spray them in a area with out any wind or dust,
| b*********r
发帖数: 501 | 6 I am planning to do the same job. My old paint is far from smooth. I am
thinking of tripping the old paint and then paint. Need some suggestions | g*****9
发帖数: 4125 | 7 To me, it is faster to take everything off first, you can never achieve the
same smooth look with a brush, but if you don't mind the brush stroke, you
can brush. You will spend a lot of time and masking tape (pull off before it
dry).
If old paint is still good (not peeling) and you only want to change color,
a damp wipe down is good enough, if not, light sanding is always a good idea
, I personally even sand with a very fine paper in between all the coats to
create the perfect finish.
Do you pla
【在 m********n 的大作中提到】
: 还有molding，门，门框，扶手，不可能都弄下来漆的
: 是不是应该先sand再漆？
:
: spray
: if
: from
| o****d
发帖数: 1346 | 8 我看网上说下baseboard的问题是可能把墙上的paint弄坏，墙又要重刷啦
the
it
,
idea
to
【在 g*****9 的大作中提到】
: To me, it is faster to take everything off first, you can never achieve the
: same smooth look with a brush, but if you don't mind the brush stroke, you
: can brush. You will spend a lot of time and masking tape (pull off before it
: dry).
: If old paint is still good (not peeling) and you only want to change color,
: a damp wipe down is good enough, if not, light sanding is always a good idea
: , I personally even sand with a very fine paper in between all the coats to
: create the perfect finish.
: Do you pla
| m********n
发帖数: 782 | 9 恩，wall也漆，所有都要漆。
the
it
,
idea
to
【在 g*****9 的大作中提到】
: To me, it is faster to take everything off first, you can never achieve the
: same smooth look with a brush, but if you don't mind the brush stroke, you
: can brush. You will spend a lot of time and masking tape (pull off before it
: dry).
: If old paint is still good (not peeling) and you only want to change color,
: a damp wipe down is good enough, if not, light sanding is always a good idea
: , I personally even sand with a very fine paper in between all the coats to
: create the perfect finish.
: Do you pla
| g*****9
发帖数: 4125 | 10 Do you plan to replace the carpet/flooring?
【在 m********n 的大作中提到】
: 恩，wall也漆，所有都要漆。
:
: the
: it
: ,
: idea
: to
| m********n
发帖数: 782 | 11 some yes, some no
【在 g*****9 的大作中提到】
: Do you plan to replace the carpet/flooring?
| g*****9
发帖数: 4125 | 12 Only if you don't know what you are doing.
If the baseboard was caulked to the wall, you will need to cut it with a
razor blade first, other wise it is possible to peel some sheet rock paper
with you.
【在 o****d 的大作中提到】
: 我看网上说下baseboard的问题是可能把墙上的paint弄坏，墙又要重刷啦
:
: the
: it
: ,
: idea
: to
| m********n
发帖数: 782 | 13 还有一个问题就是用spray的是不是还要特别买工具，自己家里那点活，是不是不cost
effective啊
spray
if
from
【在 g*****9 的大作中提到】
: If you have to paint a lot of the baseboard, take all of them off and spray
: together will be much less work than to brush them over on the wall, plus
: the look on it will be much better.
: So pop all of them off first, lightly sand them over with a sanding block,
: damp wipe, let dry, spray them 2 coats (wait for first coat to dry first),
: put them back (you might want to label them in the back when you take off if
: you are doing a lot of them)
: I usually spray them in a area with out any wind or dust,
|
|
