b**s 发帖数: 589 | 1 不只可否用于高分子?
另外,有谁知道基于高分子的快速生成3-D原型都有什么方法?
就是知道一个3-D的形状,要用高分子迅速生成模型
我知道的有Laser sintering 和3DP两种 |
b**s 发帖数: 589 | 2 真的没人对3-D microfabrication感兴趣吗?
多漂亮呀
【在 b**s 的大作中提到】 : 不只可否用于高分子? : 另外,有谁知道基于高分子的快速生成3-D原型都有什么方法? : 就是知道一个3-D的形状,要用高分子迅速生成模型 : 我知道的有Laser sintering 和3DP两种
|
t*****y 发帖数: 30 | 3 ha... that's too big. I can make it 1000 times smaller.
【在 b**s 的大作中提到】 : 真的没人对3-D microfabrication感兴趣吗? : 多漂亮呀
|
b**s 发帖数: 589 | 4 用什么方法?是不是3-D的?速度如何?
【在 t*****y 的大作中提到】 : ha... that's too big. I can make it 1000 times smaller.
|
t*****y 发帖数: 30 | 5 Car's speed or fabrication speed? :-)
It is quit slow because it is based on 3D scanning method instead of 2D
planery fab techniques. But I believe with the advances of technology,
multiple scan head would be possible so the throughput can be improved.
Anyway, it is still too early to talk about production.
3D scaffolds would be very useful in tissue engineering.
Still in China now? :-)
【在 b**s 的大作中提到】 : 用什么方法?是不是3-D的?速度如何?
|
b**s 发帖数: 589 | 6 Robocasting 能否用于 biodegradable polymer,现在我一直在思考这个问题,不知有
何建议?我们系这里马上有一个sandia来的faculty,听说在年底可以建一台Robocasting
的机器 |