b******n 发帖数: 80 | 1 PbS QDs
用CdS quantum rods的方法做,怎么老会在aceton洗完后沉淀。有没有高手介绍下为什
么?
谢谢。 |
t***3 发帖数: 100 | 2 Could you please disclose more details? I might know something about it.
Thanks. |
b******n 发帖数: 80 | 3 感谢上帝,佛祖,真主安拉,圣母玛丽亚,终于有人回答我了。
1. 我将PbO 加入TOPO和Oleic acid加热至无色,然后S+TBP注入,全程在schlenk line
中做的。最后一团黑乎乎的,用aceton清洗完了,怎么都不溶解在toluene中。
2.然后用PbO加入Oleic acid和ODE中加热,完了加入bis(trimethylsilyl)sulfide在
ODE中,一会儿出现褐色,可以溶解于toluene中,但是好像颗粒非常大,我要大约在2.
2nm左右的。
谢谢,请问要在2.2nm可以溶解于toluene中最好办法是神码? |
t***3 发帖数: 100 | 4 wow,让我太受宠若惊了。我其实回复完以后每天都来看,感谢上帝,佛祖,真主安拉
,圣母玛丽亚,你终于update 细节了。
首先,2.2nm 很大吗?这个激子吸收峰在900以下啊,已经相当的小了。不知道你要
多大?一般而言降低注入温度(50C)能把吸收峰做到700nm 以下,再下就不会了。
另外几点我们实验室的经验,不要问我为什么:
1) 90% 的Oleaic acid 比较好;
2)小PbS dots 用乙醇与acetone 洗涤比较好;
3)加入oleylamine 可以提高小dots 合成的重现性;
4) PbO 与OA 混合后pump overnight。
你做PbS 做什么用? |
b******n 发帖数: 80 | 5 太阳能用的。
你说solvent 用TOPO还是ODE?PbO 与OA 一会儿就溶解了。还有S+TBP还有气泡,神码
样的反应呢?
我用schlenk line,气体是N2,要不要Ar好点?用了schlenk line还要over night? |
t***3 发帖数: 100 | 6 Wow, I worked with PbS CQD photovoltaics for years.
I recommend ODE as the solvent, non-toxic and easy to wash. PbO could
dissolve in OA quickly, however, the side product H2O is better pump out.
Otherwise, it involves in the reaction and might form some oxides on the
surface.
N2 is totally final; if you could afford Ar, then use Ar just to make you
feel more confident. |
b******n 发帖数: 80 | 7 帅哥,我合成出来是Pb:S=4:1.颜色为红色开始,慢慢变成褐色。这个是不是到了2.
2nm了。周末没有机器测试真是郁闷啊。 |