w********h 发帖数: 12367 | 1 在审一篇稿子,中间有个问题不太清楚,
是一个polymer blend的AFM图,
一张图显示出polymer A的区域比polymer B height要高,
另一张图则说polymer A的区域比B的hardness要强,
但据我所知,B的stiffness, strength等等要比A强。
问题是:会不会高度使得hardness高呢?
文章是牛校的,投得也是很不错的杂志,
做了无比多的实验和图,
可惜没有很好的理论指导,
那些漂亮的图全是瞎做,
任一个technician都可以做的。
其中一处硬伤证明了作者对于polymer的无知。
大概最后结果不会拒掉,但大改是难免的了。 |
l***r 发帖数: 169 | 2
无知不要紧,肯学就行啊...啊..这年头有漂亮的图就好发文章啊...管他懂不懂,在好的杂
志灌上几篇水,就成专家了...然后就有人求你审文章了...
啊..老大,这不是你走过的道路么???????????????????
【在 w********h 的大作中提到】 : 在审一篇稿子,中间有个问题不太清楚, : 是一个polymer blend的AFM图, : 一张图显示出polymer A的区域比polymer B height要高, : 另一张图则说polymer A的区域比B的hardness要强, : 但据我所知,B的stiffness, strength等等要比A强。 : 问题是:会不会高度使得hardness高呢? : 文章是牛校的,投得也是很不错的杂志, : 做了无比多的实验和图, : 可惜没有很好的理论指导, : 那些漂亮的图全是瞎做,
|
z**h 发帖数: 224 | 3 one is height image, another is phase image?
【在 w********h 的大作中提到】 : 在审一篇稿子,中间有个问题不太清楚, : 是一个polymer blend的AFM图, : 一张图显示出polymer A的区域比polymer B height要高, : 另一张图则说polymer A的区域比B的hardness要强, : 但据我所知,B的stiffness, strength等等要比A强。 : 问题是:会不会高度使得hardness高呢? : 文章是牛校的,投得也是很不错的杂志, : 做了无比多的实验和图, : 可惜没有很好的理论指导, : 那些漂亮的图全是瞎做,
|
w********h 发帖数: 12367 | 4 I think their hardness image is not right.
one component should be harder than the other one.
those non-polymer people think crystalline polymer should be certainly harder
than amorphous one, haha....
already finished my review.
they will be astonished by my comments...
revise 去吧。。。
有很多领域的人认为polymer不就是拿来用用的么,
不懂polymer基本性质做了这么多没法解释但漂亮无比的彩图,
给他们点教训。ft....这两天全浪费掉了。。。
【在 z**h 的大作中提到】 : one is height image, another is phase image?
|
l***r 发帖数: 169 | 5
harder
靠,这是谁啊...
是啊..很多时候电镜照出来解释不了也白费啊...
【在 w********h 的大作中提到】 : I think their hardness image is not right. : one component should be harder than the other one. : those non-polymer people think crystalline polymer should be certainly harder : than amorphous one, haha.... : already finished my review. : they will be astonished by my comments... : revise 去吧。。。 : 有很多领域的人认为polymer不就是拿来用用的么, : 不懂polymer基本性质做了这么多没法解释但漂亮无比的彩图, : 给他们点教训。ft....这两天全浪费掉了。。。
|
S*****n 发帖数: 6055 | 6
you got it
phase image is effected by height.
【在 w********h 的大作中提到】 : 在审一篇稿子,中间有个问题不太清楚, : 是一个polymer blend的AFM图, : 一张图显示出polymer A的区域比polymer B height要高, : 另一张图则说polymer A的区域比B的hardness要强, : 但据我所知,B的stiffness, strength等等要比A强。 : 问题是:会不会高度使得hardness高呢? : 文章是牛校的,投得也是很不错的杂志, : 做了无比多的实验和图, : 可惜没有很好的理论指导, : 那些漂亮的图全是瞎做,
|