i**z 发帖数: 1592 | 1 brad, pin, finish,farming四种钉子的钉枪都不一样?没有一个订枪能定这三种钉子
的?
每种订枪还有大小,16g, 18g.
16g的抢能用18g的钉子不?
这要是种钉子买把枪就出大发了 |
u****q 发帖数: 24345 | |
w******u 发帖数: 5413 | 3 赞简洁不明了。。。
【在 u****q 的大作中提到】 : 不 : 没 : 不
|
p**********g 发帖数: 9558 | 4 像便秘.........
【在 w******u 的大作中提到】 : 赞简洁不明了。。。
|
w******u 发帖数: 5413 | 5 憋大招用的。。。
【在 p**********g 的大作中提到】 : 像便秘.........
|
a********a 发帖数: 3082 | 6 brad=18g 平头,finish=15/16g 平头
有16g/18g combo的钉枪,不建议买,因为贵而且不可靠 |
i**z 发帖数: 1592 | 7 那我主要用订baseboard,和顶上的molding, 选哪个钉子的好点?
尼嘛想想,这一套搞下来起码200刀,我要订的钉子估计都还没有200颗呢,成本超过1
刀一颗钉子
【在 a********a 的大作中提到】 : brad=18g 平头,finish=15/16g 平头 : 有16g/18g combo的钉枪,不建议买,因为贵而且不可靠
|
c****o 发帖数: 32446 | |
p**********g 发帖数: 9558 | 9 租?
【在 c****o 的大作中提到】 : 对,这就是坑蛋之处,老夫所以一个都没买
|
u****q 发帖数: 24345 | 10 鄙视
【在 c****o 的大作中提到】 : 对,这就是坑蛋之处,老夫所以一个都没买
|
|
|
c****o 发帖数: 32446 | 11 穷人,给个包子吧
【在 u****q 的大作中提到】 : 鄙视
|
w******u 发帖数: 5413 | 12 要是你只弄baseboard,可以榔头+nail set解决。加上crown molding这个投资还是值得
大不了用完卖了
或者ws点
退!
1
【在 i**z 的大作中提到】 : 那我主要用订baseboard,和顶上的molding, 选哪个钉子的好点? : 尼嘛想想,这一套搞下来起码200刀,我要订的钉子估计都还没有200颗呢,成本超过1 : 刀一颗钉子
|
L**P 发帖数: 3792 | 13 其实经常钉子头不进去,一半的钉子我还是要用锤子补一下
值得
【在 w******u 的大作中提到】 : 要是你只弄baseboard,可以榔头+nail set解决。加上crown molding这个投资还是值得 : 大不了用完卖了 : 或者ws点 : 退! : : 1
|
h**********9 发帖数: 3252 | |
L**P 发帖数: 3792 | 15 需要2寸18g的brad nail
其实我一直搞不清楚brad nail和fnishi nail区别,好像没区别,就是说18g大小的
finish nail又叫brad nail,其他大小的fnishi nail就叫fnish nail
1
【在 i**z 的大作中提到】 : 那我主要用订baseboard,和顶上的molding, 选哪个钉子的好点? : 尼嘛想想,这一套搞下来起码200刀,我要订的钉子估计都还没有200颗呢,成本超过1 : 刀一颗钉子
|
a********a 发帖数: 3082 | 16 赶紧加入HFT的大家庭,18 brad nailer $16, nailer+stapler combo $15
1
【在 i**z 的大作中提到】 : 那我主要用订baseboard,和顶上的molding, 选哪个钉子的好点? : 尼嘛想想,这一套搞下来起码200刀,我要订的钉子估计都还没有200颗呢,成本超过1 : 刀一颗钉子
|
a********a 发帖数: 3082 | 17 俺想finish nail应该是泛称,就是finish up用的,同样framing nail是建frame的,
pin nail就是23g小pin
brad nail是特指18g 平头钉
【在 L**P 的大作中提到】 : 需要2寸18g的brad nail : 其实我一直搞不清楚brad nail和fnishi nail区别,好像没区别,就是说18g大小的 : finish nail又叫brad nail,其他大小的fnishi nail就叫fnish nail : : 1
|
L**P 发帖数: 3792 | 18 finshin nail = 平头钉?
【在 a********a 的大作中提到】 : 俺想finish nail应该是泛称,就是finish up用的,同样framing nail是建frame的, : pin nail就是23g小pin : brad nail是特指18g 平头钉
|
i**z 发帖数: 1592 | 19 好像不是啊,平头的钉子,头都蛮大的。Finish的钉子有头,但是头挺小的。
【在 L**P 的大作中提到】 : finshin nail = 平头钉?
|
i**z 发帖数: 1592 | 20 你是哪个牌子的钉枪,我要记住坚决不买
【在 L**P 的大作中提到】 : 其实经常钉子头不进去,一半的钉子我还是要用锤子补一下 : : 值得
|
|
|
p**********g 发帖数: 9558 | 21 他是高富帅里面的牌子 - bosch
【在 i**z 的大作中提到】 : 你是哪个牌子的钉枪,我要记住坚决不买
|
w******u 发帖数: 5413 | 22 乒乒推荐的。。。
【在 i**z 的大作中提到】 : 你是哪个牌子的钉枪,我要记住坚决不买
|
u****q 发帖数: 24345 | 23 hft就没这个问题
【在 p**********g 的大作中提到】 : 他是高富帅里面的牌子 - bosch
|
L**P 发帖数: 3792 | 24
的表弟 bostich
【在 p**********g 的大作中提到】 : 他是高富帅里面的牌子 - bosch
|
i**z 发帖数: 1592 | 25 网上抄的科普:
Nails: The nails used by carpenters, illustrated in Fig. 161, are of four
different kinds, as follows: Common nails, A, which range in size from 3d (3
penny) to 60d box nails, other nails for common use being generally of this
type.
Finish nails, B, which range in size from Gd to lOd, and are used for
moldings, picture frames, and other places where it is required that the
nails should be as nearly invisible as possible. This shape of head may be
set beneath the surface with the least danger of splitting the wood. The
smaller sizes of this type of nail are called brads, or sprigs, and range in
sizes from 3/8" to 1 1/2" and are of different sizes of wire.
Casing nails, C, used for fastening casings, or inside finish, though the
finish nails are often used for this purpose. The heads of these nails are
supposed to enter the wood without tearing it, making only a clean round
hole.
Flooring nails, D, the most essential difference between this type of nail
and the finish or casing nail being the size of wire from which it is made,
which will, in most cases, allow the nail to be driven into moderately hard
wood without the necessity of boring a hole for each nail.
重点第二段"The smaller sizes of this type of nail are called brads, or
sprigs"
【在 i**z 的大作中提到】 : brad, pin, finish,farming四种钉子的钉枪都不一样?没有一个订枪能定这三种钉子 : 的? : 每种订枪还有大小,16g, 18g. : 16g的抢能用18g的钉子不? : 这要是种钉子买把枪就出大发了
|
u****q 发帖数: 24345 | 26 E文看不懂
(3
this
in
【在 i**z 的大作中提到】 : 网上抄的科普: : Nails: The nails used by carpenters, illustrated in Fig. 161, are of four : different kinds, as follows: Common nails, A, which range in size from 3d (3 : penny) to 60d box nails, other nails for common use being generally of this : type. : Finish nails, B, which range in size from Gd to lOd, and are used for : moldings, picture frames, and other places where it is required that the : nails should be as nearly invisible as possible. This shape of head may be : set beneath the surface with the least danger of splitting the wood. The : smaller sizes of this type of nail are called brads, or sprigs, and range in
|
p**********g 发帖数: 9558 | 27 法文呢?
【在 u****q 的大作中提到】 : E文看不懂 : : (3 : this : in
|
a***n 发帖数: 1616 | 28 Flooring nail最粗还不用打孔?老怀疑会把木头挤裂
所有钉枪都是。大家钉裂木头的概率多大?
木地板头排有的是打孔了钉再nail set
有的直接上finish nailer射,
那个好?似乎精细的都爱手工啊。。。
(3
this
in
【在 i**z 的大作中提到】 : 网上抄的科普: : Nails: The nails used by carpenters, illustrated in Fig. 161, are of four : different kinds, as follows: Common nails, A, which range in size from 3d (3 : penny) to 60d box nails, other nails for common use being generally of this : type. : Finish nails, B, which range in size from Gd to lOd, and are used for : moldings, picture frames, and other places where it is required that the : nails should be as nearly invisible as possible. This shape of head may be : set beneath the surface with the least danger of splitting the wood. The : smaller sizes of this type of nail are called brads, or sprigs, and range in
|
w******u 发帖数: 5413 | 29 钉的慢容易裂。。。。手工要钻孔
钉枪没听说钻孔?
【在 a***n 的大作中提到】 : Flooring nail最粗还不用打孔?老怀疑会把木头挤裂 : 所有钉枪都是。大家钉裂木头的概率多大? : 木地板头排有的是打孔了钉再nail set : 有的直接上finish nailer射, : 那个好?似乎精细的都爱手工啊。。。 : : (3 : this : in
|
i**z 发帖数: 1592 | 30 用小点的钉子
【在 a***n 的大作中提到】 : Flooring nail最粗还不用打孔?老怀疑会把木头挤裂 : 所有钉枪都是。大家钉裂木头的概率多大? : 木地板头排有的是打孔了钉再nail set : 有的直接上finish nailer射, : 那个好?似乎精细的都爱手工啊。。。 : : (3 : this : in
|
|
|
i**z 发帖数: 1592 | |